ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

2014年第45卷第5期共收錄53篇
1. Accession number: 20142217764231
  Title: Sliding mode control in electromagnetic-hydraulic hybrid anti-lock braking system
   Authors: Liu, Xuejun1, 2  ; He, Ren1 
   Author affiliation: 1     School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China
2  Department of Automotive Engineering, Guangxi Vocational and Technical College of Communications, Nanning 530023, China
  Corresponding author: He, R. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 1-7
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to promote the performance of the electromagnetic-hydraulic hybrid brake system when sudden stop occurs, a kind of hybrid system which adapts electromagnetic and hydraulic braking system was developed; it built a hydraulic mathematical model and a mathematical model of electromagnetic brake system which is different in low speed and high speed. Based on the force analysis of the 1/4 vehicle model, a sliding mode controller has been designed and hardware in loop experiment platform has also been constructed. The experiment which simulates on asphalt and ice road was made to compare with the commercial ABS at the same conditions. The results indicate that the hybrid brake system has more rapid responds time, more stable slip ratio controlling ability and less brake time than traditional hydraulic brake system. And at the same time, due to the electromagnetic braking system, the system's abrasion and the braking heat fading or thermal failure is falling.
  Number of references: 20
  Main heading: Braking performance
  Controlled terms: Electromagnetism  -  Experiments  -  Hardware  -  Hybrid systems  -  Hydraulic brakes  -  Hydraulics  -  Mathematical models  -  Sliding mode control
  Uncontrolled terms: Electromagnetic  -  Electromagnetic brakes  -  Electromagnetic braking  -  Experiment platforms  -  Hardware in loop simulation  -  Hybrid brake systems  -  Hydraulic brake systems  -  Sliding mode controller
  Classification code: 901.3 Engineering Research  -  731.1 Control Systems  -  701 Electricity and Magnetism  -  921 Mathematics  -                             663.1 Heavy Duty Motor Vehicles  -  605 Small Tools and Hardware  -  602 Mechanical Drives and Transmissions  -  632.1 Hydraulics
   DOI: 10.6041/j.issn.1000-1298.2014.05.001
   Database: Compendex

2. Accession number: 20142217764239
  Title: Numerical investigation of pressure fluctuations on axial-flow pump blades affected by tip-gap size
   Authors: Li, Yaojun1  ; Shen, Jinfeng1 ; Hong, Yiping1 ; Liu, Zhuqing1
   Author affiliation: 1  College of Water Resources and Civil Engineering, China Agricultural University, Beijing 100083, China
   Corresponding author: Li, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 59-64 58
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The effects of tip-gap size on the unsteady flow characteristics in an axial-flow pump at design flow rate were investigated using large-eddy simulation with sliding mesh technique. Five configurations with different tip-gap sizes were considered, and the tip-leakage vortexes and pressure pulsations of near tip zone on the blades were studied in detail. The results indicate that as the tip clearance increased from 0.001D2 to 0.003D2, the head and efficiency of the pump reduce by 6.2% and 5.6%, respectively. When the tip-gap is larger than 0.001D2, the dominant tip-leakage vortex extend to the pressure side of adjacent blade and the secondary tip leakage vortexes formed in the tip-gap region. Affected by the tip leakage vortex, the amplitude of the pressure pulsation of the monitoring point PP6 (on the pressure side and near the middle of the blade tip edge) increases with the tip-gap size. For different tip clearance configurations, the rotating frequency (fr) dominates the pressure pulsations of near tip zone on suction side of the blades, while the dominant frequency of near tip region on the pressure side changes with the tip-gap size.
   Number of references: 19
   Main heading: Vortex flow
   Controlled terms: Large eddy simulation  -  Leakage (fluid)
   Uncontrolled terms: Axial flow pump  -  Numerical investigations  -  Pressure fluctuation  -  Rotating frequencies  -  Sliding mesh technique  -  Tip clearance  -  Tip leakage vortex  -  Unsteady flow characteristics
   Classification code: 452.3 Industrial Wastes  -  631 Fluid Flow  -  631.1 Fluid Flow, General  -  921 Mathematics
   DOI: 10.6041/j.issn.1000-1298.2014.05.009
   Database: Compendex

3. Accession number: 20142217764243
  Title: Numerical simulation of unsteady cavitation flow in the casing of a centrifugal pump
   Authors: Si, Qiaorui1  ; Yuan, Shouqi1  ; Li, Xiaojun1 ; Yuan, Jianping1 ; Lu, Jiaxing1
   Author affiliation: 1  Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013, China
   Corresponding author: Yuan, S. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 84-90
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to study the cavitating flow at different stages of cavitation in the pump casing of a centrifugal pump, the topology blocking and structured mesh generation strategies was proposed on the domain of the pump. Taking full account of the near-wall region mesh quality, steady and unsteady cavitation simulation of the centrifugal pump has been proceed using the SST k-ω turbulence model combining with Rayleigh-Plesset cavitation model. Unsteady flow of the pump chamber and the force endured by the impeller were obtained under three NPSHa. The results show that cavitation increases the amplitude of pressure pulsation in pump casing sharply. Due to the presence of the wear-rings, amplitude of pressure pulsation at front side chamber is greater than back side chamber. Broadband pulsation frequency increase with the cavitation intensifies, especially at axis frequency. Intensification cavitation not only affects the flow pattern of the pump chamber, but also increases the radial and axial forces acting on the impeller.
   Number of references: 17
   Main heading: Cavitation
   Controlled terms: Centrifugal pumps  -  Computer simulation  -  Impellers  -  Numerical models  -  Turbulence models  -  Unsteady flow
   Uncontrolled terms: Cavitating flow  -  Cavitation model  -  Different stages  -  Near-wall region  -  Pressure pulsation  -  Pulsation frequency  -  Structured mesh  -  Unsteady cavitation
   Classification code: 601.2 Machine Components  -  618.2 Pumps  -  631.1 Fluid Flow, General  -  631.1.1 Liquid Dynamics  -  723.5 Computer Applications  -  921 Mathematics
   DOI: 10.6041/j.issn.1000-1298.2014.05.013
   Database: Compendex

4. Accession number: 20142217764274
  Title: Design and experiment of open thin-walled flexure joints of parallel robot
   Authors: Yu, Yueqing1  ; Ma, Lan1 ; Cui, Zhongwei1 ; Li, Yuan1
   Author affiliation: 1  College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China
   Corresponding author: Yu, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 284-290
  Language: Chinese
  ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Limited motion range and easily happened rotation axis drift are the main disadvantages of traditional flexible joint of parallel robot. In order to promote the performance of flexure joint, a new design of open thin-walled flexure joint was proposed. According to the range of motion of 3RRR parallel robot, the geometry of joint was calculated by using the motion range of joint and the required joint stiffness as design parameters. And the structure strength of joint was analyzed via ANSYS. Torsion is the deformation mode of the open thin-walled flexure joint. The advantages of 36 degrees motion range and fixed rotation axis are presented in this joint. The practical joint is made of 65Mn spring steel according to the designed joint geometry. The contrast experiments between leaf spring and open thin-walled flexure joints were carried out on a three DOF parallel robot experiment platform. The results show the designed open thin-walled flexure joint can accomplish trajectory tracking missions and the maximum relative error is 6.05%. Its superiority over the leaf spring joint is presented by the results.
   Number of references: 16
   Main heading: Thin walled structures
   Controlled terms: Design  -  Experiments  -  Leaf springs  -  Robots
   Uncontrolled terms: Contrast experiment  -  Experiment platforms  -  Flexure joints  -  Kinematic-pairs  -  Maximum relative errors  -  Parallel robots  -  Structure strength  -  Trajectory tracking
   Classification code: 408 Structural Design  -  601.2 Machine Components  -  731.5 Robotics  -  901.3 Engineering Research
   DOI: 10.6041/j.issn.1000-1298.2014.05.044
   Database: Compendex

5. Accession number: 20142217764273
  Title: Dynamics and control of parallel robot with compliant joints
   Authors: Tian, Hao1  ; Yu, Yueqing1 
   Author affiliation: 1  College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China
   Corresponding author: Yu, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 278-283
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The researches on dynamic modeling, characteristic analysis, control strategy design and dynamic performance analysis for the parallel robot with compliant joints, which had the property of large range motion, were carried out. Based on pseudo-rigid-body model, the characteristics of compliant joints were investigated and system model with large deformation compliant joints was set up. The dynamic equation was obtained based on Lagrange method. A reaching law sliding mode control strategy was designed to eliminate the vibration and the unmodelled dynamics caused by compliant joints and the model error made by inertia parameter perturbation. And the stability of control strategy was verified. Simulation results showed that dynamic model and control strategy were effective.
   Number of references: 19
   Main heading: Universal joints
   Controlled terms: Dynamics  -  Robots  -  Sliding mode control
   Uncontrolled terms: Characteristic analysis  -  Compliant joints  -  Dynamics and control  -  Modeling and control  -  Parallel robots  -  Pseudo-rigid body models  -  Reaching law  -  Stability of control
   Classification code: 601.2 Machine Components  -  731 Automatic Control Principles and Applications  -  931.1 Mechanics
   DOI: 10.6041/j.issn.1000-1298.2014.05.043
   Database: Compendex

6. Accession number: 20142217764246
  Title: Optimization design and test of vortex pump based on CFD orthogonal test
   Authors: Gao, Xiongfa1  ; Shi, Weidong1  ; Zhang, Desheng1 ; Zhang, Qihua1 ; Fang, Bo2
   Author affiliation: 1  Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013, China
2  Jiangsu Shangbaoluo Pump Industry Co., Ltd., Yangzhou 225800, China
   Corresponding author: Shi, W. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 101-106
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to acquire the main structure parameters impacting on performance of vortex pump and optimize the performance of the vortex pump, the orthogonal testing method was introduced. Impeller outer diameter D2, blade number Z, width of blade b2, impeller outlet blade angle β2 and impeller inlet blade angle β1 were chosen to be the main factors. So 16 sets of programs with 16 type of impellers were designed according to L16(45) orthogonal table. Optimum value range of each factor was preliminarily obtained through range analysis. Quadratic orthogonal test was conducted to investigate the effects of main factors and acquire the primary and secondary factors of the design parameters on the vortex pump, and an optimization scheme for further design was obtained. The internal flow field and experimental results of optimization scheme were compared with the original model, and it showed that pump inlet produced two back-flows with different degree; the back-flow loss of optimal model was less than that of the original model; the efficiency and the head of optimal model are both higher than those of the original model 4.2 percentage points and 10 m, respectively. The improved efficiency and head can meet the design requirements. The orthogonal testing method has some feasibility to the performance optimization of vortex pump.
   Number of references: 16
   Main heading: Design
   Controlled terms: Computational fluid dynamics  -  Computer simulation  -  Impellers  -  Inlet flow  -  Testing  -  Turbomachine blades
   Uncontrolled terms: Internal flow field  -  Optimization design  -  Optimization scheme  -  Orthogonal experiment  -  Orthogonal testing  -  Performance optimizations  -  Structure parameter  -  Vortex pumps
   Classification code: 408 Structural Design  -  423.2 Non Mechanical Properties of Building Materials: Test Methods  -  601.2 Machine Components  -  631.1 Fluid Flow, General  -  723.5 Computer Applications
   DOI: 10.6041/j.issn.1000-1298.2014.05.016
   Database: Compendex

7. Accession number: 20142217764279
  Title: Quartic generalized Bézier surfaces with multiple shape parameters and its continuity conditions
   Authors: Hu, Gang1, 2  ; Ji, Xiaomin1  ; Guo, Lei1
   Author affiliation: 1  Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China
2  School of Science, Xi'an University of Technology, Xi'an 710054, China
   Corresponding author: Ji, X. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 315-321
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: A new geometric model of quartic generalized Be?zier surfaces with multiple shape parameters was constructed by using a class of quartic generalized Bernstein basis functions. The proposed quartic generalized Be?zier surfaces inherit the outstanding properties of conventional Be?zier Surfaces, have a good performance on adjusting their shapes by changing shape control parameters, and have quartic Be?zier surfaces as their special cases. Some basic properties of the surfaces were analyzed, and the constructions of some special surfaces degenerated from the generalized surfaces were discussed. With the aim to tackle the problem that the engineering complex surfaces can not be constructed by a single surface, the continuity conditions of quartic generalized Be?zier surfaces with shape parameter were investigated. Based on the analysis of the basis functions, the conditions of G1 and G2 continuity between two adjacent quartic generalized Be?zier surfaces and the detail process to blend the two surfaces were proposed. In addition, some applications of the quartic generalized Be?zier surfaces in geometric modeling were discussed. The modeling examples show that the proposed method is effective and easy to implement and has extensive applications in constructing engineering complex surface.
   Number of references: 16
   Main heading: Geometry
   Controlled terms: Functions
   Uncontrolled terms: Basis functions  -  Complex surface  -  Continuity conditions  -  Generalized bernstein basis  -  Geometric modeling  -  Shape control  -  Shape parameters  -  Special surfaces
   Classification code: 921 Mathematics
   DOI: 10.6041/j.issn.1000-1298.2014.05.049
   Database: Compendex

8. Accession number: 20142217764232
  Title: Forces and moments computation, calibration and optimization of new tire test rig
   Authors: Guo, Konghui1  ; Yang, Yiyang1 ; Xu, Nan1 ; Chen, Ping1 ; Zhang, Lihao1
   Author affiliation: 1  State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130025, China
   Corresponding author: Guo, K. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 8-15
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Force and moment measurement accuracy of the tire test rig directly affects the accuracy of the tire data. A new type of tire test rig developed by research team was analyzed. Based on multi-body dynamics theory, the mechanism of the attitude control of the test rig was analyzed and equation solver of force and moment of the test rig was derived. The accuracy of equation solver was verified by abaqus which is finite element software. Then the test rig which had been designed and processed was calibrated. The results showed that forces in three directions were in good agreement with the calibration, while moments were not particularly desirable. A reasonable assumption was made that the space bias of hard-point at the hinged of six power cylinder of tire test rig was existed. Then the identification and optimization of spatial coordinates were made. The results showed that the optimized forces and moments in three directions were in good agreement with the calibration. Force accuracy was higher than 0.75% and torque precision can reach about 1%. Results proved that hinged misalignment assumptions were reasonable, also indicated the potential of this new test rig on the test accuracy.
   Number of references: 16
   Main heading: Calibration
   Controlled terms: ABAQUS  -  Attitude control  -  Finite element method  -  Optimization
   Uncontrolled terms: Equation solvers  -  Finite element software  -  Forces and moments  -  Moment measurements  -  Multi-body dynamic  -  Six degrees of freedom  -  Spatial coordinates  -  Tire test
   Classification code: 944 Moisture, Pressure and Temperature, and Radiation Measuring Instruments  -  943 Mechanical and Miscellaneous Measuring Instruments  -  942 Electric and Electronic Measuring Instruments  -  941 Acoustical and Optical Measuring Instruments  -  921 Mathematics  -  656.1 Space Flight  -  421 Strength of Building Materials; Mechanical Properties
   DOI: 10.6041/j.issn.1000-1298.2014.05.002
   Database: Compendex

9. Accession number: 20142217764282
  Title: Experiment on ionized gas jet assisted cutting of 304 stainless steel
  Authors: Liu, Xin1  ; Huang, Shuai1 ; Qu, Jiaojiao1 ; Xu, Wenji1 
  Author affiliation: 1  Key Laboratory for Precision and Non-Traditional Machining, Ministry of Education, Dalian University of Technology, Dalian 116024, China
   Corresponding author: Xu, W. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 334-339 346
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The ionized air assisted cutting is a cutting method, in which the ionized air is jetted to the cutting zone to achieve a lubricating and cooling effect. Friction and wear tests together with cutting tests of 304 stainless steel were conducted in the atmospheres of air, air jet, ionized air jet and nitrogen plasma jet, respectively. The results prove that the ionized air jet has a favorable cooling and lubricating performance. The friction coefficient decreases by about 46% compared with dry friction. The cutting force and the flank wear decrease by about 24% and 69%, respectively, compared with the dry cutting. The adhesive wear and the build-up edge also decrease significantly, and the friction and wear performance and the machinability of 304 stainless steel are remarkably raised.
   Number of references: 20
   Main heading: Air
   Controlled terms: Cutting  -  Friction  -  Gases  -  Ionization of gases  -  Jets  -  Lubrication  -  Stainless steel  -  Wear of materials
   Uncontrolled terms: 304 stainless steel  -  Cooling effects  -  Cutting forces  -  Friction and wear  -  Friction and wear performance  -  Friction coefficients  -  Ionized gas  -  Lubricating performance
   Classification code: 931.2 Physical Properties of Gases, Liquids and Solids  -  931.1 Mechanics  -  804 Chemical Products Generally  -  631.1 Fluid Flow, General  -  607.2 Lubrication  -  604.1 Metal Cutting  -  545.3 Steel
   DOI: 10.6041/j.issn.1000-1298.2014.05.052
   Database: Compendex

10. Accession number: 20142217764259
  Title: Gelatin properties of inulin in acidic solution
   Authors: Luo, Denglin1  ; Liu, Juan1 ; Xu, Wei1 ; Xu, Baocheng1 ; Li, Pengyan1
   Author affiliation: 1  College of Food and Bioengineering, Henan University of Science and Technology, Luoyang 471003, China
   Corresponding author: Luo, D. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 185-190
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: With the aim to explore the gelling rules, the stability and the textural properties of inulin under acidic conditions, and the effect of pH value on the gelatin were studied at different concentrations of inulin. The experimental results show that the gelling ability decreases and the gelling time increases with the decrease of pH value. The volumetric gel index increases with inulin content increase and decreases with pH value decrease. When pH value decreases to 1, gelatin can't be formed even the concentration of inulin solution is high as 60%. The water retention of gelatin increases with the increase of inulin content and the increase extent becomes weak as pH value decreases. The water retention of 60% gelatin increases by 9.4%, 5.75% and 5.47% compared with that of 40% gelatin at pH value 7, 5 and 3, respectively. The higher the inulin content is, the stabler the stability of gelatin to pH value is. The acid hydrolysis rates of 40% inulin gelatin are 1.35 and 2.97 times higher than that of 50% and 60% gelatins when the pH value equals 3 and the hydrolysis time is 24 h. Texture profile analysis shows that pH value has positive correlations with the hardness, strength, adhesiveness, cohesiveness and gumminess of gelatin. Differential scanning calorimetry analysis shows that the freezable water content of 50% gelatin increases to the maximum, 26.0%, when pH value decreases from 7.0 to 3.0.
   Number of references: 18
   Main heading: pH
   Controlled terms: Convergence of numerical methods  -  Differential scanning calorimetry  -  Gelation  -  Polysaccharides
   Uncontrolled terms: Acid hydrolysis  -  Acidic conditions  -  Acidic solutions  -  Gelatin  -  pH value  -  Positive correlations  -  Textural properties  -  Texture profile analysis
   Classification code: 801 Chemistry  -  801.1 Chemistry, General  -  802.3 Chemical Operations  -  804.1 Organic Compounds  -  921.6 Numerical Methods
   DOI: 10.6041/j.issn.1000-1298.2014.05.029
   Database: Compendex

11. Accession number: 20142217764272
  Title: Robot control using a hybrid controller composed of an adaptive controller and a PD controller
   Authors: He, Honglin1  ; Zhan, Xiaohuang1 ; Liu, Wenguang1 ; Feng, Liyao1
   Author affiliation: 1  School of Aeronautical Manufacturing Engineering, Nanchang Hangkong University, Nanchang 330063, China
   Corresponding author: He, H. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 271-277
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to improve the direct drive robot (DDR)'s trajectory tracking accuracy, a hybrid controller consisting of an adaptive sub-controller and a PD sub-controller was proposed. Firstly, the dynamical uncertainty of the robot was investigated while the uncertainty friction in the robot joints was modeled and the kinematics equation of the robot manipulator was derived. Then, a two close loops control system with position and speed feedback was built for the robot, and an adaptive controller being capable of identifying the uncertainties of the robot's manipulator was employed so as to compensate the control error brought from the robot's dynamic uncertainty. Moreover, a PD controller was embedded in the hybrid controller so as to improve the robot's tracking accuracy. With the aim to guarantee the stability of the system, an adaptive law was presented. Finally, simulations have been accomplished to validate the feasibility of the controller. The results show that the position error and speed tracking error of the robot are limited to -0.02°~0.03° and ±0.005 rad/s, which means that hybrid controller can make the robots track the desired trajectory with higher precision, and it exists widely application prospect.
   Number of references: 15
   Main heading: Controllers
   Controlled terms: Adaptive control systems  -  Manipulators  -  Robot applications  -  Robots  -  System stability
   Uncontrolled terms: Adaptive controllers  -  Application prospect  -  Desired trajectories  -  Direct-drive robot  -  Dynamic uncertainty  -  Kinematics equation  -  Trajectory tracking  -  Trajectory tracking control
   Classification code: 731 Automatic Control Principles and Applications  -  732.1 Control Equipment  -  961 Systems Science
   DOI: 10.6041/j.issn.1000-1298.2014.05.042
   Database: Compendex

12. Accession number: 20142217764251
  Title: Effects of late milk irrigation on water use efficiency and dry matter distribution of maize
   Authors: Dang, Hongkai1  ; Li, Wei1 ; Cao, Caiyun1 ; Zheng, Chunlian1 ; Ma, Junyong1 ; Li, Kejiang1 
   Author affiliation: 1  Dry-Land Farming Institute, Hebei Academy of Agriculture and Forestry Sciences, Hengshui 053000, China
   Corresponding author: Li, K. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 131-138
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Field experiments were conducted in the test station of Dry-land Farming Institute of Hebei Academy of Agricultural and Forestry Sciences during 2011-2012. Three summer maize cultivars, Xundan 20, Zhengdan 958 and Xianyu 335, were used as experimental materials. The measurements were taken on irrigation by three stages (Sep.20, Sep.25, Sep.30). The main results showed that compared with CK, different irrigation treatments during late milk period had increased the soil moisture by 2.92%~14.14% in 0~100 cm layer at harvest. The evapotranspiration amounts of maize were ranged within 380.67~434.91 mm, and different treatments from small to large were I9. 25, I9.20, I9.30 and CK. Different treatments also had effects on the dry matter distribution. The treatments of CK and I9.30 increased amount of assimilate storage in vegetative parts before silking to grains. I9.20 and I9.25 treatments, however, increased amount of assimilate storage in vegetative after silking to grains. Grain yield of I9.20 and I9.25 treatments were higher than those of other treatments. Water use efficiency for grain yield was range within 21.94~26.53 kg/m3, water use efficiency for grain yield of I9.25, I9.20 and I9.30 treatments were most obviously lower than that by CK treatment. This shows that at optimum irrigation time after milking, grain yield increases although water use efficiency for grain yield decreases. In comprehensive consideration of cultivating technique of high yield and efficiency for unified wheat and maize, the best time for irrigation was on 20~25 September.
   Number of references: 22
   Main heading: Irrigation
   Controlled terms: Cultivation  -  Efficiency  -  Grain (agricultural product)  -  Soil moisture  -  Water supply
   Uncontrolled terms: Different treatments  -  Dry matters  -  Experimental materials  -  Field experiment  -  Forestry science  -  Irrigation treatments  -  Summer maize  -  Water use efficiency
   Classification code: 446.1 Water Supply Systems  -  483.1 Soils and Soil Mechanics  -  821.3 Agricultural Methods  -  821.4 Agricultural Products  -  913.1 Production Engineering
   DOI: 10.6041/j.issn.1000-1298.2014.05.021
   Database: Compendex

13.  Accession number: 20142217764237
  Title: Investigations of combustion characteristics of diesel/ethanol-water compound combustion
   Authors: Yao, Chunde1  ; Wang, Jianyun1 ; Liu, Junheng1 ; Geng, Peng1
   Author affiliation: 1  State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China
   Corresponding author: Yao, C. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 44-50
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Experiments were carried out on a turbo-charged, inter-cooled, heavy duty truck's 6 cylinder diesel engine; ethanol-water blends (the volume fraction of water is 30%) were injected to the retrofitted intake pipe to realize diesel/ethanol-water blends compound combustion. The combustion characteristics and economic efficiency at several kinds of speeds and loads with different high diesel substitution rates (0%, 30%, 40%, 50% and 60%) were investigated in steady working condition. The results show that, compared with normal combustion mode, the diesel/ethanol-water blends compound combustion lead to the ignition timing delay, maximum rate of heat release and in-cylinder pressure peak rise, combustion duration shorten. When the engine work in low speed, the equivalent specific fuel consumption most decreases by 13%, and the effective thermal efficiency most increases by 8.3%; in high speed, the equivalent specific fuel consumption remains approximately constant, and the fuel economy can even be deteriorated slightly when the diesel substitution rates are more than 30%. The results can be used to guide the application of diesel/ethanol compound combustion in engine.
   Number of references: 15
   Main heading: Diesel engines
   Controlled terms: Combustion  -  Engines  -  Ethanol  -  Fuel economy
   Uncontrolled terms: Combustion characteristics  -  Diesel  -  Economic efficiency  -  Ethanol-water  -  Ignition timing delays  -  In-cylinder pressures  -  Maximum rate of heat release  -  Specific fuel consumption
   Classification code: 521 Fuel Combustion and Flame Research  -  521.1 Fuel Combustion  -  523 Liquid Fuels  -  612 Engines  -  612.2 Diesel Engines
   DOI: 10.6041/j.issn.1000-1298.2014.05.007
   Database: Compendex

14. Accession number: 20142217764264
  Title: Development and experiment of a wireless wind speed sensor network measurement system for unmanned helicopter
   Authors: Hu, Lian1  ; Zhou, Zhiyan1  ; Luo, Xiwen1 ; Wang, Pei1 ; Yan, Yi'an1 ; Li, Jiyu1
   Author affiliation: 1  Key Laboratory of Key Technology for South Agricultural Machine and Equipment, Ministry of Education, South China Agricultural University, Guangzhou 510642, China
   Corresponding author: Zhou, Z. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 221-226
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The use of unmanned helicopters (UH) and other aviation aircraft for supplementary pollination in hybrid rice is one of the most important ways to solve the mechanization of the hybrid rice seed production. In order to conduct multi-point, multi-direction, mobile, and real-time measurement for wind field parameters on rice canopy which formed by UH's rotor airflow, a wireless wind speed sensor network system (WWSSN) was developed, and relevant reliability analysis and tests were also presented. The WWSSN consists of three modules, several wireless wind speed sensors (WWSS), the flight global position system (FGPS), and the intelligent control focus node (ICFN). The test results showed that the average relative error of wind speed measuring is not more than 3.52%, the absolute maximum error is 0.2 m/s, and no significant difference among each WWSS to reliably and accurately measure the wind velocity field corresponding values, the coefficient of variation is not greater than 4.41%. The fixing brackets can help to install the WWSS in paddy field, and the topological structure between ICFN and WWSSs is a star topology, it is easily to realize multi-point, multi-direction, mobile, and real-time measurement for wind field parameters on rice canopy which formed by UH's rotor airflow. In addition, the FGPS based on high-accuracy RTK GPS can also provide the pose information, which is helpful to the comprehensive analysis of the influencing factors in supplementary pollination using UH. It is indicated that the presented WWSSN can provide reliable and accurate wind field parameters measurement on rice canopy which formed by UH's rotor airflow. It can be used as an effective tool for the operation parameters optimization for supplementary pollination in hybrid rice breeding using UHs.
   Number of references: 21
   Main heading: Wind
   Controlled terms: Electric network topology  -  Helicopters  -  Machinery  -  Time measurement  -  Velocity  -  Wireless sensor networks
   Uncontrolled terms: Real time measurements  -  Supplementary pollination  -  Unmanned helicopter  -  Wind field  -  Wind speed
   Classification code: 943.3 Special Purpose Instruments  -  931.1 Mechanics  -  732 Control Devices  -  703.1 Electric Networks  -  652.4 Helicopters  -  601 Mechanical Design  -  443.1 Atmospheric Properties
   DOI: 10.6041/j.issn.1000-1298.2014.05.034
   Database: Compendex

15. Accession number: 20142217764280
  Title: Experiments on anisotropic mechanical properties of single crystal germanium
   Authors: Yang, Xiaojing1  ; Liu, Yanrong2 ; Yang, Xiaojiang2 ; Fang, Congcong2
   Author affiliation: 1  Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China
2  Faculty of Modern Agricultural Engineering, Kunming University of Science and Technology, Kunming 650500, China
   Corresponding author: Yang, X. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 322-326
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The anisotropic mechanical properties of crystal surface of single crystal germanium, (100), (110) and (111) were studied, through nano indentation experiments. According to the load-displacement curves of nano indentation processes and the theory of Oliver-Pharr, the elastic modulus and the hardness of the materials were investigated. The experimental results show that obvious plastic deformation occurred in single crystal germanium in the process of nano indentation and the plasticity of Ge(110) is the best, Ge(100) is worse than Ge(111), and the Ge(111) is the worst. And the hardness and the elastic modulus have similar change trend. When the indentation depth is shallow, significant fluctuations appeared on the hardness and the elastic modulus, affected by the surface effect. And because the atomic density of each crystal surface and the interplanar spacings are quite different, single-crystal germanium exhibits stable anisotropy, and the hardness and the elastic modulus rank from high to low as follows: (111) crystal plane, (110) crystal plane, (100) crystal plane. As the indentation depth increases, the hardness and the elastic modulus gradually stabilize, and the order from high to low are (110) crystal plane, (100) crystal plane, (111) crystal plane.
   Number of references: 17
   Main heading: Germanium
   Controlled terms: Anisotropy  -  Elastic moduli  -  Experiments  -  Hardness  -  Single crystals
   Uncontrolled terms: Anisotropic mechanical properties  -  Anistropy  -  Crystal planes  -  Crystal surfaces  -  Indentation depth  -  Interplanar spacings  -  Load-displacement curve  -  Single-crystal germanium
   Classification code: 421 Strength of Building Materials; Mechanical Properties  -  804 Chemical Products Generally  -  901.3 Engineering Research  -  931.2 Physical Properties of Gases, Liquids and Solids  -  933.1 Crystalline Solids  -  951 Materials Science
   DOI: 10.6041/j.issn.1000-1298.2014.05.050
   Database: Compendex

16. Accession number: 20142217764254
  Title: Effects of hydrolysates from acid-base process on the growth and ethanol fermentation of Fusarium oxysporum
   Authors: Fan, Jinxia1  ; Li, Wenzhe1 ; Zheng, Guoxiang1 ; Guan, Zhengjun1 ; Jiang, Cheng2
   Author affiliation: 1  College of Engineering, Northeast Agricultural University, Harbin 150030, China
2  School of Life Science and Technology, Harbin Institute of Technology, Harbin 150001, China
   Corresponding author: Fan, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 155-159
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The tolerance of Fusarium oxysporum on formic acid, acetic acid, furfural, vanillin and catechol, which are hydrolysis inhibitor, during ethanol fermentation process was investigated by shake flask method. The results showed that the order of sensitivity to various inhibitors for Fusarium oxysporum was formic acid, acetic acid, vanillin, catechol and furfural during ethanol fermentation. The production of ethanol was similar with that of the control when the acid concentration was 0.6 g/L at pH value 6.5 of acetic acid and pH value 7.5 of formic acid, respectively. Low concentrations of formic acid and acetic acid promoted cell growth, but high concentrations inhibited cell growth. And the inhibitory effect of vanillin, catechol and furfural on cell growth was stronger than that of the formic acid and acetic acid. The tolerance of Fusarium oxysporum for a single inhibitor was stronger than that for mixed inhibitor. The ethanol production was 78% of the control when the concentrations of formic acid, acetic acid, vanillin and catechol were 0.05 g/L, respectively.
   Number of references: 19
   Main heading: pH
   Controlled terms: Acetic acid  -  Aldehydes  -  Cell growth  -  Enzyme inhibition  -  Ethanol  -  Fermentation  -  Formic acid  -  Fungi  -  Furfural  -  Growth kinetics   -  Phenols
   Uncontrolled terms: Acid concentrations  -  Ethanol fermentation  -  Ethanol fermentation process  -  Fusarium oxysporums  -  Hydrolysates  -  Lignocelluloses  -  Low concentrations  -  Shake-flask method
   Classification code: 461 Bioengineering and Biology  -  801 Chemistry  -  804.1 Organic Compounds
   DOI: 10.6041/j.issn.1000-1298.2014.05.024
   Database: Compendex

17. Accession number: 20142217764242
  Title: Numerical simulation for two-phase flow of siphon outlet in pumping station
   Authors: Wang, Xiaosheng1, 2  ; Feng, Jian'gang2  ; Chen, Hongxun1 ; Bu, Lifeng2 ; Tan, Linlu2
   Author affiliation: 1  Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 200072, China
2  College of Water Conservancy and Hydropower, Hohai University, Nanjing 210098, China
   Corresponding author: Feng, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 78-83 29
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to understand the characteristic of the gas-liquid two-phase flow in siphon pipe, based on the homogeneous model in multiphase flow theory of ANSYS CFX software and RNG k-Ε turbulence model, the process of gas-liquid flow for a siphon outlet pipe in pumping station was simulated. Results of simulation showed that the air sacs are easily generated on the shell of siphon pipe when the gas mixed into the water and it has an extremely adverse influence with the siphon finish. Meanwhile, flow rate of the incoming flow is the main factor impacting the siphoning time. At last, the relations between the siphoning time and flow rate for hydraulic driving-gas and mixing gas-water processes, according with the power function relationship, were given.
   Number of references: 14
   Main heading: Siphons
   Controlled terms: Computer simulation  -  Flow rate  -  Gases  -  Liquids  -  Numerical models  -  Pumping plants  -  Turbulence models  -  Two phase flow
   Uncontrolled terms: Gas liquid flows  -  Gas-liquid two-phase flow  -  Homogeneous models  -  Incoming flows  -  Power functions  -  Pumping stations  -  Siphon pipes  -  Siphoning time
   Classification code: 446 Waterworks  -  631 Fluid Flow  -  631.1 Fluid Flow, General  -  723.5 Computer Applications  -  921 Mathematics  -  931.2 Physical Properties of Gases, Liquids and Solids
   DOI: 10.6041/j.issn.1000-1298.2014.05.012
   Database: Compendex

18. Accession number: 20142217764278
  Title: On-site measuring method for electrical runout on main shaft
   Authors: Mao, Jian1  ; Chen, Xiaolong2 ; Lin, Zaiyu2 ; Yang, Jiangxin2 ; Cao, Yanlong2 
   Author affiliation: 1  College of Mechanical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
2  College of Mechanical Engineering, Zhejiang University, Hangzhou 510641, China
   Corresponding author: Cao, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 310-314
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Electrical runout (ERO) reflects the heterogeneity of electromagnetic characteristics on surface of shaft. On-site measurement can inspect whether the ERO satisfies the processing and the machine operating requirements. It is very important for controlling the product quality and ensuring the working property. An on-site measurement technology of ERO on shaft based on eddy current was presented. Firstly, the working principle of eddy current sensor and the distribution of eddy were introduced. Then, a finite element analytical model for measuring ERO was developed. Finally, an on-site measurement system was set up to measure the ERO of air compressor main shaft. The results verify the validity of measurement system.
   Number of references: 15
   Main heading: Eddy current testing
   Controlled terms: Eddy currents  -  Finite element method  -  Measurements
   Uncontrolled terms: Eddy current sensors  -  Electromagnetic characteristic  -  Machine operating  -  Measurement system  -  On-site measurement  -  Run outs  -  Shaft parts  -  Working properties
   Classification code: 701.1 Electricity: Basic Concepts and Phenomena  -  921.6 Numerical Methods  -  941 Acoustical and Optical Measuring Instruments  -  942 Electric and Electronic Measuring Instruments  -  943 Mechanical and Miscellaneous Measuring Instruments  -  944 Moisture, Pressure and Temperature, and Radiation Measuring Instruments
   DOI: 10.6041/j.issn.1000-1298.2014.05.048
   Database: Compendex

19. Accession number: 20142217764256
  Title: Influence of organic ingredients mixing ratio on anaerobic fermentation
   Authors: Liu, Dan1  ; Li, Wenzhe1  ; Liu, Shuang1 ; Wang, Ming1 ; Cao, Lan1 ; Chang, Suqing1
   Author affiliation: 1  College of Engineering, Northeast Agricultural University, Harbin 150030, China
   Corresponding author: Li, W. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 166-172
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to determine the interaction rule of fat, starch and protein in the process of anaerobic fermentation, the influence of different mixing ratios on the characteristics of methanogenesis and degradation was investigated using mixture design under mesophilic condition. The results revealed that when fat, starch, and protein was used as substrate separately, the methanogenesis performances were inhibited in different degrees, and the mean biochemical methane potentials (BMP) were 345.36, 59.80 and 135.87 mL/g, respectively, which accordingly accounted for 34%, 14% and 26% of theoretical methane production. At the same time, the degradation property was affected apparently. However, the synergistic effects on methanogenesis and degradation were obvious while the three components were mixed as substrates. The regression models between the organic ingredients mixing ratios and BMP and volatile solid (VS) degradation rate were established, furthermore, the parameter optimization was carried out. The optimization result was that as the ratio of fat, starch and protein was 36:30:33, BMP and VS degradation rate were maximum. Experimental verification showed that BMP and VS degradation rate were 451.36 mL/g and 79.62% respectively at optimal ratio.
  Number of references: 27
  Main heading: Substrates
  Controlled terms: Anaerobic digestion  -  Degradation  -  Dynamics  -  Methane  -  Mixing  -  Mixtures  -  Proteins  -  Regression analysis  -  Starch
  Uncontrolled terms: Anaerobic fermentation  -  Biochemical methane potential  -  Experimental verification  -  Mesophilic condition  -  Mixture design  -  Organic ingredients  -  Parameter optimization  -  Synergistic effect
   Classification code: 931.1 Mechanics  -  922.2 Mathematical Statistics  -  804.1 Organic Compounds  -  802.3 Chemical Operations  -  802.2 Chemical Reactions  -  801 Chemistry  -  461 Bioengineering and Biology
   DOI: 10.6041/j.issn.1000-1298.2014.05.026
   Database: Compendex

20. Accession number: 20142217764244
  Title: Optimization design of high-efficiency non-overload on a low-specific speed centrifugal pump
   Authors: Zhang, Jinfeng1  ; Zhang, Yunlei1 ; Yuan, Shouqi1 ; Mao, Jieyun1
   Author affiliation: 1  Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013, China
   Corresponding author: Zhang, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 91-95 90
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: With the aim to meet the demand of a low-specific speed centrifugal pump for the high efficiency and non-overload characteristics at several specific operation points, a series of optimization were done on a model pump TS65-40-160. An impeller was designed based on the non-overload theory, and by analyzing the inner flow distribution in CFD and verify experiments, several improvements were taken to meet the complicated requirements. After several design improvements and experiments, an optimized scheme was obtained, whose head are slightly higher than the given indexes in the shut-off, designed and maximum flow rate points, and the maximum unit-efficiency is increased by nearly 14%, and the pump efficiency also meet the national standard requirement, and the shaft power has the non-overload trend, and the power value at 48 m3/h is within the motor power. Through many results comparisons from CFD and experiment, a conclusion is drawn that the simulation error is small and it can meet the requirement for model optimization.
   Number of references: 16
   Main heading: Efficiency
   Controlled terms: Centrifugal pumps  -  Computer simulation  -  Experiments
   Uncontrolled terms: Design improvements  -  Maximum flow rate  -  Model optimization  -  Multi-conditions  -  National standard  -  Non-overload  -  Non-overload characteristics  -  Optimization design
   Classification code: 618.2 Pumps  -  723.5 Computer Applications  -  901.3 Engineering Research  -  913.1 Production Engineering
   DOI: 10.6041/j.issn.1000-1298.2014.05.014
   Database: Compendex

21. Accession number: 20142217764258
  Title: Analytical models of multistage counter flow drying and tempering process of grain
   Authors: Li, Changyou1  ; Fang, Zhuangdong1
   Author affiliation: 1  Key Laboratory of Key Technology on Agricultural Machine and Equipment Ministry, South China Agricultural University, Guangzhou 510642, China
   Corresponding author: Li, C. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 179-184
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to analyze the moisture distribution of rough rice with high moisture content within counter flow drying layer and achieve the dynamic tracking of drying process and its control, based on the moisture diffusion model of drying process and the mass conservation equation of deep bed drying process, grain moisture variation in counter flow drying process was analyzed, and the moisture distribution in grain layer and the analytic expression of drying rate were deduced. Experiments indicate that 50°C hot air still has drying capacity after penetrating a 0.5-meter-thick refluxed zone when the ratio of air flux to grain mass is 4. The deviation of grain moisture from discharge hopper between mathematical explanations and experimental results was within ±0.5%, and it confirmed the reliability of the analytical model.
   Number of references: 17
   Main heading: Drying
   Controlled terms: Analytical models  -  Grain (agricultural product)  -  Moisture  -  Moisture determination  -  Moisture meters
   Uncontrolled terms: Analytic expressions  -  Counter current  -  High moisture contents  -  Mass conservation equations  -  Moisture diffusion  -  Moisture distribution  -  Paddy  -  Tempering process
   Classification code: 642.1 Process Heating  -  801.4 Physical Chemistry  -  821.4 Agricultural Products  -  921 Mathematics  -  944.1 Moisture Measuring Instruments  -  944.2 Moisture Measurements
   DOI: 10.6041/j.issn.1000-1298.2014.05.028
   Database: Compendex

22. Accession number: 20142217764271
  Title: Position-posture closed-loop control of six-legged walking robot based on inverse velocity kinematics
   Authors: Chen, Gang1  ; Jin, Bo1  ; Chen, Ying1
   Author affiliation: 1  State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
   Corresponding author: Jin, B. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 265-270 264
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Position-posture control system of six-legged walking robot has the characteristics: tight coupling, redundancy, nonlinearity. An inverse velocity kinematics model of six-legged walking robot was constructed through research on inverse velocity kinematics of single leg. Then the control on position and posture of six-legged walking robot was decoupled to two closed-loops control, the position and the posture closed-loop control, based on the inverse velocity kinematics. The proportional control strategy was employed to implement the closed-loop control on the position-posture of six-legged walking robot. Finally, a co-simulation on the closed-loop control on the position-posture of six-legged walking robot was carried out by using MATLAB and ADAMS, and the results verify that the method of closed-loop control on the position-posture of six-legged walking robot is correct.
   Number of references: 16
   Main heading: Position control
   Controlled terms: Electron emission  -  Kinematics  -  MATLAB  -  Mobile robots
   Uncontrolled terms: Closed loops  -  Closed-loop control  -  Cosimulation  -  Inverse velocity kinematics  -  Position-posture  -  Proportional control  -  Six-legged walking robots  -  Tight coupling
   Classification code: 731 Automatic Control Principles and Applications  -  921 Mathematics  -  931.1 Mechanics  -  931.3 Atomic and Molecular Physics
   DOI: 10.6041/j.issn.1000-1298.2014.05.041
   Database: Compendex

23. Accession number: 20142217764262
  Title: Temporal and spatial variation of vegetation coverage on upper Anning River based on RS
   Authors: Hu, Yufu1  ; Jiang, Shuanglong1 ; Liu, Yu1 ; Li, Xiang1 ; Wang, Yuting1 ; Chen, Bo1
   Author affiliation: 1  College of Resources and Environment, Sichuan Agricultural University, Chengdu 611130, China
   Corresponding author: Hu, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 205-215
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
  Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to reveal the temporal and spatial variation on vegetation coverage and provide evidence for ecological environment construction on the upper Anning River, the temporal and spatial variation on vegetation coverage, during 1999-2010, on the upper Anning River was extracted and analyzed based on two periods of remote sensing images (TM in 1999, ETM in 2010), which was based on RS and GIS technology. Meanwhile, combined with Aster DEM data, the vegetation distribution and its variation characteristics in different altitude and slope regions were also analyzed. The results showed that the vegetation coverage condition in study area overall was good. And the area of vegetation coverage (fc) above 0.5 was more than 60%. Besides, a trend emerged during 11 years in the study area that vegetation cover overall increased. The area of first grade vegetation coverage (fc≥0.7), second grade vegetation coverage (0.5≤fc<0.7) and third grade vegetation coverage (0.3≤fc<0.5) increased by 1.24%, 4.36% and 2.28%, respectively. However, the area of fourth grade vegetation coverage (0.1≤fc<0.3) and fifth grade vegetation coverage (fc<0.1) reduced by 25.72% and 12.28%, respectively. Low vegetation coverage was mainly distributed in relatively low altitude areas. With the increase of altitude, vegetation cover increased firstly and then decreased. Variation on vegetation coverage that low vegetation coverage was transformed into high vegetation cover degree was obvious in regions below 3000 m, especially lower than 2500 m. With influenced less by human activity, vegetation cover above 3000 m seemed to hold relatively little change. High vegetation cover was mainly located in high slope regions, while low vegetation cover was mainly located in relatively moderate slope regions. An obvious variation on vegetation coverage was concentrated in regions with slope range from 25° to 45°, regions below 25° ranked secondly. While no obvious change of vegetation cover in regions with slope above 45° appeared, with less influenced by human activity. Under hydrothermal condition, the vegetation coverage on aspect is sunny slope (135°~225°) > half-sunny slope (45°~135°) > half-shady slope (225°~315°) > shady slope (0°~45°, 315°~360°); the vegetation coverage increased in each aspect from 1999 to 2010, and sunny slope increased significantly while no obvious increase on shady slope.
   Number of references: 41
   Main heading: Vegetation
   Controlled terms: Geographic information systems  -  Image reconstruction  -  Rivers
   Uncontrolled terms: Ecological environment constructions  -  Hydrothermal conditions  -  Remote sensing images  -  RS  -  Temporal and spatial variation  -  Variation characteristics  -  Vegetation coverage  -  Vegetation distribution
   Classification code: 407.2 Waterways  -  723.3 Database Systems  -  741 Light, Optics and Optical Devices  -  821 Agricultural Equipment and Methods; Vegetation and Pest Control
   DOI: 10.6041/j.issn.1000-1298.2014.05.032
   Database: Compendex

24. Accession number: 20142217764263
  Title: Forest volume estimation model using spectra and topographic factors of ZY-3 image
   Authors: Wang, Jia1  ; Song, Shanyun1 ; Liu, Xia1 ; Yang, Huiqiao1 ; Feng, Zhongke1
   Author affiliation: 1  Beijing Key Laboratory of Precision Forestry, Beijing Forestry University, Beijing 100083, China
   Corresponding author: Wang, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 216-220
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Taking Wang Ye Dian Forestry Farm as the study area, forest volumes of sample plots were obtained as the true value through field investigation. At the same time, the images of satellite ZiYuan 3 (ZY-3) were processed, and corresponding band spectra value, combination value of spectra and topographic information of the sample volumes were obtained. Through multiple regression analysis, broad-leaved forest and coniferous forest volume estimation models were established. The experimental results show that the correlation coefficient of broad-leaved forest volume estimation model was 0.815, and that of coniferous forest was 0.761. There was a strong correlation between the spectra value, combination of spectra, topographic factors of ZY-3 and the forest volume. The model prediction accuracy was verified, and accuracies of broad-leaved forest and coniferous forest models were 85.3% and 91.9%, respectively. The study suggests that the use of ZY-3 images for the forest volume estimation has good application prospect.
   Number of references: 15
   Main heading: Forestry
   Controlled terms: Regression analysis
   Uncontrolled terms: Application prospect  -  Band spectrum  -  Correlation coefficient  -  Estimation models  -  Forest volumes  -  Multiple regression analysis  -  Topographic factors  -  Topographic information
   Classification code: 821.0 Woodlands and Forestry  -  922.2 Mathematical Statistics
   DOI: 10.6041/j.issn.1000-1298.2014.05.033
   Database: Compendex

25. Accession number: 20142217764257
  Title: Effects of blade number on self-starting performance of vertical axis wind turbine with self-adapting wind speed under low wind speed
   Authors: Qu, Jianjun1  ; Xu, Mingwei1 ; Mei, Yi1 ; Li, Yan2
   Author affiliation: 1  Department of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China
2  Department of Engineering, Northeast Agricultural University, Harbin 150030, China
   Corresponding author: Qu, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 173-178
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: With the aim to investigate the influences of blade number on the self-starting performance of vertical axis wind turbine with self-adapting wind speed (VAWT-SWS), a prototype which could change the number of blades (2, 3, 4) was designed. Through the wind tunnel experiment the static torque coefficient curve with azimuth angle at a wind speed of 3 m/s was obtained, and compared experiments were done on Darrieus straight-bladed wind turbine with the same parameters. Then the load of VAWT-SWS was released, and rotation speed curve of VAWT-SWS changing with time at 3 m/s was gotten. The experimental results showed that the self-starting performance of VAWT-SWS was superior to that of Darrieus straight-bladed wind turbine; the increase of blade number could improve the static self-starting performance of VAWT-SWS, but degraded the dynamic self-starting performance.
   Number of references: 16
   Main heading: Wind turbines
   Controlled terms: Experiments  -  Torque  -  Well pumps  -  Wind  -  Wind tunnels
   Uncontrolled terms: Azimuth angles  -  Low wind speed  -  Rotation speed  -  Self-starting  -  Straight-bladed  -  Vertical axis wind turbines  -  Wind speed  -  Wind tunnel experiment
   Classification code: 421 Strength of Building Materials; Mechanical Properties  -  443.1 Atmospheric Properties  -  446.1 Water Supply Systems  -  615.8 Wind Power (Before 1993, use code 611 )  -  651.2 Wind Tunnels  -  901.3 Engineering Research
   DOI: 10.6041/j.issn.1000-1298.2014.05.027
   Database: Compendex

26. Accession number: 20142217764276
  Title: Experimental investigation on the flow characteristics of a novel super high pressure pneumatic fueling valve
   Authors: Liu, Yang1  ; Yao, Xiaoxian1 ; Song, Xiaodong1  ; Li, Kun2
   Author affiliation: 1  School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China
2  Beijing Electro-Mechanical Engineering Institute, Aerodynamic Technology Academy of China Aerospace Science and Industry Corporation, Beijing 100074, China
   Corresponding author: Song, X. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 299-304
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The flow characteristics of super-high pressure pneumatic fueling valve, a critical component of the fueling system, were detailed investigated by experimental way. The problems of large driving power need, slow response and high pressure gas leakage of super-high pressure pneumatic fueling valve, were solved by using pneumatic lever rule and self-acting sealing structure. A two-stage valve that used a pilot solenoid valve, moderate pressure and low flux, to control a high pressure and large flow-rate poppet valve is developed. A test apparatus with the affiliated measurement system for testing the flow characteristics of the pneumatic fueling valve orifice were introduced. A simplified model of the flow channel of fueling valve for different valve lift was obtained. Experimental study on the flow characteristics of the pneumatic fueling valve with different orifice throttling area was carried out under the condition that the pressure is higher than 10 MPa. The results show that the back pressure growth rate of tank and the lift of valve rod have great influences on the flow characteristic of valve orifice. When valve lift is relative taller, the gas channel could be simplified as two-stage orifices in series, the flow characteristics are in accordance with that of ideal converging nozzle, and the critical pressure ratio is 0.5. When valve lift is relatively lower, the gas channel can be simplified as three-stage orifices in series, shows different flow characteristics, and the critical pressure ratio is 0.3. Increasing the valve lift and the injecting pressure is the most effective solution to enhance both the transient mass flow-rate and the discharge coefficient.
   Number of references: 18
   Main heading: Fueling
   Controlled terms: Experiments  -  Orifices  -  Pneumatics  -  Pressure
   Uncontrolled terms: Critical component  -  Critical pressure ratio  -  Different valve lift  -  Discharge coefficients  -  Experimental investigations  -  Flow charac-teristics  -  Moderate pressures  -  Transient flow
   Classification code: 931.1 Mechanics  -  901.3 Engineering Research  -  632.3 Pneumatics  -  619.1 Pipe, Piping and Pipelines  -  524 Solid Fuels  -  523 Liquid Fuels  -  522 Gas Fuels
   DOI: 10.6041/j.issn.1000-1298.2014.05.046
   Database: Compendex

27.  Accession number: 20142217764247
  Title: Soil-water characteristic curves of soil with plant additive and analyses of the fitting models
   Authors: Zheng, Jian1, 2  ; Wang, Yan1 ; Cai, Huanjie2 ; Wan, Jixiang1 ; Li, Zhijun2
   Author affiliation: 1  Western China Energy and Environment Research Center, Lanzhou University of Technology, Lanzhou 730050, China
2  Key Laboratory of Agricultural Soil and Water Engineering in Arid and Semiarid Areas, Ministry of Education, Northwest A and F University, Yangling, Shaanxi 712100, China
   Corresponding author: Zheng, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 107-112
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: With the aim to explore the influence of plant additive on soil water-holding capacity, the soil-water characteristic curves under different soil bulk density, different plant additives and different additive proportions were measured, and the influences of plant additive on the soil water-holding capacity under the conditions mentioned above were analyzed. Then, the soil-water characteristic curves were fitted by using the models of RETC software, and the parameters of the models and the model suitability were determined. The results show that under the same soil water suction, the soil water contents of the treatments with plant additive are higher than that of pure soil; the treatment with 3% maize leaf plant additive has better water conservation capability than the treatment with 3% maize-cob, but the treatments with 1% plant additive have little difference. In the low suction stage, the mixing plant additive reduces the proportion of large pores in the soil; while at the higher suction stage, the plant additive increases the small pores proportion of soil, thereby improves the soil water-holding capacity. The analysis results of model suitability with models of RETC software show that the optimal model of unsaturated hydraulic conductivity is fitting Mualem model. The optimal models of the treatments with 1.35 g/cm3 and 1.40 g/cm3 soil bulk density are VGM(m, 1/n) and VGM(m, n), respectively, with 1% and 3% maize leaf additive, while those are BCM and GM(m, 1/n), respectively, with 1% and 3% maize-cob additive.
   Number of references: 26
   Main heading: Additives
   Controlled terms: Curve fitting  -  Soil moisture  -  Water conservation
   Uncontrolled terms: Fitting model  -  Model suitability  -  Plant additives  -  Soil pores  -  Soil water content  -  Soil-water characteristic curve  -  Unsaturated hydraulic conductivity  -  Water holding capacity
   Classification code: 444 Water Resources  -  483.1 Soils and Soil Mechanics  -  803 Chemical Agents and Basic Industrial Chemicals  -  804 Chemical Products Generally  -  921.6 Numerical Methods
   DOI: 10.6041/j.issn.1000-1298.2014.05.017
   Database: Compendex

28.  Accession number: 20142217764236
  Title: Computational investigation in active and passive regeneration characteristics of catalytic particulate filter
   Authors: Li, Zhijun1  ; Yang, Shichao1 ; Jiao, Penghao1 ; Yang, Yang1 ; Hou, Puhui1 ; Shen, Boxi1
   Author affiliation: 1  State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China
   Corresponding author: Li, Z. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 37-43
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: A CPF numerical model was proposed with experimental verification. The paper introduced PM (particulate matter) catalytic regeneration percentage (α) as a criterion of CPF catalytic efficiency, investigated the influences of inlet conditions on catalytic efficiency, and selected the catalyst loading based on certain catalytic efficiency range. In addition, the effects of three kinds of channel shape, wall permeability and soot permeability on the pressure drop of CPF, the frequency of active regeneration and the maximum regeneration temperature were investigated. The results show that during certain temperature range, the increases in initial soot quantity and NO/NO2 volume proportion enhance the catalytic efficiency; the active regeneration frequency drops under the condition of hexagon channel, high wall permeability and high soot permeability; the maximum active regeneration temperature is low under the condition of square channel, high wall permeability and low soot permeability.
   Number of references: 16
   Main heading: Catalyst regeneration
   Controlled terms: Efficiency  -  Loading  -  Soot
   Uncontrolled terms: Active regenerations  -  Catalytic efficiencies  -  Catalytic particular filter  -  Catalytic regenerations  -  Computational investigation  -  Experimental verification  -  Physical parameters  -  Regeneration temperature
   Classification code: 521 Fuel Combustion and Flame Research  -  672 Naval Vessels  -  803 Chemical Agents and Basic Industrial Chemicals  -  804 Chemical Products Generally  -  913.1 Production Engineering
   DOI: 10.6041/j.issn.1000-1298.2014.05.006
   Database: Compendex

29. Accession number: 20142217764268
  Title: Method for observing stem water storage dynamics based on a sap flow rate sensor
   Authors: Yun, Yuliang1, 2  ; Sheng, Wenyi1 ; Sun, Yurui1 
   Author affiliation: 1  College of Information and Electrical Engineering, China Agricultural University, Beijing 100083, China
2  College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao 266109, China
   Corresponding author: Sun, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 247-252
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Stem water storage varies with a daily cycle. However, none of sensor techniques can meet the noninvasive measurement of herbaceous plant stem water storage. A method of using a sap flow rate sensor to observe stem water storage dynamics for herbaceous plants was proposed. The preliminary experiment was conducted with a potted sunflower. The sunflower stem internal water recharging/discharging and its switching-time could be obtained by the outputs of a sap flow sensor and an electronic scale. The observation of sunflower stem diameter variations further validated the effectiveness of the method. At the same time, the micro-meteorological factors could be collected and the results showed that the micro-meteorological factors had a great impact on stem water storage dynamic changes. Compared with other methods, the measurement system is simple, easy to operate and non-destructive. Even though only sunflower samples were investigated, the method can be also applied to other herbaceous plants.
   Number of references: 21
   Main heading: Plants (botany)
   Controlled terms: Electronic scales  -  Flow rate  -  Sensors
   Uncontrolled terms: Herbaceous plants  -  Measurement system  -  Noninvasive measurements  -  Observe  -  Sap flow rate  -  Sap flow sensors  -  Sensor techniques  -  Water storage
   Classification code: 461.9 Biology  -  631 Fluid Flow  -  715 Electronic Equipment, General Purpose and Industrial  -  801 Chemistry
   DOI: 10.6041/j.issn.1000-1298.2014.05.038
   Database: Compendex

30.  Accession number: 20142217764253
  Title: Application of bioaugmentation in anaerobic digestion
   Authors: Wu, Shubiao1  ; Li, Ying2, 3 ; Dong, Renjie1  ; Yuan, Zhenhong3 ; Sun, Yongming3 ; Kong, Xiaoying3
   Author affiliation: 1  College of Engineering, China Agricultural University, Beijing 100083, China
2  College of Agronomy and Biotechnology, China Agricultural University, Beijing 100193, China
3  Laboratory of Biomass Bio-Chemical Conversion, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
   Corresponding author: Dong, R. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 145-154
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The application of bioaugmentation techniques in anaerobic fermentation was reviewed in term of mechanisms, effects and influencing factors of the bioaugmentation process. It reveals that bioaugmentation has positive effects on anaerobic fermentation, such as in feedstock pretreatment, anaerobic digestion processes start up and biogas produce. However, most of the existing researches were conducted in laboratory scale and batch assays. The focal point of bioaugmentation process is the survival and activity of functional microorganisms in the fermentation system. There are still a series of problems that need to be solved to increase the success of bioaugmentation strategies widely using in actual engineering, such as revealing the interrelationship of the inoculated microbial culture and existing microflora, developing stable and adaptable functional microbial agents, seeking better ways of bioaugmentation performance, establishing evaluation criteria of the bioaugmentation effects.
   Number of references: 79
   Main heading: Anaerobic digestion
   Controlled terms: Biogas
   Uncontrolled terms: Anaerobic digestion process  -  Anaerobic fermentation  -  Bio-augmentation  -  Evaluation criteria  -  Feedstock pretreatment  -  Fermentation systems  -  Microbial culture  -  Pre-Treatment
   Classification code: 452.4 Industrial Wastes Treatment and Disposal  -  522 Gas Fuels
   DOI: 10.6041/j.issn.1000-1298.2014.05.023
   Database: Compendex

31. Accession number: 20142217764283
  Title: Bionic topology optimization method for continuum structures based on bone remodeling mechanism
   Authors: Rahman, Kaysar1, 2  ; Geni, Mamtimin1 
   Author affiliation: 1  School of Mechanical Engineering, Xinjiang University, Urumqi 830047, China
2  College of Mathematics and System Science, Xinjiang University, Urumqi 830046, China
   Corresponding author: Geni, M. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 340-346
   Language: Chinese
  ISSN: 10001298
  CODEN: NUYCA3
  Document type: Journal article (JA)
  Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract: Bone remodeling is the process of ongoing replacement of old bone by new. The remodeling process is achieved by bone-resorbing osteoclasts and bone-forming osteoblasts. In terrestrial vertebrates, activities of these two types of cells are strictly balanced and adapt the shape of bone to mechanical stress. A simple bone remodeling model by coupling the bone formation and resorption based on Turing reaction-diffusion system weighed by local mechanical stress was proposed. This model was coupled with finite element method by using the element adding and removing process, and a new bionic topology optimization model was established. The major idea of this approach is to consider the continuum structure to be optimized as a piece of bone, and the process of finding the optimum topology of a structure was equivalent to the bone remodeling process. Uniform distribution of strain-energy density as a guideline updated the material distribution, until equilibrium was reached and then the optimal topology structure was obtained. The effectiveness of the present method is demonstrated by some numerical examples.
  Number of references: 32
  Main heading: Bone
   Controlled terms: Bionics  -  Finite element method  -  Linear equations  -  Mathematical models  -  Stresses  -  Structural optimization  -  Topology
   Uncontrolled terms: Bone remodeling  -  Continuum structures  -  Material distribution  -  Reaction diffusion equations  -  Reaction diffusion systems  -  Strain energy density  -  Topology Optimization Method  -  Uniform distribution
   Classification code: 421 Strength of Building Materials; Mechanical Properties  -  461.1 Biomedical Engineering  -  461.2 Biological Materials and Tissue Engineering  -  921 Mathematics
   DOI: 10.6041/j.issn.1000-1298.2014.05.053
   Database: Compendex

32. Accession number: 20142217764240
  Title: Effect of the maximum density ratio between liquid and vapor on cavitating simulation of axial-flow pump
   Authors: Shi, Weidong1  ; Zhang, Guangjian1 ; Zhang, Desheng1 ; Xu, Yandong1
   Author affiliation: 1  Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013, China
   Corresponding author: Shi, W. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 65-70
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The filter-based model (FBM), which was introduced into CFX by user defined subroutine, and a homogeneous cavitation model was used to calculate cavitating flow of the axial-flow pump at different conditions. The effect of a maximum density ratio between liquid and vapor in the cavitation model on cavitation characteristic simulation was investigated. The results compared with experimental data show that the FBM based on RNG k-Ε model can predict the external characteristic of axial-flow pump well. The critical NPSHs predicted by the true density ratio 43197 at three different conditions (Q=320, 392, 480 m3/h) are closer to experimental values than the default 1000 and the relative errors are 1.93%, 4.73% and 8.09% respectively. With the increasing of maximum density ratio, the calculated vapor area, vapor volume fraction and the range of tip leakage vortex increase as well. This may be the cause of different predicted critical NPSHs.
   Number of references: 19
   Main heading: Vapors
   Controlled terms: Cavitation  -  Computer simulation  -  Leakage (fluid)  -  Liquids  -  Pumps
   Uncontrolled terms: Axial flow pump  -  Cavitation characteristics  -  Experimental values  -  External characteristic  -  Filter-based model  -  Maximum density  -  Tip leakage vortex  -  Vapor volume fraction
   Classification code: 452.3 Industrial Wastes  -  618.2 Pumps  -  631.1.1 Liquid Dynamics  -  723.5 Computer Applications  -  804 Chemical Products Generally  -  931.2 Physical Properties of Gases, Liquids and Solids
   DOI: 10.6041/j.issn.1000-1298.2014.05.010
   Database: Compendex

33. Accession number: 20142217764275
  Title: Research on fluid-structure coupling vibration of valve core-stem system in a single-type control valve
   Authors: Wang, Wen1  ; Fu, Weiping1 ; Kong, Xiangjian1 ; Ma, Yushan2 ; Xu, Li1, 3
   Author affiliation: 1  Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China
2  Wuzhong Instrument Co., Ltd., Wuzhong 751100, China
3  Petrochina Guangdong Petrochemical Company, Jieyang 515200, China
   Corresponding author: Wang, W. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 291-298
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Aiming at the fluid-structure interaction vibration of the valve core-stem system in a single-type control valve, a dynamic simulation model of this system was built with consideration of a valve positioner. The predictor-corrector method was given for solving response of the valve core-stem system. The vibration response of the systems was analyzed by ANSYS software under the conditions of fixed and varying opening as well as flow-opening and flow-closing. The research results show that, for fixed opening, the valve core steady displacement offset and the fluid imbalance force increase with the increase of the pressure difference and the decrease of the opening; the transient time of the valve core dynamic displacement is shortened with the increase of the pressure difference, and the valve core dynamic displacement response amplitude under flow-opening is greater than that under flow-closing. For reducing the opening, the transient time of the valve core dynamic displacement is shorter than that under flow-closing, and the greater the pressure difference, the shorter the time, while under flow-opening it is opposite; for increasing the opening, the relation between the transient time and the pressure difference is contrary to that under reducing the opening.
   Number of references: 18
   Main heading: Safety valves
   Controlled terms: Computer simulation  -  Fluid structure interaction  -  High pressure effects
   Uncontrolled terms: Control valves  -  Fluid-structure coupling  -  Predictor-corrector methods  -  Pressure differences  -  Research results  -  Valve positioners  -  Vibration  -  Vibration response
   Classification code: 723.5 Computer Applications  -  914.1 Accidents and Accident Prevention  -  931.1 Mechanics  -  931.2 Physical Properties of Gases, Liquids and Solids
   DOI: 10.6041/j.issn.1000-1298.2014.05.045
   Database: Compendex

34. Accession number: 20142217764270
  Title: Simulated experiment on shrubs moisture sensor probe structure based on TDT principle
   Authors: Wang, Hailan1  ; Zhang, Xin1 ; Sheng, Wenyi2 ; Zhao, Yandong1 
   Author affiliation: 1  School of Technology, Beijing Forestry University, Beijing 100083, China
2  College of Information and Electrical Engineering, China Agricultural University, Beijing 100083, China
   Corresponding author: Zhao, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 259-264
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Based on time domain transmissometry (TDT), measurement device for shrub stem water content was designed. This device consists of high frequency signal source, coaxial transmission lines, winding probe and phase comparison circuit. Propagation velocity of high frequency electromagnetic wave varies in different medium, and the propagation phase also changes. The dielectric constant of wet shrubs mainly depends on its moisture content. By measuring phase difference between the coaxial cable A and the winding stem probe B, the moisture content in shrubs was obtained. Absorbent cotton stick was choice to simulate shrubs with different moisture content. And the influence of the phase difference from frequency of high frequency signal source and the structure of the probe was studied. Experimental results show that under the conditions of 60 cm probe length, 50 MHz and 100 MHz signal source frequency, the phase difference between the coaxial cable A and the winding stem probe B is monotonic with the change of water content, and there exists a good correlation between phase difference and moisture content.
   Number of references: 18
   Main heading: Probes
   Controlled terms: Cables  -  Coaxial cables  -  Dielectric materials  -  Electromagnetic waves  -  Moisture determination  -  Moisture meters  -  Winding
   Uncontrolled terms: Measuring  -  Moisture sensors  -  Probe structures  -  Shrub  -  TDT
   Classification code: 944 Moisture, Pressure and Temperature, and Radiation Measuring Instruments  -  943 Mechanical and Miscellaneous Measuring Instruments  -  942 Electric and Electronic Measuring Instruments  -  941 Acoustical and Optical Measuring Instruments  -  816.1 Processing of Plastics and Other Polymers  -  711 Electromagnetic Waves  -  708.1 Dielectric Materials  -  706.2 Electric Power Lines and Equipment  -  535 Rolling, Forging and Forming
   DOI: 10.6041/j.issn.1000-1298.2014.05.040
   Database: Compendex

35.  Accession number: 20142217764241
  Title: Hydraulic performance analysis of flow passage components in S-shaped shaft extension tubular pumping system under multi-conditions
   Authors: Yang, Fan1  ; Liu, Chao1 ; Tang, Fangping1 ; Zhou, Jiren2 ; Jin, Yan2
   Author affiliation: 1  School of Hydraulic, Energy and Power Engineering, Yangzhou University, Yangzhou 225127, China
2  Hydrodynamic Engineering Laboratory of Jiangsu Province, Yangzhou University, Yangzhou 225009, China
   Corresponding author: Yang, F. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 71-77
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to further study the hydraulic performance of flow passage components for S-shaped shaft extension tubular pumping system, the whole flow passage of pumping system were simulated based on the CFD technology under multiple operating conditions. The inner flow pattern and hydraulic performance of flow passage components were analyzed. Focusing on details of flow field, the flow characteristics in the impeller and guide vane were analyzed under three different operating conditions (the small flow rate condition KQ=0.368, the best efficiency condition KQ=0.490 and the large flow rate condition KQ=0.613). The static pressure of pressure surface near shroud is larger, and the static pressure of suction surface near hub is larger than that near shroud. With the increase of spanwise location value, the differential pressure between pressure surface and suction surface increases gradually. The static pressure of guide vane surface increases from inlet section to outlet section at KQ=0.490. With the decrease of flow, the recycling circulation ratio CH decreases firstly then increases, and the minimum ratio CH was 0.031 at KQ=0.490. The accuracy and effectiveness of numerical results were verified by the physical model test. The test results show that when the flow coefficient KQ=0.443 and the head coefficient KH=0.828, the highest efficiency of pumping system is 83.55% at the blade angle -2°.
   Number of references: 18
   Main heading: Pumping plants
   Controlled terms: Computational fluid dynamics  -  Computer simulation  -  Impellers
   Uncontrolled terms: Different operating conditions  -  Differential pressures  -  Flow charac-teristics  -  Guide vane  -  Hydraulic performance  -  Passage  -  Performance  -  Tubular pumps
   Classification code: 446 Waterworks  -  601.2 Machine Components  -  723.5 Computer Applications
   DOI: 10.6041/j.issn.1000-1298.2014.05.011
   Database: Compendex

36. Accession number: 20142217764266
  Title: Three-dimensional localization method of agriculture wireless sensor networks based on crossover particle swarm optimization
   Authors: Wang, Jun1  ; Li, Shuqiang1 ; Liu, Gang2
   Author affiliation: 1  College of Agriculture Engineering, Henan University of Science and Technology, Luoyang 471003, China
2  Key Laboratory for Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University, Beijing 100083, China
   Corresponding author: Wang, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 233-238 215
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: For the standard particle swarm optimization algorithm is easy to appear slow convergence speed, emerge premature convergence and fall into local minimum point in the later evolution, a kind of localization algorithm based on cross particle swarm optimization for wireless sensor networks was presented to solve these problems. The approach mainly included three stages: sink node selection, measure distances amendment and unknown sensor node localization. By referring to the crossover operation of genetic algorithm idea, cross particle swarm optimization algorithm could increase the diversity of particles and reduce the distance measure error and the influence of anchor node number on localization result. The simulation experiment result showed that the stability and localization accuracy of the method proposed are better than those of the standard particle swarm optimization algorithm. Under the condition of same measure error and the equal number of anchor nodes, the new method was compared with the shuffled frog leaping algorithm. And the compared results are as follows: the maximum of localization errors are 1.3378 m and 1.7473 m, respectively; the minimum of localization errors are 0.2583 m and 0.5615 m, respectively; the average localization errors are 0.6512 m and 1.0447 m, respectively. Results indicate that the method proposed is suitable for agriculture wireless sensor network localization.
   Number of references: 28
   Main heading: Sensor nodes
   Controlled terms: Agriculture  -  Algorithms  -  Errors  -  Genetic algorithms  -  Particle swarm optimization (PSO)  -  Wireless sensor networks
   Uncontrolled terms: Localization  -  Localization algorithm  -  Measure distance  -  Particle swarm  -  Particle swarm optimization algorithm  -  Pre-mature convergences  -  Shuffled frog leaping algorithm (SFLA)  -  Three-dimensional localizations
   Classification code: 722 Computer Systems and Equipment  -  723 Computer Software, Data Handling and Applications  -  731 Automatic Control Principles and Applications  -  732 Control Devices  -  821 Agricultural Equipment and Methods; Vegetation and Pest Control  -  921 Mathematics
   DOI: 10.6041/j.issn.1000-1298.2014.05.036
   Database: Compendex

37. Accession number: 20142217764235
  Title: Multi-section optimization shift control method of dry dual clutch transmission
   Authors: Yan, Yiquan1  ; Song, Jian1  ; Li, Liang1
   Author affiliation: 1  State Key Laboratory of Automotive Safety and Energy, Tsinghua University, Beijing 100084, China
   Corresponding author: Song, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 30-36
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Clutch friction work and vehicle jerk were synthesized to evaluate the shift process performance of dry dual clutch transmission (DCT). The entire shift process was analyzed and divided into 4 sections by the key points which were found based on the synthesized criterion. A control algorithm including proper control methods in every respective section was designed to achieve optimization of the entire process. Especially, the micro-slip control method was applied in the torque swap section and the discrete dynamic programming method was applied in the speed regulation section. At last, the algorithm was applied in the experimental vehicle and the experiment result showed the effectiveness in improving shift performance of DCT. Compared with the traditional control algorithm, the results prove that the new algorithm can decrease vehicle jerk during the entire shift process without producing more clutch friction work.
   Number of references: 15
   Main heading: Clutches
   Controlled terms: Algorithms  -  Dynamic programming  -  Vehicle performance
   Uncontrolled terms: Clutch friction  -  Discrete dynamics  -  Dry dual clutch transmissions  -  Experimental vehicle  -  Multi-section  -  Process performance  -  Shift strategy  -  Speed regulation
   Classification code: 602.2 Mechanical Transmissions  -  663.1 Heavy Duty Motor Vehicles  -  723 Computer Software, Data Handling and Applications  -  921 Mathematics  -  921.5 Optimization Techniques
   DOI: 10.6041/j.issn.1000-1298.2014.05.005
   Database: Compendex

38. Accession number: 20142217764233
  Title: Fractional modeling and characteristic analysis of hydro-pneumatic suspension for construction vehicles
   Authors: Jin, Chun1  ; Sun, Huilai1 ; Zhang, Wenming1 ; Li, Hao1 ; Tian, Haiyong2
   Author affiliation: 1  School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
2  China CNRCo., Ltd., Beijing 100078, China
   Corresponding author: Jin, C. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 16-21
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Motion differential equation of hydro-pneumatic suspension is established to describe the vibration characteristics for a certain type of construction vehicles. The output force was deduced from the suspension parameters. Based on the suspension characteristics of multi-phase medium, fractional calculus theory was introduced, and its fractional Bagley-Torvik equation was set up. The numerical computation by low-pass filter of Oustaloup algorithm was performed. The numerical solution of nonlinear fractional equation was obtained to investigate the vibration characteristics of the suspension fractional system. By the build of equal-ratio test platform and simulation model, the fractional, integer-order model simulation and experimental data were compared. When the fractional-order is 0.9, it better describes the motion characteristics of suspension system. The experiments show that the experimental data can fit the fractional-order system model well, thereby prove the model on hydro-pneumatic suspension system.
   Number of references: 17
   Main heading: Automobile suspensions
   Controlled terms: Computer simulation  -  Differential equations  -  Mathematical models  -  Nonlinear equations  -  Pneumatic control  -  Suspensions (components)  -  Vibration analysis
   Uncontrolled terms: Bagley-Torvik equation  -  Characteristic analysis  -  Construction vehicle  -  Fractional order  -  Fractional-order systems  -  Hydro-pneumatic suspension  -  Motion differential equation  -  Vibration characteristics
   Classification code: 601.2 Machine Components  -  632.1 Hydraulics  -  723.5 Computer Applications  -  731.1 Control Systems  -  921 Mathematics  -  943.2 Mechanical Variables Measurements
   DOI: 10.6041/j.issn.1000-1298.2014.05.003
   Database: Compendex

39.  Accession number: 20142217764245
  Title: Optimization design of double-volute splitter in ES250-370 double-suction pump
   Authors: Liu, Jianrui1  ; Fu, Dengpeng1 ; He, Xiaoke1
   Author affiliation: 1  Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013, China
   Corresponding author: Liu, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 96-100 106
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Because of unreasonable design of double-volute splitter in ES250-370 double-suction pump, its shaft was bent which lead to wear and tear of the seal. According to the basic principle of double-volute pump design, three different double-volute splitter schemes were put forward; the reason of radical force and the problem of original double-volute were analyzed. Based on the RNG k-Ε turbulent model provided by CFX software and Simple algorithm, double-volute splitters from three different improved schemes were simulated. Static pressure distribution of different volutes were obtained, the axial stress and radical force of the pump were calculated as well. Steady numerical simulation and experimental results show that, compared to the original splitter, the rated point efficiency of No.3 splitter is increased by 7%, and radical force is balanced effectively and the axis stress is the minimum, while keeping the hydraulic performance. So No.3 is the best design of the three options. Splitter starts from the fourth cross section of double-suction pump and ends with eighth cross section, and it meets the logarithmic curve equipment. A method of designing the splitter for double-volute centrifugal pumps was provided for the pump designer.
   Number of references: 15
   Main heading: Pumps
   Controlled terms: Computer simulation  -  Design  -  Hydraulic machinery
   Uncontrolled terms: Double-suction pump  -  Double-volute pumps  -  Hydraulic performance  -  Logarithmic curve  -  Optimization design  -  Radical forces  -  Splitter  -  Static pressure distributions
   Classification code: 408 Structural Design  -  618.2 Pumps  -  632.2 Hydraulic Equipment and Machinery  -  723.5 Computer Applications
   DOI: 10.6041/j.issn.1000-1298.2014.05.015
   Database: Compendex

40. Accession number: 20142217764234
  Title: Visualization experiment of internal flow of nozzle and spray construction for various fuels
   Authors: Jiang, Guangjun1  ; Zhang, Yusheng1 ; Elkelawy, Medhat2 ; Xiao, Gan1
   Author affiliation: 1  College of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
2  Faculty of Engineering, Tanta University, Tanta 31111, Egypt
   Corresponding author: Jiang, G. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 22-29
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: A visualization experimental apparatus with high speed controlled flash photography techniques was developed to investigate the flow in the hole of diesel injection nozzles and the spray construction near orifice. The experiments were performed with the transparent actual nozzles for diesel, gasoline, ethanol diesel fuel and biodiesel. The results indicate that the cavitation films could be observed in the hole for all fuels. The initial cavitation was appeared earlier and the cavitation intensity was stronger for the fuel which had lower viscosity and higher saturated vapor pressure. There was larger spray cone angle with stronger cavitation intensity. After the jet was finished, the gas backflow phenomenon could be observed in the hole and the initial bubble would be produced. And the initial bubble size could increase with the reduction of fuel surface tension. The flow status in the pressure chamber and hole was greatly affected by the movement of needle.
   Number of references: 18
   Main heading: Spray nozzles
   Controlled terms: Cavitation  -  Color photography  -  Diesel fuels  -  Fuels
   Uncontrolled terms: Cavitation intensity  -  Experimental apparatus  -  Flash photography  -  Flow  -  Injector nozzle  -  Lower viscosities  -  Saturated vapor pressure  -  Visualization experiment
   Classification code: 522 Gas Fuels  -  523 Liquid Fuels  -  524 Solid Fuels  -  631.1 Fluid Flow, General  -  631.1.1 Liquid Dynamics  -  742.1 Photography
   DOI: 10.6041/j.issn.1000-1298.2014.05.004
   Database: Compendex

41. Accession number: 20142217764267
  Title: Forecasting model for ph value of aquaculture water quality based on PCA-MCAFA-LSSVM
   Authors: Liu, Shuangyin1, 2  ; Xu, Longqin1 ; Li, Zhenbo2, 3 ; Li, Daoliang3, 4 
   Author affiliation: 1  College of Information, Guangdong Ocean University, Zhanjiang 524025, China
2  Key Laboratory of Agricultural Information Acquisition Technology, Ministry of Agriculture, China Agricultural University, Beijing 100083, China
3  Beijing ERC for Internet of Things in Agriculture, China Agricultural University, Beijing 100083, China
4  Beijing ERC for Advanced Sensor Technology in Agriculture, China Agricultural University, Beijing 100083, China
   Corresponding author: Li, D. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 239-246
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to solve the problem of low prediction accuracy and bad robustness of the traditional forecasting methods in water quality, this paper put forward the prediction model for pH value of aquaculture water quality based on the principal component analysis (PCA) and least squares support vector machine (LSSVM), which the hyper-parameters is optimized by modified cultural artificial fish-swarm algorithm (MCAFA). The dimension of aquiculture ecologic environmental data was reduced by principal component analysis; double evolutionary mechanism of cultural algorithm for reference was applied and LSSVM was taken as an artificial fish; belief space was used to guide the shoal evolution step size, global search direction and Cauchy mutation to improve the diversity of the artificial fish swarm; so the optimal hyper-parameters nonlinear pH value prediction model was automatically obtained. Based on the prediction model, the water quality on-line monitoring was predicted for a high-density aquaculture pond from September 1, 2011 to September 4, 2011 in Yixing city, Jiangsu province. Experimental results show that the PCA-MCAFA-LSSVM prediction model has good prediction effect than the ant colony algorithm-LSSVM and genetic algorithm-LSSVM. The absolute error of the 93.05% test samples is less than 8%, and the max absolute error is only 11.61%; the root-mean-square error, average absolute relative error and the running time are 0.0474, 0.0041 and 4.367 s respectively, which are better than those from the other models. It is obvious that PCA-MCAFA-LSSVM prediction model has low computational complexity and high forecast accuracy. It can provide the decision basis for the water quality controlling in the high density eriocheir sinensis culture.
   Number of references: 24
   Main heading: Forecasting
   Controlled terms: Algorithms  -  Aquaculture  -  Genetic algorithms  -  Mathematical models  -  Parameter estimation  -  pH  -  Principal component analysis  -  Water quality
   Uncontrolled terms: Artificial fish-swarm algorithm  -  Evolutionary mechanisms  -  Least squares support vector machines  -  Least squares support vector regression  -  Low computational complexity  -  Parameter optimization  -  pH value  -  Root-mean square errors
   Classification code: 453.2 Water Pollution Control  -  731.1 Control Systems  -  801.1 Chemistry, General  -  821.3 Agricultural Methods  -  921 Mathematics  -  922.2 Mathematical Statistics
   DOI: 10.6041/j.issn.1000-1298.2014.05.037
   Database: Compendex

42. Accession number: 20142217764238
  Title: Numerical simulation on hydraulic performance of axial-flow pumping system with adjustable inlet guide vanes
   Authors: Yang, Fan1  ; Liu, Chao1 ; Tang, Fangping1 ; Zhou, Jiren2 ; Cheng, Li2
   Author affiliation: 1  School of Hydraulic, Energy and Power Engineering, Yangzhou University, Yangzhou 225127, China
2  Hydrodynamic Engineering Laboratory of Jiangsu Province, Yangzhou University, Yangzhou 225009, China
   Corresponding author: Yang, F. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 51-58
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The theoretical analysis and numerical simulation method were used to study the influence of inlet guide vane on the hydraulic performance of axial-flow pumping system. The inlet guide vane was designed based on design requirements. The three-dimensional internal flow of axial-flow pumping system was simulated in different installation angles of inlet guide vane. Overall performance curves of axial-flow pumping system with adjusted inlet guide vane were obtained and the multiple non-liner regression prediction mathematical models of the hydraulic performance were established based on the results of numerical simulation and velocity triangle analysis. Compared with the pumping system without inlet guide vane, the hydraulic performance of pumping system with inlet guide vane changes little in the high efficiency area and small flow rate condition, but the efficiency of pumping system drops greatly because the hydraulic loss of inlet guide vane increases greatly in the large flow rate condition. With the increase of positive installation angle of inlet guide vane, the high efficiency operating condition is offset to small flow rate and the whole efficiency curves of pumping system would drop. While, with the decrease of negative installation angle, the high efficiency of pumping system increases firstly then decreases. The flow rate doesn't change in the high efficiency operating condition of different negative installation angles.
   Number of references: 17
   Main heading: Wakes
   Controlled terms: Computer simulation  -  Drops  -  Efficiency  -  Flow rate  -  Numerical models  -  Pumping plants
   Uncontrolled terms: Axial flow pump  -  Hydraulic performance  -  Inlet guide vane  -  Installation angle  -  Numerical simulation method  -  Operating condition  -  Performance curve  -  Regression predictions
   Classification code: 921 Mathematics  -  913.1 Production Engineering  -  723.5 Computer Applications  -  631.1 Fluid Flow, General  -  631 Fluid Flow  -  446 Waterworks  -  443.1 Atmospheric Properties
   DOI: 10.6041/j.issn.1000-1298.2014.05.008
   Database: Compendex

43. Accession number: 20142217764269
  Title: Physical description of plant leaf wilting
   Authors: Miao, Teng1  ; Guo, Xinyu2 ; Wen, Weiliang2 ; Lu, Shenglian2 
   Author affiliation: 1  College of Information and Electrical Engineering, Shenyang Agricultural University, Shenyang 110866, China
2  Key Laboratory for Information Technology in Agriculture, Ministry of Agriculture, Beijing Research Center for Information Technology in Agriculture, Beijing 100097, China
   Corresponding author: Lu, S. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 253-258
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: This paper presented a physical representation for quantitatively simulating the motion of plant leaves, such as wilting and curling. The wilting motion is associated with the contraction and stretching of the plant cells. Fact-based, our method modeled the physical morphological changes of the plant cells for describing the wilting motion of leaves. Firstly, a voxel mesh constructed based on 3D leaf model was used to simulate the cell structure of plant leaves. Then, the mass-spring structure was applied to express the forces between cells .Finally, The Euler-Lagrange equation was utilized to model the movement process and solved by implicit newmark integration method to get the 3D positions of the voxel mesh. The movement trails of wilted leaf tip in the geometric space were used for data validation. The angular difference between measured motion direction and experimental results was 19°, and the distance between them ranged from 0.68 cm to 3.0 cm. The experimental data show that movement trails of wilted leaf tip that the method simulated is closed to the real wilted leaf; secondly, evaluating this method from the visual aspects, the algorithm also can realistically simulate the deformation process of plant leaf wilting.
   Number of references: 21
   Main heading: Plants (botany)
   Controlled terms: Computer simulation  -  Models  -  Plant cell culture
   Uncontrolled terms: Deformation process  -  Euler-Lagrange equations  -  Morphological changes  -  Motion direction  -  Newmark integration methods  -  Physical model  -  Plant leaf  -  Wilting
   Classification code: 461.8 Biotechnology  -  461.9 Biology  -  723.5 Computer Applications  -  902.1 Engineering Graphics
   DOI: 10.6041/j.issn.1000-1298.2014.05.039
   Database: Compendex

44.  Accession number: 20142217764265
  Title: Prototype system of shape measurements of animal based on 3D reconstruction
   Authors: Guo, Hao1  ; Ma, Qin1 ; Zhang, Shengli2 ; Su, Wei1 ; Zhu, Dehai1  ; Gao, Yunbing1
   Author affiliation: 1  Key Laboratory of Agricultural Information Acquisition Technology, Ministry of Agriculture, China Agricultural University, Beijing 100083, China
2  College Animal Science and Technology, China Agricultural University, Beijing 100083, China
   Corresponding author: Zhu, D. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 227-232 246
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to improve the accuracy, efficiency and automatic degree of existing acquisition techniques of animal's conformation, based on two depth cameras, a real time system which can reconstruct the animal for body measurement, an automatic ball-target-based method for the extrinsic calibration of reconstruction system which is based on RANSAC were put forward. The extrinsic parameters can be used for registering point clouds acquired synchronously from depth camera in real time. And then, interactive measuring method which is optimized in picking mode for body measurement was used to get shape traits of animal. Xtion PRO was chosen as data acquisition equipment, and taking the pig specimen as an example, point clouds data acquired from high precision laser scanner was applied to evaluation of the system. The results show that the ball-target-based method can get the extrinsic parameters of depth camera automatically; the average error of registered data is less than 7.50 mm; the speed of reconstructing the whole pig can reach in excess of 15 f/s; body measurement error is less than 4%. So the system can be applied to body measurements in agricultural field.
   Number of references: 17
   Main heading: Measurements
   Controlled terms: Animals  -  Calibration  -  Cameras  -  Interactive computer systems  -  Real time systems
   Uncontrolled terms: 3D reconstruction  -  Agricultural fields  -  Body measurements  -  Data acquisition equipment  -  Depth camera  -  Extrinsic calibration  -  Point cloud  -  Reconstruction systems
   Classification code: 944 Moisture, Pressure and Temperature, and Radiation Measuring Instruments  -  943 Mechanical and Miscellaneous Measuring Instruments  -  942 Electric and Electronic Measuring Instruments  -  941 Acoustical and Optical Measuring Instruments  -  822 Food Technology  -  821 Agricultural Equipment and Methods; Vegetation and Pest Control  -  814 Leather and Tanning  -  742.2 Photographic Equipment  -  722.4 Digital Computers and Systems  -  471 Marine Science and Oceanography  -  461 Bioengineering and Biology
   DOI: 10.6041/j.issn.1000-1298.2014.05.035
   Database: Compendex

45. Accession number: 20142217764252
  Title: Influence of biogas slurry application on ammonia volatilization and nitrogen infiltration
   Authors: Wang, Zhongjiang1  ; Cai, Kangni1 ; Wang, Lili1 ; Wang, Guangyuan1 ; Li, Wenzhe1
   Author affiliation: 1  College of Engineering, Northeast Agricultural University, Harbin 150030, China
   Corresponding author: Wang, Z. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 139-144
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to investigate the law of ammonia volatilization and nitrogen infiltration in the process of biogas slurry application, the influence rules of different application rate and depth of biogas slurry on the ammonia volatilization of the soil surface and the infiltration of total nitrogen, ammonia nitrogen and nitrate nitrogen in vertical soil profile were explored systematically by soil column experiments at room temperature. The experimental results showed that the total ammonia volatilization of the soil surface and the duration of volatilization were all positively correlated with biogas slurry application rate. The moisture content, total nitrogen and ammonia nitrogen in vertical soil profile were mainly distributed in topsoil. But the nitrate nitrogen had migrated to deep layer soil with the water infiltration of biogas slurry. The total ammonia volatilization of the soil surface decreased with the increase of biogas slurry application depth when the biogas slurry was used as basic fertilizer. The ammonia volatilization rate of biogas slurry could be effectively reduced when the biogas slurry application depth was ten centimeters. And the peaks of total nitrogen, ammonia nitrogen and nitrate nitrogen in vertical soil profile were all positively correlated with biogas slurry application depth.
   Number of references: 16
   Main heading: Biogas
   Controlled terms: Ammonia  -  Infiltration  -  Nitrates  -  Nitrogen  -  Nitrogen fertilizers  -  Soils
   Uncontrolled terms: Ammonia nitrogen  -  Ammonia volatilization  -  Application rates  -  Deep layer soils  -  Nitrate nitrogen  -  Room temperature  -  Soil-column experiment  -  Water infiltration
   Classification code: 483.1 Soils and Soil Mechanics  -  522 Gas Fuels  -  804 Chemical Products Generally  -  804.2 Inorganic Compounds
   DOI: 10.6041/j.issn.1000-1298.2014.05.022
   Database: Compendex

46. Accession number: 20142217764281
  Title: Study on 2D electro-hydraulic proportional directional valve elastic pressure torsion coupling
   Authors: Zuo, Qiang1  ; Li, Sheng1 ; Ruan, Jian1  ; Ren, Yan1
   Author affiliation: 1  Key Laboratory of Special Purpose Equipment and Advanced Processing Technology, Ministry of Education, Zhejiang University of Technology, Hangzhou 310014, China
   Corresponding author: Ruan, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 327-333
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Since conventional direct-acting electro-hydraulic proportional directional valve has the limitation of small flow, and two-stage electro-hydraulic proportional directional valve has the limitation of complex structure, a large flow and simple structure 2D electro-hydraulic proportional directional valve with position feedback was proposed. The valve coaxially consists of 2D directional valve, elastic pressure torsion coupling and the proportional electromagnet. The elastic pressure torsion coupling changes the linear movement of proportional electromagnet armature into the rotation of the spool movement, at the same time, amplifying the thrust of proportional electromagnet. Based on the operational principle of the elastic pressure torsion coupling, the mathematical model was established and the analytic equations of axial force, torque, rotation angle and deflection were deduced. Then the finite element simulation of static characteristics was performed on the platform of ANSYS Workbench 13. The analytic solutions and the simulated results are in a close agreement with the experimental results. The results indicate that with 55 N input of the proportional electromagnet, through the elastic pressure torsion coupling switching, the valve has 1.2 N?m torque output, and the linearity of the force input and the torque output is good; the spool displacement and the input displacement of elastic pressure torsion coupling are very consistent. The application of elastic pressure torsion coupling to the 2D electro-hydraulic proportional direction valve is feasible.
   Number of references: 15
   Main heading: Torsional stress
   Controlled terms: Electromagnets  -  Mathematical models
   Uncontrolled terms: Analytic equations  -  Electro-hydraulics  -  Finite element simulations  -  Operational principles  -  Proportional direction valves  -  Proportional electromagnets  -  Static characteristic  -  Torsion coupling
   Classification code: 421 Strength of Building Materials; Mechanical Properties  -  704.1 Electric Components  -  921 Mathematics
   DOI: 10.6041/j.issn.1000-1298.2014.05.051
   Database: Compendex

47. Accession number: 20142217764260
  Title: Comparison of transmission and reflection imaging technologies to detect potato defects based on machine vision technology
   Authors: Li, Xiaoyu1  ; Tao, Hailong1 ; Gao, Hailong1 ; Li, Peng1 ; Huang, Tao1 ; Sun, Jinfeng2
   Author affiliation: 1  College of Engineering, Huazhong Agricultural University, Wuhan 430070, China
2  College of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
   Corresponding author: Li, X. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 191-196
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: With the aim to solve the accurate rate short of reflection imaging technology to simultaneously detecting internal and external defects of potatoes, a nondestructive test technology based on transmission imaging and machine vision technology was proposed. It is concluded that the combination of hill climbing method and region growing method is the optimal image segmentation method for transmission and reflection images of potato by studying image preprocessing methods. Partial least squares-support vector machine (PLS-SVM) method was employed to establish the potato defects recognition model for transmission and reflection images of potato. In the potato internal defects detection, the classifying correct rates of the transmission and the reflection imaging technology are 96.30% and 59.26% respectively; in the potato external defects detection, the classifying correct rates are 94.20% and 89.86% respectively; in the simultaneous potato internal and external defects detection, the classifying correct rates are 95.83% and 81.25% respectively. The research results show that the transmission method is better than the reflection method in detecting potato internal and external defects alone, or in detecting the internal and external defects simultaneously.
   Number of references: 19
   Main heading: Defects
   Controlled terms: Computer vision  -  Imaging techniques  -  Least squares approximations  -  Nondestructive examination  -  Support vector machines  -  Testing
   Uncontrolled terms: Defect detection  -  Hill-climbing methods  -  Least squares support vector machines  -  Machine vision technologies  -  Potato  -  Region growing methods  -  Segmentation methods  -  Transmission images
   Classification code: 921.6 Numerical Methods  -  746 Imaging Techniques  -  741.2 Vision  -  741 Light, Optics and Optical Devices  -  951 Materials Science  -  723.5 Computer Applications  -  423.2 Non Mechanical Properties of Building Materials: Test Methods  -  423 Non Mechanical Properties and Tests of Building Materials  -  421 Strength of Building Materials; Mechanical Properties  -  723 Computer Software, Data Handling and Applications
   DOI: 10.6041/j.issn.1000-1298.2014.05.030
   Database: Compendex

48.  Accession number: 20142217764261
  Title: Detection of apples' internal quality using CT imaging technology and Fourier transform
   Authors: Zhang, Jingping1  ; Zhu, Jianxi1 ; Sun, Teng1
   Author affiliation: 1  School of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou 310058, China
   Corresponding author: Zhang, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
  Publication year: 2014
  Pages: 197-204
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The apple CT gray scale images scanned by CT were transformed by Fourier transform, and 16 parameters were extracted from each frequency domain after transformation. Combined with the soluble solid, the titrable acidity, the pH value and the moisture content of apple, the principal components regression (PCR) and the partial least squares regression (PLSR) were employed to establish the prediction models of apples' internal quality. In the PCR, the first ten principal components were chosen with contribution rate reaching 99%. The models show good prediction results by the F-criterion with all the P values lower than 0.05. In the PLSR, each content model has the lowest sum of squared errors when the number of latent variables is 12, which indicated a good prediction result. The results show that the models built by PCR have higher predictive ability than that of PLS method in the matter of errors.
   Number of references: 19
   Main heading: Fruits
   Controlled terms: Fourier transforms  -  Least squares approximations
   Uncontrolled terms: Apple  -  CT technology  -  PCR  -  PLSR  -  Quality detection
   Classification code: 821.4 Agricultural Products  -  921.3 Mathematical Transformations  -  921.6 Numerical Methods
   DOI: 10.6041/j.issn.1000-1298.2014.05.031
   Database: Compendex

49. Accession number: 20142217764255
  Title: Design of hot water heater with heat pipe for biogas system
   Authors: Xia, Jiqing1  ; Wang, Ningning1 ; Wang, Xiaodong1 ; Liu, Huanyu1 ; Shi, Cancan1 ; Wang, Zhongjiang1
   Author affiliation: 1  School of Engineering, Northeast Agricultural University, Harbin 150030, China
   Corresponding author: Xia, J. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 160-165
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Fermentation temperature is instable in the northern winter which is the bottleneck of biogas system. In order to solve this problem, a heating equipment which was a hot water heater with heat pipe with gas heating used for biogas system was developed. The distance of the heating side with heat pipe from gas stove hole, flow rate of the burning gas and average water temperature were chosen as experimental parameters. The conditions of this processing technology were optimized by the index of thermal efficiency of hot heater. The result showed that the thermal efficiency of the hot water heater reached the maximum value of 63.47% when the distance of the heating side with heat pipe from gas stove hole was 21.5 cm, the flow rate of the liquefied petroleum gas was 1.01 kg/h and the average water temperature was 35~45°C.
   Number of references: 16
   Main heading: Heat pipes
   Controlled terms: Biogas  -  Flow rate  -  Gas stoves  -  Hot water heating  -  Liquefied petroleum gas  -  Temperature
   Uncontrolled terms: Biogas systems  -  Burning gas  -  Experimental parameters  -  Fermentation temperature  -  Processing technologies  -  Thermal efficiency  -  Water temperatures
   Classification code: 522 Gas Fuels  -  523 Liquid Fuels  -  631 Fluid Flow  -  641.1 Thermodynamics  -  641.2 Heat Transfer  -  643.1 Space Heating
   DOI: 10.6041/j.issn.1000-1298.2014.05.025
   Database: Compendex

50.  Accession number: 20142217764249
  Title: Response of soil moisture of microtopography on precipitation characteristics in the loess region of Northern Shaanxi
   Authors: Zhao, Weijun1  ; Ma, Huan1 ; Zhu, Qingke1  ; Zhang, Yan1 ; Liu, Leilei1 ; Wang, Yu1
   Author affiliation: 1  Key Laboratory of Soil and Water Conservation and Desertification Combat, Ministry of Education, Beijing Forestry University, Beijing 100083, China
   Corresponding author: Zhu, Q. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 118-124
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Standard precipitation index (SPI) was used to analyze the annual and growing season precipitation conditions from 1957 to 2012 based on the precipitation data of meteorological station in Wuqi County. The correlation analysis was used between the SPI and the soil water layer thickness of the microtopographies during 2008-2012. The results showed that the precipitation fluctuation was larger from 1957 to 1986 than that from 1987 to 2012. The extreme and severe drought years appeared in 1957-1986, but those did not appear during 1987-2012; there was positive correlation between the SPI of growing season and the change value of soil water layer thickness of microtopographies. The SPI of growing season had the lower correlation degree (R2<0.8) with the gentle slope and sink hole of steep slope, but the R2 lay between 0.8 and 0.9 with gully, platform and ephemeral gully. The SPI of growing season had the larger correlation degree (R2>0.9) with scarp, sunny uniform slope and half sunny uniform slope; and the difference among the change value of soil water layer thickness in the all monitoring points was significant in the growing season, and the mean soil water layer thickness of gentle slope, sink hole and platform was larger than those of other monitoring points.
   Number of references: 36
   Main heading: Soil moisture
   Controlled terms: Landforms  -  Precipitation (chemical)  -  Precipitation (meteorology)  -  Sediments  -  Stream flow
   Uncontrolled terms: Correlation analysis  -  Meteorological station  -  Micro topography  -  Northern shaanxi  -  Positive correlations  -  Precipitation characteristics  -  Precipitation data  -  Standard precipitation indices
   Classification code: 443.3 Precipitation  -  481.1 Geology  -  483 Soil Mechanics and Foundations  -  483.1 Soils and Soil Mechanics  -  631.1 Fluid Flow, General  -  802.3 Chemical Operations
   DOI: 10.6041/j.issn.1000-1298.2014.05.019
   Database: Compendex

51. Accession number: 20142217764250
  Title: Change characteristics and influencing factors of soil shear strength during maize growing period
   Authors: Zheng, Zicheng1  ; Zhang, Xizhou1 ; Li, Tingxuan1 ; Jin, Wei1 ; Lin, Chaowen2
   Author affiliation: 1  College of Resources and Environment, Sichuan Agricultural University, Chengdu 611130, China
2  Soil and Fertilizer Institute, Sichuan Academy of Agricultural Science, Chengdu 610006, China
   Corresponding author: Zheng, Z. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 125-130 172
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: In order to explore the change characteristics of soil shear strength, change characteristics and influence factors of soil shear strength were studied during maize growing period based on the method of field investigation and laboratory. The result showed that in the 0~5 cm soil layer, soil shear strength increased gradually with the maize growth period and reached the maximum in mature period. However, soil shear strength increased first and then decreased with the maize growth period in the 5~10 cm and 10~15 cm soil layers, and soil shear strength reached the maximum in tasseling period. Soil shear strength showed the higher values in the different maize growing periods. The reinforcing effects of the shear strength in the first three soil layers were the better, and the reinforcing rates were the highest in tasseling period of maize. There existed linear function between soil shear strength and the soil moisture, and there were significant positive linear correlations between soil shear strength and soil bulk density, root amount, root length, root volume. At the same time, there were significant positive correlations between the reinforcing values of the shear strength and increasing value of 0~1 mm root length. Soil shear strength enhanced gradually with the maize growth period, and soil water content, bulk density and maize root had a great influence on soil shear strength. So, it had significant importance for soil erosion control to select the maize variety with 0~1 mm root, and applied soil and water conservation measures to increase soil water content and bulk density.
   Number of references: 26
   Main heading: Shear strength
   Controlled terms: Reinforcement  -  Soil conservation  -  Soil moisture  -  Water conservation
   Uncontrolled terms: Influence factors  -  Maize  -  Maize growth periods  -  Positive correlations  -  Purple soils  -  Soil and water conservation measures  -  Soil erosion controls  -  Soil shear strength
   Classification code: 415 Metals, Plastics, Wood and Other Structural Materials  -  421 Strength of Building Materials; Mechanical Properties  -  422 Strength of Building Materials; Test Equipment and Methods  -  444 Water Resources  -  483.1 Soils and Soil Mechanics  -  951 Materials Science
   DOI: 10.6041/j.issn.1000-1298.2014.05.020
   Database: Compendex

52.  Accession number: 20142217764277
  Title: Study on flow ripple of balanced two-ring axial piston pump
   Authors: Deng, Haishun1  ; Wang, Chuanli1  ; Zhang, Lixiang1
   Author affiliation: 1  Department of Mechanical Engineering, Auhui University of Science and Technology, Huainan 232001, China
   Corresponding author: Wang, C. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 305-309
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: The balanced two-ring axial piston pump has a different characteristic of flow ripple because of its improved structure. The flow rippleis analyzed when the numbers of the piston inside and outside are even or odd. And its instantaneous flow's curves are drawn by Matlab, based on the different parameters. The results show that when the numbers of the piston inside and outside are unequal even or unequal odd, the instantaneous flow inside and outside will counteract, and the flow ripple will reduce. When the numbers of the piston inside and outside are equal even or equal odd, the instantaneous flow inside and outside will overlap, and the flow ripple will remain unchanged. When the numbers of the piston inside and outside are equal and the piston inside and outside are arranged in cross, the pump has the minimum flow ripple, the ripple period is half of that of ordinary axial piston pump, and the pump's structure is more compact.
   Number of references: 16
   Main heading: Reciprocating pumps
   Controlled terms: Pistons
   Uncontrolled terms: Axial piston pump  -  Balanced  -  Flow ripple  -  Improved structures  -  Instantaneous flow  -  Minimum flow  -  On flow
   Classification code: 612.1.1 Internal Combustion Engine Components  -  618.2 Pumps
   DOI: 10.6041/j.issn.1000-1298.2014.05.047
   Database: Compendex

53.  Accession number: 20142217764248
  Title: Effects of the leaching times and flue gas desulfurization gypsum on ammonium nitrogen transport in solonetz
   Authors: He, Xin1  ; Su, Yanping1  ; Yang, Peiling1 ; Ren, Shumei1 ; Yu, Haoliang1
   Author affiliation: 1  College of Water Resources and Civil Engineering, China Agricultural University, Beijing 100083, China
   Corresponding author: Su, Y. ([email protected])
   Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
   Abbreviated source title: Nongye Jixie Xuebao
   Volume: 45
   Issue: 5
   Issue date: May 2014
   Publication year: 2014
   Pages: 113-117
   Language: Chinese
   ISSN: 10001298
   CODEN: NUYCA3
   Document type: Journal article (JA)
   Publisher: Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
   Abstract: Based on the soil column breakthrough experiment in laboratory, four treatments (desulfurization gypsum with none or one or three leaching times; no desulfurization gypsun with none leaching time) were set up. With the analysis of relationship among these three ions: NH4 , Ca2 , Na and the hydraulic conductivity (HC), the effects of the leaching times and flue gas desulfurization gypsum on ammonium nitrogen transport in solonetz were investigated. The results showed that the suppression of the adsorption of ammonium was occurred in the solonetz combined with desulfurization gypsum without leaching. But with the leaching times increasing before penetration, the slope of the breakthrough curve reduced and the adsorption enhanced. In the view of controlling water and salt, promoting the adsorption of fertilizer, inhibition of soil secondary salinization, it was inappropriate to put the ammonium fertilizer together with desulfurization gypsum in solonetz at the same time. It suggested that the solonetz mixed with desulfurization gypsum should be leached two times, which are autumn irrigation and spring irrigation, with the leaching amount of 662.7 m3/hm2. On the basis of ensuring the reclamation effect, this leaching way can decrease the amount of autumn irrigation and distribute the limited freshwater resources reasonably in the area.
   Number of references: 22
   Main heading: Leaching
   Controlled terms: Adsorption  -  Desulfurization  -  Fertilizers  -  Flue gases  -  Gypsum  -  Irrigation  -  Nitrogen
   Uncontrolled terms: Ammonium nitrogen  -  Break through curve  -  Breakthrough experiment  -  Desulfurization gypsums  -  Flue gas desulfurization gypsums  -  Fresh water resources  -  Soil secondary salinizations  -  Water and salts
   Classification code: 821.3 Agricultural Methods  -  813 Coatings and Finishes  -  804 Chemical Products Generally  -  802.3 Chemical Operations  -  521 Fuel Combustion and Flame Research  -  414 Masonry Materials  -  412 Concrete
   DOI: 10.6041/j.issn.1000-1298.2014.05.018
   Database: Compendex