ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

2012年第43卷第12期共收錄50篇
1. Accession number:20130315915061
  Title:Stress and strain analysis in sliding contact with two fractal surfaces
  Authors:Lai, Lianfeng1 ; Gao, Chenghui1 ; Huang, Jianmeng1 
  Author affiliation:1  School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China
  Corresponding author:Gao, C. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:278-282
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A 2-D sliding model of micro-scale was established between two rough surfaces exhibiting fractal behavior, and the stress and strain was discussed by using the finite element analysis. A pair of asperities was analyzed take into account elastic- plastic material properties with material failure. The transient stress/strain distribution of the rough solid was presented. The numerical results showed that the equivalent plastic strain versus different depth which at different locations showed different laws. Failure began beneath the surface at the region of highest plastic strain. A shear stress zone exited at a certain depth from the contact surface in the rear of the contact asperity. This shear stress zone on the one hand prevented the crack from extending along the depth direction, on the other hand, prompted the crack along an extension of the parallel to the direction of the friction surface crack growth and leads to final fracture.
  Number of references:23
  Main heading:Surfaces
  Controlled terms:Cracks  -  Elastoplasticity  -  Finite element method  -  Fractals  -  Plastic deformation  -  Shear stress  -  Surface defects
  Uncontrolled terms:Contact surface  -  Equivalent plastic strain  -  Fractal behaviors  -  Fractal surfaces  -  Friction surfaces  -  Material failures  -  Micro-scales  -  Numerical results  -  Plastic materials  -  Rough surfaces   -  Sliding contacts  -  Sliding model  -  Stress and strain  -  Stress and strain analysis  -  Transient stress
  Classification code:421 Strength of Building Materials; Mechanical Properties  -  921 Mathematics  -  921.6 Numerical Methods  -  931 Classical Physics; Quantum Theory; Relativity  -  951 Materials Science
  DOI:10.6041/j.issn.1000-1298.2012.12.050
  Database:Compendex

2. Accession number:20130315915052
  Title:Intelligent measurement and control system of facility agriculture based on ZigBee and 3G
  Authors:Sheng, Ping1 ; Guo, Yangyang1 ; Li, Pingping2 
  Author affiliation:1  School of Computer Science and Telecommunication Engineering, Jiangsu University, Zhenjiang 212013, China
                  2  Nanjing Forestry University, Nanjing 210037, China
  Corresponding author:Sheng, P. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:229-233
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Aimed at meeting the requirements of facility agriculture precision control, a kind of high efficient remote precise measurement and control system of facility agricultural based on ZigBee and 3G is proposed. Through the ZigBee wireless sensor network, the system realize the collection of local environmental information and upload the data to the embedded server. The system connect internet through 3G network, which could construct a big range and low cost wireless network. B/S (Browser/Server) structure was used in the system, which could realize remote real-time monitoring environmental data information and video information. The embedded expert system model make this system automatic and intelligent. The experimental results showed that the performance of the system was quite stable and the system satisfied the design requirements in real-time data acquisition wirelessly, environmental automatic control and environmental visualization control remotely. And this system has a very well real-time nature and expansibility. The system has a good application prospect in automatic and intelligent facility agriculture.
  Number of references:14
  Main heading:Zigbee
  Controlled terms:Agriculture  -  Automation  -  Control systems  -  Expert systems
  Uncontrolled terms:3G  -  3G Networks  -  Application prospect  -  Browser/server  -  Design requirements  -  Embedded expert system  -  Environmental data  -  Environmental information  -  Environmental visualization  -  Facility agricultures   -  Intelligent measurement  -  Low costs  -  Precise measurements  -  Precision control  -  Real time monitoring  -  Real-time data acquisition  -  Remote measurement  -  Video information
  Classification code:722.3 Data Communication, Equipment and Techniques  -  723.4.1 Expert Systems  -  731 Automatic Control Principles and Applications  -  731.1 Control Systems  -  732 Control Devices  -  821 Agricultural Equipment and Methods; Vegetation and Pest Control
  DOI:10.6041/j.issn.1000-1298.2012.12.041
  Database:Compendex

3. Accession number:20130315915059
  Title:Milling forces model of spiral taper gear using form milling
  Authors:Jia, Xinjie1 ; Deng, Xiaozhong2 ; Su, Jianxin2 
  Author affiliation:1  School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China
                   2  School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang 471003, China
  Corresponding author:Deng, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:268-272
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Based on the geometrical theory of the form milling the spiral taper gear, the computational formula of the cutting thickness and cutting width in every time was deduced. The milling force model for form milling the spiral taper gear was presented. The milling force factors were calibrated via single factor experimentations and the form milling force simulation programs were prepared. Experimental installations were designed to validate the availability of the milling force model. Comparison between the computational results and experimental observations confirmed the validity deviation of the proposed model was within ±15%.
  Number of references:12
  Main heading:Milling (machining)
  Controlled terms:Gear cutting
  Uncontrolled terms:Computational formula  -  Computational results  -  Cutting width  -  Experimental installations  -  Experimental observation  -  Geometrical theory  -  Milling force  -  Milling force models  -  Simulation program
  Classification code:604.1 Metal Cutting  -  604.2 Machining Operations
  DOI:10.6041/j.issn.1000-1298.2012.12.048
  Database:Compendex

4. Accession number:20130315915036
  Title:Quality recognition of Xihu longjing tea based on intelligent olfactory
  Authors:Shi, Bolin1 ; Zhao, Lei1 ; Zhi, Ruicong1 ; Xi, Xingjun1 ; Zhu, Dazhou2 
  Author affiliation:1  Food and Agriculture Standardization Institute, China National Institute of Standardization, Beijing 100088, China
                 2  National Research Center of Intelligent Equipment for Agriculture, Beijing 100097, China
  Corresponding author:Zhao, L. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:130-135
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The intelligent olfactory spectrograms of Xihu Longjing tea were collected by electronic nose. The spectrograms scores matrix that obtained by principal component analysis was applied. The influence of the information from grading, tree varieties and producing areas on quality of tea was analyzed. The soft independent modeling of class analogy was used to establish three kinds of models for grading, tree varieties and producing areas, respectively. Results showed that the intelligent olfactory spectrograms from different grading tea had the most difference than the other two elements. The grading discrimination model had well performance with about 100% correct rate to predict top grade teas. Meanwhile, the influences of tree varieties and location on the tea quality were seemed to be similar. Under the same grade and same producing area, the tree varieties discrimination model of tea was built. Also, the producing area discrimination model of tea was built. The correct rates of the two models were all over 92%. On the basis of above study, the quick detection strategy of Xihu Longjing tea by intelligent olfactory technology was presented, that is, grading demarcation, tree varieties identification and producing area distinguishing under the same grading were carried out in turn.
  Number of references:18
  Main heading:Grading
  Controlled terms:Forestry  -  Principal component analysis  -  Spectrographs
  Uncontrolled terms:Characteristics recognition  -  Discrimination model  -  Electronic NOSE  -  Intelligent olfactory  -  Quality recognition  -  Soft independent modeling of class analogies  -  Spectrograms  -  Well performance  -  Xihu Longjing tea
  Classification code:801 Chemistry  -  821.0 Woodlands and Forestry  -  913.3 Quality Assurance and Control  -  922.2 Mathematical Statistics
  DOI:10.6041/j.issn.1000-1298.2012.12.024
  Database:Compendex

5. Accession number:20130315915057
  Title:Flow distribution characteristics of deflector in micro channel heat exchanger
  Authors:Liu, Wei1 ; Zhu, Chunling1  
  Author affiliation:1  College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
  Corresponding author:Zhu, C. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:257-261
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Four different test samples (no deflector, deflector with one hole, deflector with five holes, and deflector with twelve holes in the manifold) of micro-channel evaporator with parallel flow were processed. Flow distribution characteristics of deflectors were experimentally studied with water as the working fluid. The results showed that when the entrance Reynolds number was less than 3 000, the influence of which on the flow distribution characteristics of both the samples without deflector and with the deflector with one hole was apparent, and the flow distribution uniformity and stability of the two test samples were poor, but the sample without deflector was better than the deflector with one hole. After the entrance Reynolds number was more than 3 000, the uniformity and stability of the deflector with one hole was becoming better, but the uniformity of the sample without deflector was the worst in four of the test samples. The deflector with five holes had the good and stable flow distribution uniformity when the Reynolds number was less than 4 000. As the Reynolds number was more than 4 000, the flow distribution uniformity was worse. In comparison, the flow distribution uniformity and stability of the deflector with twelve holes were always the best in all the test samples, and as the entrance Reynolds number increased, the uniformity of flow distribution was improved slightly.
  Number of references:11
  Main heading:Reynolds number
  Controlled terms:Experiments  -  Heat exchangers
  Uncontrolled terms:Deflector  -  Flow distribution  -  Flow distribution uniformities  -  Stable flows  -  Test samples  -  Working fluid
  Classification code:616.1 Heat Exchange Equipment and Components  -  631.1 Fluid Flow, General  -  901.3 Engineering Research
  DOI:10.6041/j.issn.1000-1298.2012.12.046
  Database:Compendex

6. Accession number:20130315915018
  Title:State estimation for 4WD vehicle based on information of tyre force sensor
  Authors:Gao, Bolin1 ; Chen, Hui1  
  Author affiliation:1  Clean Energy Automotive Engineering Center, Tongji University, Shanghai 200092, China
  Corresponding author:Chen, H. (hui-chen@mail.#edu.cn) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:22-27
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A state estimation method for 4WD vehicle was demonstrated by measuring lateral tire forces and longitudinal tire forces. Based on 3-DOF vehicle model, a state observer was realized using extended Kalman filter technique. The observer provided several advantages that the vehicle velocity and sideslip angle estimates could be robust with variance of wheel slip ratio and road friction under extreme adherence condition, such as split friction road. The paper demonstrated the appropriateness of this observer by slalom simulation test using veDYNA software. Simulation results were compared with traditional nonlinear state observer. The comparisons indicated that the longitudinal velocity and sideslip angle estimates of proposed observer both approached the true value very well. The maximum errors were no more 0.6 km/h and 0.2°, comparing to 25 km/h and 3° of the maximum errors of traditional nonlinear state observer. The proposed estimation method was an effective self- adaptation approach to wheel slip ratio and road friction condition.
  Number of references:11
  Main heading:State estimation
  Controlled terms:Errors  -  Estimation  -  Extended Kalman filters  -  Friction  -  Roads and streets  -  Sensors  -  Software testing  -  Tribology  -  Vehicles  -  Wheels
  Uncontrolled terms:Estimation methods  -  Kalman filter technique  -  Lateral tire force  -  Longitudinal velocity  -  Maximum error  -  Nonlinear state  -  Road friction  -  Sideslip angles  -  Simulation tests  -  State estimation methods   -  State observer  -  Tire forces  -  Tyre forces  -  Vehicle model  -  Vehicle velocity  -  Wheel slips
  Classification code:931.1 Mechanics  -  931 Classical Physics; Quantum Theory; Relativity  -  921 Mathematics  -  801 Chemistry  -  731.1 Control Systems  -  723.5 Computer Applications  -  601.2 Machine Components  -  432 Highway Transportation  -  406.2 Roads and Streets
  DOI:10.6041/j.issn.1000-1298.2012.12.005
  Database:Compendex

7. Accession number:20130315915014
  Title:Simulation and experiment of vehicle inerter suspension system
  Authors:Wang, Ruochen1 ; Chen, Bing1 ; Zhang, Xiaoliang1 ; Chen, Long1 ; Jiang, Haobin1 
  Author affiliation:1  School of Automobile and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China
  Corresponding author:Wang, R. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:1-4
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Two types of suspension with inerters were designed. The mathematical model of suspension with inerters was built. The suspension with inerters ofIandIItypes were set up. With the multi-objective optimization methods, the performance parameters of the two types were obtained. Based on the simulation, the bench test was done and the simulation was consistent with the test results. It shows that the suspension with inerters exerts the feature that spring was phase leg, damper was neutral and inerters was phase advance. The vehicle vibration isolation performance was increased and the comprehensive performance of vehicle was coordinated.
  Number of references:17
  Main heading:Automobile suspensions
  Controlled terms:Experiments  -  Mathematical models  -  Multiobjective optimization  -  Suspensions (components)  -  Suspensions (fluids)  -  Vehicles  -  Vibrations (mechanical)
  Uncontrolled terms:Bench tests  -  Comprehensive performance  -  Inerter  -  Multi objective optimizations (MOO)  -  Performance parameters  -  Phase advance  -  Simulation  -  Suspension system  -  Vehicle vibrations
  Classification code:921.5 Optimization Techniques  -  921 Mathematics  -  901.3 Engineering Research  -  931.1 Mechanics  -  804 Chemical Products Generally  -  601.2 Machine Components  -  432 Highway Transportation  -  632.1 Hydraulics
  DOI:10.6041/j.issn.1000-1298.2012.12.001
  Database:Compendex

8. Accession number:20130315915046
  Title:Detection of surface defects on fruits using spherical intensity transformation
  Authors:Huang, Wenqian1, 2 ; Li, Jiangbo2 ; Zhang, Chi2 ; Li, Bin2 ; Chen, Liping2 ; Zhang, Baihai1  
  Author affiliation:1  School of Automation, Beijing Institute of Technology, Beijing 100081, China
                 2  National Engineering Research Center for Information Technology in Agriculture, Beijing 100097, China
  Corresponding author:Zhang, B. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:187-191
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The non-uniform intensity distribution on the fruit's images is the main reason resulting in the difficulty and low accuracy of surface defects detection by using a machine vision system. A detection system based on Vis-NIR double CCDs was built for detecting surface defects on 'Akesu' apples. A spherical intensity transformation method (SITM) was proposed to transform the R channel image of an apple, which enhanced the intensity uniformity of the normal regions and kept the low intensity of the defected regions in an apple. The intensity contrast between the defect regions and those of normal tissue was also improved, which increased the defect detection accuracy. A defect detection algorithm was developed based on the SITM and 100 apples consisting of 45 defected apples and 55 intact apples were used to evaluate the performance of the algorithm. Results showed that 93.3% of defected apples were correctly classified and 100% of the intact apples were correctly recognized. The overall detection accuracy was 97%. It is feasible to extract the surface defects on apples using the proposed SITM combining with a single threshold segmentation method.
  Number of references:16
  Main heading:Fruits
  Controlled terms:Computer vision  -  Defects  -  Spheres  -  Surface defects  -  Tissue
  Uncontrolled terms:Apple  -  Defect detection  -  Defect detection algorithm  -  Defects detection  -  Detection accuracy  -  Detection system  -  Intensity distribution  -  Low-intensity  -  Machine vision systems  -  Normal tissue   -  Spherical intensity transformation  -  Threshold segmentation  -  Transformation methods
  Classification code:951 Materials Science  -  821.4 Agricultural Products  -  723.5 Computer Applications  -  631 Fluid Flow  -  461.2 Biological Materials and Tissue Engineering  -  423 Non Mechanical Properties and Tests of Building Materials  -  421 Strength of Building Materials; Mechanical Properties
  DOI:10.6041/j.issn.1000-1298.2012.12.034
  Database:Compendex

9. Accession number:20130315915051
  Title:3-D steady simulation of temperature pattern inside single plastic greenhouse using CFD
  Authors:Hao, Feilin1 ; Shen, Mingwei2 ; Zhang, Ya3 
  Author affiliation:1  College of Biology and Environmental Engineering, Zhejiang Shuren University, Hangzhou 310015, China
                 2  School of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou 310058, China
                 3  Research Institute of Vegetable Cultivation, Hangzhou Agricultural Academy, Hangzhou 310024, China
  Corresponding author:Shen, M. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:222-228
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:To explore the temperature distribution in the simple plastic greenhouse of south China, a model was established including component of inner and outer space, inside plant and soil layer, etc. Based on analysis of solar radiation and heat exchange between different components, 3-D steady simulation of temperature distribution was carried out in greenhouse. The Monte Carlo model was adopted in thermal radiation and transfer process, shear stress transport (SST) model was used in air turbulence analysis, and the crop was simplified as continuum. The result showed that the value of simulation was a bit higher than that of the measurement. The absolute error was below 2.2°C and relative error was 6.7%. The airflow had an obvious effect on temperature distribution and fluctuation, and the temperature of inlet side was lower than that of outlet side. It seems feasible to consider the crop as continuum in simulation model in this case, while the simulation value showed a bit higher.
  Number of references:18
  Main heading:Computer simulation
  Controlled terms:Computational fluid dynamics  -  Crops  -  Geologic models  -  Greenhouses  -  Sun  -  Temperature distribution  -  Three dimensional computer graphics
  Uncontrolled terms:Absolute error  -  Air turbulence  -  CFD simulations  -  Heat exchange  -  Monte Carlo model  -  Outer space  -  Plastic greenhouse  -  Relative errors  -  Shear-stress transport  -  Simulation model   -  Soil layer  -  South China  -  Steady simulation  -  Temperature patterns  -  Transfer process
  Classification code:481.1 Geology  -  641.1 Thermodynamics  -  657.2 Extraterrestrial Physics and Stellar Phenomena  -  723.5 Computer Applications  -  821.4 Agricultural Products  -  821.6 Farm Buildings and Other Structures
  DOI:10.6041/j.issn.1000-1298.2012.12.040
  Database:Compendex

10. Accession number:20130315915058
  Title:Fine experiment and finite element analysis for static stiffness of vertical machining center
  Authors:Li, Dianxin1 ; Zhao, Yanmin1 ; Zhang, Jianfu1 ; Feng, Pingfa1  
  Author affiliation:1  Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China
  Corresponding author:Feng, P. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:262-267 277
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Static stiffness of a vertical machining center was researched based on fine experiment and finite element method. Static stiffness of three directions and deformation of the main parts were measured. Deformation of the spindle box was measured and detailed analysis was taken. Deformation of the joint between spindle box and column was measured. The results showed that weak leak of the joint is y direction. Finite element model of the machining center was established in Workbench and accuracy of the model was verified compared with experiments.
  Number of references:10
  Main heading:Finite element method
  Controlled terms:Deformation  -  Experiments  -  Machining centers  -  Stiffness
  Uncontrolled terms:Finite element models  -  Performance analysis  -  Static stiffness  -  Vertical machining
  Classification code:421 Strength of Building Materials; Mechanical Properties  -  422 Strength of Building Materials; Test Equipment and Methods  -  603.1 Machine Tools, General  -  901.3 Engineering Research  -  921.6 Numerical Methods  -  951 Materials Science
  DOI:10.6041/j.issn.1000-1298.2012.12.047
  Database:Compendex

11. Accession number:20130315915024
  Title:Seeding accuracy test experiment based on soil substrate
  Authors:Zhang, Junxiong1 ; Ma, Zenghong1 ; Li, Wei1 ; Song, Peng1 ; Dong, Xiangqian1 
  Author affiliation:1  College of Engineering, China Agricultural University, Beijing 100083, China
  Corresponding author:Zhang, J. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:62-66 71
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A seeding accuracy test experiment based on soil substrate was investigated. The moving trolley carried the sowing seeders. Meanwhile, the machine vision system sequential images dynamically were collected. Using encoder and PLC etc., it realized to control camera to collect sequential images through detecting the motion distance of trolley, which realized hardware splicing of the sequential images. In addition of splicing algorithm of image processing, the identification of seeds and the total splicing of the sequential images were completed. Experimental results showed that the matching rate of seed spacing was above 85%, and the accuracy rate of seed spacing was more than 70%. The experiment was repeated many times. The absolute error of the seeding accuracy data was within 4%.
  Number of references:11
  Main heading:Soils
  Controlled terms:Computer vision  -  Experiments  -  Image processing
  Uncontrolled terms:Absolute error  -  Accuracy rate  -  Accuracy test  -  Machine vision systems  -  Seed spacing  -  Seeder  -  Sequential images
  Classification code:483.1 Soils and Soil Mechanics  -  741 Light, Optics and Optical Devices  -  741.2 Vision  -  901.3 Engineering Research
  DOI:10.6041/j.issn.1000-1298.2012.12.012
  Database:Compendex

12. Accession number:20130315915031
  Title:Starting performance effects of combining angle on combined type VAWT
  Authors:Li, Yan1 ; Tian, Wenqiang1 ; Feng, Fang2 ; Ding, Guoqi1 ; He, Qingbin1 
  Author affiliation:1  College of Engineering, Northeast Agricultural University, Harbin 150030, China
                 2  College of Science, Northeast Agricultural University, Harbin 150030, China
  Corresponding author:Li, Y. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:102-106
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Combined with Savonius rotor is an important way to improve starting performance of straight-bladed vertical axis wind turbine (SB-VAWT). The starting performance of the combined type VAWT was largely affected by the combining angle of the two type turbines. Firstly, an SB-VAWT with NACA0018 and FX63-145 airfoils and a Savonius rotor were made and their starting performances were respectively tested. Then, optimal starting performance area of Savonius rotor was respectively combined with optimal starting performance area and the worse starting performance of SB-VAWT, starting performances of combined type VAWT with four different combining ways were tested by using a wind tunnel. For SB-VAWT with symmetrical airfoils, better starting performance of combined type VAWT can be obtained when its optimal starting performance area was combined with Savonius rotor. For SB-VAWT with asymmetric airfoils, both of the two ways have advantages and disadvantages.
  Number of references:12
  Main heading:Optimization
  Controlled terms:Airfoils  -  Wind turbines
  Uncontrolled terms:Combined type  -  Combining angle  -  Savonius rotor  -  SB-VAWT  -  Starting performance  -  Wind tunnel tests
  Classification code:615.8 Wind Power (Before 1993, use code 611 )  -  652.1 Aircraft, General  -  921.5 Optimization Techniques
  DOI:10.6041/j.issn.1000-1298.2012.12.019
  Database:Compendex

13. Accession number:20130315915035
  Title:Farm products quality safety emergency management system based on rough set and WebGIS
  Authors:Qian, Jianping1, 2 ; Wu, Xiaoming1 ; Yang, Xinting1 ; Xing, Bin1 ; Wang, Fengli1 
  Author affiliation:1  National Engineering Research Center for Information Technology in Agriculture, Beijing 100097, China
                 2  School of Information Science and Technology, Beijing Forestry University, Beijing 100083, China
  Corresponding author:Yang, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:123-129
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:According to the characteristics of farm products quality safety incidents, ten samples were processed by the reduction and analysis of attributes using the rough set method, and five indexes were determined. The indexes was toxicity of pollution source, scope of pollution influence, number of death, number of injuries and population density, whose weights were 0.2, 0.2, 0.1, 0.3 and 0.2, respectively, according to the importance analysis of the indexes. Based on these, a grade evaluation model of farm products quality safety accidents was established. An emergency management system of farm products quality safety was designed and implemented by programming the grade evaluation model using WebGIS. Through simulating a particular farm products quality safety accident, the result showed that the system could improve the handling ability of the accident, and realized the visualization of the disposal process. The system can provide consultation for farm products quality safety management.
  Number of references:17
  Main heading:Rough set theory
  Controlled terms:Accidents  -  Civil defense  -  Disasters  -  Pollution  -  Population statistics  -  Risk management
  Uncontrolled terms:Disposal process  -  Emergency management  -  Emergency management systems  -  Evaluation models  -  Importance analysis  -  Pollution sources  -  Population densities  -  Products quality  -  Quality safety  -  Rough set   -  Web-GIS
  Classification code:404.2 Civil Defense  -  454.2 Environmental Impact and Protection  -  914.1 Accidents and Accident Prevention  -  921.4 Combinatorial Mathematics, Includes Graph Theory, Set Theory  -  922.1 Probability Theory  -  922.2 Mathematical Statistics
  DOI:10.6041/j.issn.1000-1298.2012.12.023
  Database:Compendex

14. Accession number:20130315915025
  Title:Corn seed damaging experiment in truncated cone precision metering
  Authors:Xia, Lianming1 ; Wang, Xiangyou1 ; Geng, Duanyang1 
  Author affiliation:1  School of Agricultural and Food Engineering, Shangdong University of Technology, Zibo 255049, China
  Corresponding author:Wang, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:67-71
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Based on the problem of high seed damaging, a precision metering was proposed based on the pelleted corn seeds.The two times orthogonal rotational regressive tests were designed in the experiments. The rotary speed, diameter of the cell, cone angle of the metering seeding plate were defined as input parameters and seed damaging index was defined as output parameters. The regression mathematics models between output parameters and input parameters were established and then parameters were optimized through Design-Expert 7.1. The optimal combination was that the rotary speed of 13.2 r/min, diameter of the cell of 16 mm, cone angle of the metering seeding plate of 26.5°, at that time the seed damaging index of 0.65%. Confirmatory tests showed that the inaccuracy was little.
  Number of references:10
  Main heading:Pelletizing
  Controlled terms:Experiments  -  Optimization
  Uncontrolled terms:Cone angle  -  Confirmatory test  -  Corn seeds  -  Damage  -  Design-expert  -  Input parameter  -  Mathematics model  -  Metering devices  -  Optimal combination  -  Output parameters   -  Pelleted corn  -  Precision metering  -  Rotary speed  -  Truncated cone
  Classification code:802.3 Chemical Operations  -  901.3 Engineering Research  -  921.5 Optimization Techniques
  DOI:10.6041/j.issn.1000-1298.2012.12.013
  Database:Compendex

15. Accession number:20130315915030
  Title:Effects of geometrical parameters of improved gurney flap on airfoil aerodynamic characteristics
  Authors:Zhang, Xu1 ; Li, Wei2 ; Xing, Jingzhong1 ; Xiao, Xia1 
  Author affiliation:1  Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology, Tianjin Polytechnic University, Tianjin 300387, China
                   2  School of Energy and Safety Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China
  Corresponding author:Zhang, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:97-101 106
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The trailing edge of wind turbine airfoil S822 was modified by adding a Gurney flap and smoothing the lower cambered surface. The aerodynamic characteristics of S822 airfoil and its improved Gurney flap airfoils were studied with k-ω SST turbulence model. The effects of the flap height and starting modification position on the lift and drag coefficients, lift-drag ratio, airfoil surface pressure distribution and flow field characteristics were analyzed. The results showed that if the starting modification position was the same, the lift coefficient in certain range of attack angle and the drag coefficient increased with the increasing of the flap height. The lift-drag ratio was the maximum when the flap height was 2% chord length. If the flap height was the same, the lift coefficient and lift-drag ratio increased, and the drag coefficient changed little when the starting modification position was gradually close to the trailing edge. The research can provide references for designing airfoils of wind turbine blade.
  Number of references:15
  Main heading:Lift
  Controlled terms:Airfoils  -  Drag coefficient  -  Lift drag ratio  -  Wind turbines
  Uncontrolled terms:Aerodynamic characteristics  -  Airfoil aerodynamics  -  Airfoil surfaces  -  Attack angle  -  Chord lengths  -  Flow field characteristics  -  Geometrical parameters  -  Gurney flaps  -  Lift and drag  -  Lift coefficient   -  Trailing edges  -  Wind turbine airfoils  -  Wind turbine blades
  Classification code:615.8 Wind Power (Before 1993, use code 611 )  -  651.1 Aerodynamics, General  -  652.1 Aircraft, General
  DOI:10.6041/j.issn.1000-1298.2012.12.018
  Database:Compendex

16. Accession number:20130315915029
  Title:Influence of Spraying Parameters of Unmanned Aircraft on Droplets Deposition
  Authors:Zhang, Jing1 ; He, Xiongkui1 ; Song, Jianli1 ; Zeng, Aijun1 ; Zeng, Aijun1 ; Liu, Yajia1 ; Li, Xuefeng1 
  Author affiliation:1  College of Science, China Agricultural University, Beijing 100193, China
  Corresponding author:He, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:94-96
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The influence of application parameters of unmanned aircraft on droplets deposition was researched. Temperature change rate was tested by thermal infrared imager to reflect the droplets deposit on rice canopy. The results showed that there was no difference with the droplets deposition and canopy temperature change rate as evaluation index. Thermal infrared imager could reflect the droplets deposit law exactly. The optimum application parameters of WPH642 unmanned aircraft were that flight altitude of 2 m and flight velocity of 1.5 m/s.
  Number of references:10
  Main heading:Drops
  Controlled terms:Aircraft  -  Deposits  -  Infrared imaging  -  Infrared radiation
  Uncontrolled terms:Application parameters  -  Canopy temperature  -  Droplet deposition  -  Evaluation index  -  Flight altitudes  -  Flight velocity  -  Rice canopy  -  Spraying parameters  -  Temperature changes  -  Thermal infrared imager   -  Thermal infrared imaging  -  Unmanned aircrafts
  Classification code:746 Imaging Techniques  -  741.1 Light/Optics  -  652.1 Aircraft, General  -  617 Turbines and Steam Turbines  -  612 Engines  -  532 Metallurgical Furnaces  -  443.1 Atmospheric Properties
  DOI:10.6041/j.issn.1000-1298.2012.12.017
  Database:Compendex

17. Accession number:20130315915044
  Title:Image segmentation method based on YUV color space for tomato harvesting robot
  Authors:Lin, Weiming1 ; Hu, Yuntang1 
  Author affiliation:1  School of Mechanical and Materials Engineering, Jiujiang University, Jiujiang 332005, China
  Corresponding author:Lin, W. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:176-180
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In the research of segmentation of the target image for tomato harvesting robot, the accuracy was affected by illumination and calculation complication. Firstly, the characteristics of RGB, HIS and YUV color spaces were compared. It was theoretically analyzed that the YUV color space applying to tomato harvesting robot vision system was feasible. Then, the threshold value of the ripe tomato in their color spaces was given according to the results of experiments and experience. The double-threshold algorithm based on YUV color space was put forward to apply to the tomato harvesting robot vision system. And the experiments under different illumination were designed to segment ripe tomato respectively in RGB, HIS and YUV color space in order to test the effect of those algorithms. The experiments also showed that the algorithm based on YUV color space had the better robust and the better real-time than the others.
  Number of references:17
  Main heading:Computer vision
  Controlled terms:Algorithms  -  Experiments  -  Fruits  -  Harvesting  -  Image segmentation  -  Robots
  Uncontrolled terms:Color space  -  Harvesting robot  -  Segmentation methods  -  Target images  -  Tomato  -  YUV color space
  Classification code:723 Computer Software, Data Handling and Applications  -  731.5 Robotics  -  821.3 Agricultural Methods  -  821.4 Agricultural Products  -  901.3 Engineering Research  -  921 Mathematics
  DOI:10.6041/j.issn.1000-1298.2012.12.032
  Database:Compendex

18. Accession number:20130315915053
  Title:Singularity judge deriving and singularity analysis for 6_PUS parallel mechanism
  Authors:Tan, Xingqiang1 ; Xie, Zhijiang2 ; Xie, Yongchun1 
  Author affiliation:1  College of Mechanical Engineering, Panzhihu University, Panzhihua 617000, China
                  2  College of Mechanical Engineering, Chongqing University, Chongqing 400044, China
  Corresponding author:Xie, Z. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:234-239 250
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Based on force screw equilibrium equation of a kind of 6_PUS parallel mechanism and decomposed force of its' branches, force Jaccobian was derived and then kinematic Jaccobian was got. By kinematic Jaccobian, singurality conditions of 6_PUS parallel mechanism were achieved and the geometry characteristics in two kinds singularities of this parallel mechanism were drawn. In order to study conveniently on singularities of the mechanism in its' full work space, a concept that called singularity field was put forward to express the mechanism actually running. As the base to research singularity and to avoid singularity, the expression equations of singularity field were built. The distribution of two kinds of singularities in full work space of this 6_PUS mechanism was obtained and methods for avoid singularities or forbid mechanism running at singularities point were brought out for reference to design of this kind mechanism.
  Number of references:17
  Main heading:Mechanisms
  Controlled terms:Kinematics  -  Screws
  Uncontrolled terms:Equilibrium equation  -  Geometry characteristics  -  Parallel mechanisms  -  Singularity  -  Singularity analysis  -  Singularity field  -  Work space
  Classification code:601.3 Mechanisms  -  605 Small Tools and Hardware  -  931.1 Mechanics
  DOI:10.6041/j.issn.1000-1298.2012.12.042
  Database:Compendex

19. Accession number:20130315915037
  Title:Determination of aureomycin content in duck meat using LSSVR and synchronous fluorescence spectroscopy
  Authors:Zhao, Jinhui1 ; Yuan, Haichao1 ; Liu, Muhua1 ; Xiao, Haibin1 ; Xu, Jiang1 
  Author affiliation:1  College of Engineering, Jiangxi Agricultural University, Nanchang 330045, China
  Corresponding author:Liu, M. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:136-140
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to achieve the rapid prediction of aureomycin contents in duck meat, quantitative analysis models of aureomycin contents in duck meat were established by using synchronous fluorescence spectroscopy and LSSVR method. Firstly, synchronous fluorescence spectroscopies between 250 nm and 450 nm were analyzed by using 3-D synchronous fluorescence spectroscopy, and 70 nm was selected as the optimum wavelength difference. Secondly, the sym8 wavelet with two levels decomposition was used to complete the pretreatment of the original synchronous fluorescence spectroscopy, and 16 characteristic wavelengths were selected as the inputs of detection model combining with genetic algorithm and the root mean square error of cross-validation. Lastly, the performances of three models of LSSVR, BP and SVM_SteveGunn were compared. LSSVR model was optimal among them, and the determination coefficient R2 and the root mean squared error of prediction samples were 0.949 1 and 2.566 0, respectively. The experimental results showed that it was feasible to predict the aureomycin contents in duck meat combining with synchronous fluorescence spectroscopy and LSSVR.
  Number of references:15
  Main heading:Fluorescence spectroscopy
  Controlled terms:Antibiotics  -  Forecasting  -  Mean square error  -  Meats  -  Wavelet decomposition
  Uncontrolled terms:Aureomycin  -  Cross validation  -  Detection models  -  Determination coefficients  -  LSSVR  -  Optimum wavelength  -  Pre-Treatment  -  Quantitative analysis model  -  Root mean square errors  -  Root mean squared errors   -  Synchronous fluorescence spectroscopy  -  Three models  -  Wavelet
  Classification code:731.1 Control Systems  -  741.3 Optical Devices and Systems  -  804.1 Organic Compounds  -  822.3 Food Products  -  921 Mathematics  -  921.3 Mathematical Transformations
  DOI:10.6041/j.issn.1000-1298.2012.12.025
  Database:Compendex

20. Accession number:20130315915027
  Title:Anti-drift technology of super-high clearance boom sprayer with air-assisted system
  Authors:Zhang, Tie1 ; Yang, Xuejun1 ; Yan, Herong1 ; Wang, Jun1 ; Dong, Xiang1 
  Author affiliation:1  Chinese Academy of Agricultural Mechanization Sciences, Beijing 100083, China
  Corresponding author:Yang, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:77-86
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A droplet deposition and drift distribution model was established for super-high clearance boom sprayer with air-assisted system in accordance with the actual structure of sprayer. The CFD software ANSYS Fluent was used. The standard k-Ε turbulence model, discrete phase model and couple algorithm were adopted. The simulation test was designed to study the relationship of drift rate with its influencing factors. The functional relation of droplet drift rate with its influencing factors at different rotation speed of axial-flow fan was established and the accuracy of the simulation result was validated. The results showed that, the model was well fitted, and the parameters of air-assisted system can affect the drift significantly. These conditions include angle of air-assisted flow, nozzle horizontal position, natural wind velocity, rotation speed of axial-flow fan, interaction between angle of air-assisted flow and natural wind velocity, interaction between angle of air-assisted flow and rotation speed of axial-flow fan, interaction between nozzle horizontal position and natural wind velocity, interaction between rotation speed of axial-flow fan and natural wind velocity.
  Number of references:20
  Main heading:Air
  Controlled terms:Aircraft propulsion  -  Drops  -  Nozzles  -  Turbulence models  -  Velocity
  Uncontrolled terms:Air-assisted system  -  Boom sprayer  -  CFD softwares  -  Discrete phase model  -  Distribution models  -  Drift rates  -  Droplet deposition  -  Functional relation  -  Natural wind  -  Rotation speed   -  Simulation tests  -  Super-high clearance
  Classification code:631.1 Fluid Flow, General  -  653.1 Aircraft Engines, General  -  804 Chemical Products Generally  -  931.1 Mechanics
  DOI:10.6041/j.issn.1000-1298.2012.12.015
  Database:Compendex

21. Accession number:20130315915020
  Title:Mechanical performance test of magnetorheological damper
  Authors:Feng, Zhimin1 ; Wu, Guangbin1 ; Zhang, Gang1 
  Author affiliation:1  Faculty of Maritime and Transportation, Ningbo University, Ningbo 315211, China
  Corresponding author:Feng, Z. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:33-38
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:To improve damping force and reduce response time of magnetorheological (MR) damper, an optimal structure designing method was presented. The structure optimal methods, including reverse series of excitation coils and composed permanent magnets piston structure, was based on the calculation of resultant magnetic field for different excitation coil winding approachs. According to the provided structure optimal method, a MR damper was manufactured and its mechanical performances were tested on type DS-100 fatigue-testing machine with different forcing vibration frequency, vibration amplitude and control current. The experiments showed that the damping force of the proposed MR increased by 65%, and the response time reduces to more than a half at the most. This result provided an important reference to further mechanical property improvement of MR damper.
  Number of references:11
  Main heading:Structural optimization
  Controlled terms:Damping  -  Mechanical properties  -  Soft magnetic materials  -  Vibrations (mechanical)
  Uncontrolled terms:Control current  -  Damping forces  -  Designing methods  -  Excitation coils  -  Magneto-rheological dampers  -  Mechanical performance  -  Mechanical property improvement  -  MR dampers  -  Optimal methods  -  Optimal structures   -  Performance tests  -  Structure optimization  -  Vibration amplitude  -  Vibration frequency
  Classification code:708.4 Magnetic Materials  -  921.5 Optimization Techniques  -  931.1 Mechanics
  DOI:10.6041/j.issn.1000-1298.2012.12.007
  Database:Compendex

22. Accession number:20130315915039
  Title:Ageing mechanism and meat quality during postmortem ageing of yak meat
  Authors:Tian, Jiachun1 ; Han, Ling1 ; Liu, Xin1 ; Shi, Xixiong1 ; Wang, Wenting1 ; Guo, Zhaobin1 
  Author affiliation:1  College of Food Science and Engineering, Gansu Agricultural University, Lanzhou 730070, China
  Corresponding author:Han, L. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:146-150
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The indicators about ageing mechanism including pH value, content of glycogen, myofibril fragmentation index (MFI), the activities of calpains and cathepsin L and meat quality including pressing loss, cooking loss, shear force and chromaticity during ageing of eight days were determinated from ten Qinghai yaks. The correlation between shear force and MFI, activities of calpains and cathepsins L were also analyzed. The results showed that the all above mentioned indicators changed during the ageing period, and the direct reflect was improving the yak meat tenderness. MFI had a very significantly(P<0.01)correlated with the activities of calpains, and had a significantly correlated with the activity of cathepsin L(P<0.05), while there was a significant negative correlated with the activity of cathepsin L(P<0.05).
  Number of references:26
  Main heading:Thermal processing (foods)
  Controlled terms:Meats
  Uncontrolled terms:Calpains  -  Cathepsin L  -  Fragmentation index  -  Meat quality  -  Meat tenderness  -  pH value  -  Shear force  -  Tenderness
  Classification code:822.2 Food Processing Operations  -  822.3 Food Products
  DOI:10.6041/j.issn.1000-1298.2012.12.027
  Database:Compendex

23. Accession number:20130315915015
  Title:Effect of caster angle on multiple limit cycles in independent suspension shimmy
  Authors:Wei, Daogao1 ; Jiang, Gensheng2 
  Author affiliation:1  School of Mechanical and Automotive Engineering, Hefei University of Technology, Hefei 230009, China
                 2  Shengda Special Vehicle Co., Ltd., Yangzhou 225003, China
  Corresponding author:Wei, D. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:5-10
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Considered the front alignment, a 4-DOF vehicle shimmy model with independent suspension was established by Lagrange equation. The numerical analysis for the speed range of multiple limit cycles and numerical characteristics was performed with respect to the change of the caster angle. It showed that the speed range of multiple limit cycles was advanced. The amplitude of unstable limit cycles was reduced. The amplitude of stable limit cycles was enlarged and the frequency didn't change with increasing caster angle. The paper result was helpful to provide theoretical reference for reducing vehicle shimmy and controlling of multiple limit cycles.
  Number of references:12
  Main heading:Delta sigma modulation
  Controlled terms:Automobile suspensions  -  Equations of motion  -  Numerical analysis  -  Vehicles
  Uncontrolled terms:Caster angle  -  Lagrange equation  -  Limit cycle  -  Multiple limit cycles  -  Numerical characteristics  -  Shimmy  -  Shimmy model  -  Speed range  -  Stable limit cycle  -  Unstable limit cycles
  Classification code:432 Highway Transportation  -  632.1 Hydraulics  -  716 Telecommunication; Radar, Radio and Television  -  921.2 Calculus  -  921.6 Numerical Methods
  DOI:10.6041/j.issn.1000-1298.2012.12.002
  Database:Compendex

24. Accession number:20130315915019
  Title:Matching characteristics between friction properties of automatic transmission fluid and shifting elements in automatic transmission
  Authors:Jiang, Enqiao1 ; Wang, Shuhan1 ; Guo, Mingzhong2 ; Liu, Yanfang1 ; Xu, Xiangyang1 ; Dong, Peng3 
  Author affiliation:1  Department of Automobile Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
                  2  Engineering Technology Research Center, Shengrui Transmission Corporation Limited, Weifang 261205, China
                  3  Institute for Engineering Design and Powertrain Technologies, Chemnitz University of Technology, Chemnitz 09107, Germany
  Corresponding author:Wang, S. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:28-32 86
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The matching analysis was carried out between automatic transmission (AT) and the friction characteristics of automatic transmission fluid (ATF). The evaluation indexes of shifting elements in AT and the key characteristics of ATF which influenced the evaluation indexes of shifting elements in AT were confirmed. The dynamical model and the dynamic simulation model were built. The calculation and simulation analysis were done for torque capacity, power density, and friction work. The matching requirements between the shifting elements in AT and the friction characteristics of ATF could be obtained. The feasibility, correctness and effectiveness of the method could be proved.
  Number of references:7
  Main heading:Tribology
  Controlled terms:Computer simulation  -  Friction
  Uncontrolled terms:Automatic transmission  -  Automatic transmission fluids  -  Dynamical model  -  Evaluation index  -  Friction characteristics  -  Friction properties  -  Friction work  -  Key characteristics  -  Matching characteristics  -  Power densities   -  Simulation analysis  -  Torque capacity
  Classification code:723.5 Computer Applications  -  931 Classical Physics; Quantum Theory; Relativity  -  931.1 Mechanics
  DOI:10.6041/j.issn.1000-1298.2012.12.006
  Database:Compendex

25. Accession number:20130315915017
  Title:Simulation of road-friendliness of heavy vehicle on 3-D random road
  Authors:Liu, Dawei1 ; Jiang, Rongchao1 ; Chen, Huanming1 ; Yan, Tianyi1 
  Author affiliation:1  College of Mechanical and Electronic Engineering, Qingdao University, Qingdao 266071, China
  Corresponding author:Liu, D. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:16-21 10
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A mathematical model of 3-D random road surface was established based on the basic principles of harmonic superposition and triangulated irregular network. A rigid flexible coupling multi-body dynamic model of a heavy truck was established by using SIMPACK software, which included front suspension, rear balance suspension, steering system, tire system, etc. The tires and leaf springs were treated as deformable body, and rubber pads and limit block were reduced to force elements with non-linear stiffness and damping characteristics. Then a ride dynamic model of heavy vehicle was established, which combined virtual prototype vehicle with 3-D random road surface model by using SIMPACK software. The dynamic load coefficient and 95 percentage fourth power aggregate forces were used as the road-friendliness criterions for analyzing the road-friendliness of heavy vehicles with different speed. Simulation results indicated that, when the vehicle drove on the B- and C-grade 3-D random road at the speed of 60~90 km/h, the road friendliness of mid-axle and rear-axle reduced as the vehicle speed increased. The road friendliness of front-axle didn't increase as the vehicle speed increased. When the vehicle speed surpassed 80 km/h, the road friendliness of front-axle began to decrease. The road friendliness of the vehicle reduced as the vehicle speed increased. The road friendliness of B-grade road reduced by a big margin, while the road friendliness of C- grade road reduced by a small margin.
  Number of references:20
  Main heading:Roads and streets
  Controlled terms:Automobile steering equipment  -  Automobile suspensions  -  Dynamic loads  -  Dynamic models  -  Flexible couplings  -  Front axles  -  Speed  -  Three dimensional computer graphics  -  Tires  -  Vehicles
  Uncontrolled terms:Basic principles  -  Deformable bodies  -  Different speed  -  Force elements  -  Heavy truck  -  Heavy vehicle  -  Load coefficients  -  Multi-body dynamic  -  Non-linear stiffness  -  Random road surfaces   -  Rigid flexible coupling  -  Road-friendliness  -  Rubber pads  -  SIMPACK  -  Simulation  -  Steering systems  -  Tire dynamics  -  Tire systems  -  Triangulated irregular networks  -  Vehicle speed   -  Virtual prototype
  Classification code:921 Mathematics  -  818.5 Rubber Products  -  723.5 Computer Applications  -  663.2 Heavy Duty Motor Vehicle Components  -  931.1 Mechanics  -  632.1 Hydraulics  -  432 Highway Transportation  -  408.1 Structural Design, General  -  406.2 Roads and Streets  -  602.2 Mechanical Transmissions
  DOI:10.6041/j.issn.1000-1298.2012.12.004
  Database:Compendex

26. Accession number:20130315915034
  Title:Design of video record for agricultural products traceability system
  Authors:Zhao, Chunjiang1 ; Hao, Ling1, 2 ; Yang, Xinting1 ; Chen, Ming2 ; Sun, Chuanheng1 ; Li, Wenyong1 
  Author affiliation:1  National Engineering Research Center for Information Technology in Agriculture, Beijing 100097, China
                 2  College of Information Technology, Shanghai Ocean University, Shanghai 201306, China
  Corresponding author:Yang, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:118-122
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:For the problems of production record information of agricultural products traceability system being unitary and less information, the video record of agricultural products traceability system was designed and developed, which achieved the purpose of the production process quality traced. The ARM9-based embedded technology with H.264 compression technology was combined, which collected and compressed the video record of agricultural products. And 3G wireless transmission technology was used for transmission of the video record. The video record production server was for storing the video record. Finally, the users can trace the video record by the software of the video record of agricultural products traceability system which was developed by the platform of .NET. The system collected the video record of the different stages of agricultural products, thus provided a more intuitive, abundant and persuasive information for agricultural products. The results of the system showed that the system had the versatility, high reliability, good stability, portable features, easy application for greenhouses and farms, thus other agricultural products to meet the different needs of users.
  Number of references:18
  Main heading:Agricultural products
  Controlled terms:Agricultural engineering  -  Mechanical engineering
  Uncontrolled terms:3G  -  3G wireless  -  Compression technologies  -  Embedded  -  Embedded technology  -  Good stability  -  High reliability  -  Production process  -  Production record  -  Traceability   -  Traceability systems  -  Video record
  Classification code:608 Mechanical Engineering, General  -  821 Agricultural Equipment and Methods; Vegetation and Pest Control  -  821.4 Agricultural Products
  DOI:10.6041/j.issn.1000-1298.2012.12.022
  Database:Compendex

27. Accession number:20130315915032
  Title:Physicochemical properties of biomass resources for sustainable supply
  Authors:Huo, Lili1 ; Tian, Yishui1 ; Zhao, Lixin1 ; Yao, Zonglu1 ; Meng, Haibo1  
  Author affiliation:1  Chinese Academy of Agricultural Engineering, Beijing 100125, China
  Corresponding author:Meng, H. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:107-113
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Change regularity of physicochemical properties of corn straw, peanut shell and sawdust which are supplied from different seasons was studied based on a case study of biomass solid fuel plant in Daxing district of Beijing. The results showed that total moisture of sawdust was higher, more than 40%. Total moisture of corn straw and peanut shell was about 10%. The bulk density, flow characteristics, calorific value, ash, volatile matter of three types of raw materials were varies. Sawdust had relatively high bulk density and volatile matter but lower ash. Peanut shell and sawdust dry basis calorific value was higher than corn straw high. However, as received basis calorific value has lower. Physicochemical properties of the same materials of different season were different; especially total moisture varied with the local climatic conditions. After June, dry basis calorific value of corn straw, peanut shell and sawdust were reduced about 7%, 3.5% and 5%. Therefore, difference of physicochemical properties of several of raw materials such as bulk density, flow characteristics should be fully considered during related equipments design process of storage, transport, and compression forming of raw materials. Furthermore for the combustible characteristics of raw materials, not only difference of physicochemical properties should be considered, but also different seasons.
  Number of references:14
  Main heading:Biomass
  Controlled terms:Calorific value  -  Fuels  -  Moisture  -  Oilseeds  -  Shells (structures)
  Uncontrolled terms:Biomass resources  -  Bulk density  -  Climatic conditions  -  Corn straws  -  Design process  -  Energy  -  Flow characteristic  -  Peanut shells  -  Physicochemical property  -  Solid fuels   -  Sustainable supply  -  Volatile matters
  Classification code:821.5 Agricultural Wastes  -  821.4 Agricultural Products  -  801.4 Physical Chemistry  -  524 Solid Fuels  -  523 Liquid Fuels  -  522 Gas Fuels  -  408.2 Structural Members and Shapes
  DOI:10.6041/j.issn.1000-1298.2012.12.020
  Database:Compendex

28. Accession number:20130315915026
  Title:Micromechanism of inner mechanical cracks generation and expansion of corn seed kernel
  Authors:Zhang, Xinwei1 ; Li, Xinping2 ; Yang, Dexu1 ; Liu, Dejun1 ; Gao, Lianxing1  
  Author affiliation:1  College of Engineering, Shenyang Agricultural University, Shenyang 110866, China
                 2  Vehicle and Motive Power Engineering College, Henan University of Science and Technology, Luoyang 471003, China
  Corresponding author:Gao, L. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:72-76
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Mechanism of inner mechanical cracks of corn seed kernel was researched by means of Cottrell piling up of dislocation theory. The formula of expanding speed and propagation route dimension of inner mechanical cracks were inferred based on theory of Griffith energy balance and fractal geometry. Crack growth rate was analyzed through fractal method. The results showed that inner mechanical cracks of corn seeds formed when part stress increased to a certain level. According to phoronomics formula of inner cracks propagation, the macro-speed propagation was less than fractal propagation speed. Fractal dimension of 1.139 5 was calculated by path formula of mechanical cracks propagation. The speed of cracks propagation along starch particles extending was faster than same size of starch particles.
  Number of references:15
  Main heading:Griffith cracks
  Controlled terms:Crack propagation  -  Energy balance  -  Fractal dimension  -  Fractals  -  Geomechanics  -  Starch  -  Stresses
  Uncontrolled terms:Corn seeds  -  Cottrell  -  Cracks generation  -  Cracks propagation  -  Dislocation models  -  Dislocation theory  -  Fractal geometry  -  Fractal methods  -  Griffith energy balance  -  Micro mechanisms   -  Propagation route  -  Propagation speed
  Classification code:421 Strength of Building Materials; Mechanical Properties  -  481 Geology and Geophysics  -  804.1 Organic Compounds  -  921 Mathematics  -  931 Classical Physics; Quantum Theory; Relativity
  DOI:10.6041/j.issn.1000-1298.2012.12.014
  Database:Compendex

29. Accession number:20130315915023
  Title:Parameters optimization of combined spiral bar tooth thresher for maize seed
  Authors:Zhao, Wuyun1, 2 ; Guo, Kangquan1  
  Author affiliation:1  College of Mechanical and Electronic Engineering, Northwest A and F University, Yangling, Shaanxi 712100, China
                 2  School of Engineering, Gansu Agricultural University, Lanzhou 730070, China
  Corresponding author:Guo, K. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:56-61
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to obtain the best working parameters combination of spiral bar tooth thresher for maize seed production, parameters such as feed rates, threshing rotation speed of roller, spiral angle of bar tooth and exhaust core mouth clamp pressure were selected as independent variables, which would influence kernel broken rate of maize seed. Subsequently, the Box-Behnken experimental design with four factors and three levels was performed, and the mathematical model was established by using Design-Expert software. Then the effects of various parameters and their interactions were analyzed as well. The results showed that effects order of four parameters on kernel broken rate of maize seed were as follows: spiral angle of bar tooth, threshing rotation speed of roller, feed rates and exhaust core mouth clamp pressure. The optimal working parameters were feed rates of 2.8 kg/s, threshing rotation speed of roller of 241 r/min, spiral angle of bar tooth of 9°and exhaust core mouth clamp pressure of 40 N, then the kernel broken rate of seed production of 0.366% was obtained, which was reduced by 0.084%~0.274% after the parameters optimization.
  Number of references:11
  Main heading:Optimization
  Controlled terms:Agriculture  -  Mathematical models  -  Rollers (machine components)
  Uncontrolled terms:Box-Behnken experimental design  -  Clamp pressure  -  Design-expert  -  Feed-rates  -  Independent variables  -  Maize seeds  -  Parameters optimization  -  Response surface method  -  Rotation speed  -  Seed production   -  Spiral angle  -  Thresher, Combined type of spiral bar tooth  -  Working parameters
  Classification code:601.2 Machine Components  -  821 Agricultural Equipment and Methods; Vegetation and Pest Control  -  921 Mathematics  -  921.5 Optimization Techniques
  DOI:10.6041/j.issn.1000-1298.2012.12.011
  Database:Compendex

30. Accession number:20130415916052
  Title:Development of technology and equipment of corn harvester in China
  Authors:Chen, Zhi1 ; Hao, Fuping2 ; Wang, Fengde1 ; Su, Wenfeng1 ; Cui, Junwei2 
  Author affiliation:1  China National Machinery Industry Corporation, Beijing 100080, China
                 2  Chinese Academy of Agricultural Mechanization Sciences, Beijing 100083, China
  Corresponding author:Chen, Z. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:44-50
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The differences of corn planting-harvesting process and harvesting equipment between China and developed countries, corn harvester developing process and major model were introduced. The general technology and equipment of snapping, husking and straw treatment of corn harvesting machine, and the research and exploration of corn harvesting technology regardless of row in China were expatiated. The major factor for restricting development of corn harvest mechanization in China, the development trend of foreign corn harvester, and planting and harvesting characteristics of Chinese corn producing areas were analyzed. Finally, it pointed out that the corn harvester should be designed with combination of agricultural machinery and technology to suit local condition in China.
  Number of references:29
  Main heading:Harvesting
  Controlled terms:Equipment  -  Harvesters  -  Technology
  Uncontrolled terms:Corn  -  Corn harvesters  -  Developed countries  -  Developing process  -  Development  -  Development trends  -  Harvesting machines  -  Local conditions  -  Major factors
  Classification code:821.1 Agricultural Machinery and Equipment  -  821.3 Agricultural Methods  -  901 Engineering Profession
  DOI:10.6041/j.issn.1000-1298.2012.12.009
  Database:Compendex

31. Accession number:20130315915047
  Title:Detection of trashes in combed cotton using hyper-spectral images
  Authors:Guo, Junxian1 ; Ying, Yibin2 ; Rao, Xiuqin2 ; Li, Junwei1 ; Kang, Yinxia1 ; Shi, Zhai1 
  Author affiliation:1  Mechanical and Traffic College, Xinjiang Agricultural University, Urumqi 830052, China
                 2  College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou 310029, China
  Corresponding author:Rao, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:197-203
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:This research focused on the detection of trashes at the depth of 1~6 mm in the cotton using hyper-spectral imaging and pixels classification. In the wavelength range of 460~900 nm, the detection algorithms were developed based on pixel's spectra of hyper-spectral image, pixel classification by quadratic discriminate analysis, and binary images post-processing by combining area filter with morphologic process. The results indicated that hyper-spectral imaging was able to detect some trashes at certain depths in the cotton, such as natural trashes, color polypropylene fibers, color yarn and fragments of cloth. And it also can detect some black hair and gray polypropylene fibers. In particular, the detection effect for natural trashes was the best. The detection rates for natural trashes were over 80%.
  Number of references:18
  Main heading:Spectroscopy
  Controlled terms:Cotton  -  Error detection  -  Pixels  -  Polypropylenes  -  Thermoplastics
  Uncontrolled terms:Detection algorithm  -  Detection effect  -  Detection rates  -  Discriminate analysis  -  Foreign materials  -  Hyper-spectral images  -  Hyperspectral Imaging  -  Pixel classification  -  Polypropylene fiber  -  Post processing   -  Trashes  -  Wavelength ranges
  Classification code:721.1 Computer Theory, Includes Formal Logic, Automata Theory, Switching Theory, Programming Theory  -  723.5 Computer Applications  -  801 Chemistry  -  815.1.1 Organic Polymers  -  819.1 Natural Fibers
  DOI:10.6041/j.issn.1000-1298.2012.12.036
  Database:Compendex

32. Accession number:20130315915045
  Title:Landmark direction angle for omnidirectional vision localization system
  Authors:Li, Ming1, 2 ; Imou, Kenji3 ; Liu, Zhonghua1 ; Mo, Yawu2 ; Wu, Bin2 
  Author affiliation:1  National Research Center of Engineering Technology for Functional Ingredients from Botanical, Changsha 410128, China
                 2  College of Engineering, Hunan Agricultural University, Changsha 410128, China
                 3  Biological and Environmental Mechanism Lab., The University of Tokyo, Tokyo 113-8657, Japan
  Corresponding author:Li, M. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:181-186
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The position accuracy is mainly decided by the accuracy of landmark directional angle for the localization system of agricultural machinery based on omnidirectional vision sensor. The algorithms about low pass filter eliminating noise and artificial landmark features detection was studied. After eliminating noise, the red pixels' intensity was calculated and the red landmark pixels beyond the threshold were extracted. Based on the Euclid geometrical distance of neighbor pixels, the small area of pixels was divided and the center of gravity was calculated for the extracted small area representing the candidate of one landmark. The algorithm provided the blue patch as compensation to further distinguish the landmark from other objects in a complex environment. The landmark detection test proved that the low pass filter eliminating noise was effective. Pointing, straightaway driving and tilt tests were conducted on the level ground in a 30 m×30 m area outside. Results showed that the average values of MAE and RMSE of landmark direction angles were 1.12° and 2.10°, and the influence of vehicle vibration and tilt angle less than 5° were not obvious. The positioning accuracy was about 10 cm. The proposed algorithm is feasible, the error of landmark direction angle is less and the program is fast running speed and robustness.
  Number of references:20
  Main heading:Pixels
  Controlled terms:Agricultural machinery  -  Algorithms  -  Image processing  -  Sensors  -  Tracking (position)  -  Vibrations (mechanical)
  Uncontrolled terms:Artificial landmark  -  Average values  -  Center of gravity  -  Complex environments  -  Direction angle  -  Eliminating noise  -  Landmark detection  -  Localization system  -  Omni-directional vision  -  Omnidirectional vision sensor   -  Position accuracy  -  Positioning accuracy  -  Running speed  -  Small area  -  Tilt angle  -  Vehicle vibrations
  Classification code:921 Mathematics  -  821.1 Agricultural Machinery and Equipment  -  801 Chemistry  -  931.1 Mechanics  -  741 Light, Optics and Optical Devices  -  723 Computer Software, Data Handling and Applications  -  716.2 Radar Systems and Equipment  -  723.5 Computer Applications
  DOI:10.6041/j.issn.1000-1298.2012.12.033
  Database:Compendex

33. Accession number:20130315915022
  Title:Design of no-tillage maize planter with straw smashing and fertilizing
  Authors:Zhang, Junchang1 ; Yan, Xiaoli1 ; Xue, Shaoping1 ; Zhu, Ruixiang1 ; Su, Guangyuan2 
  Author affiliation:1  College of Mechanical and Electronic Engineering, Northwest A and F University, Yangling, Shaanxi 712100, China
                 2  Identification of Shaanxi Agricultural Machinery Station, Xi'an 710065, China
  Corresponding author:Yan, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:51-55
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:2BMQ-180/3 type no-tillage maize planter with stalk mulch smashing and fertilizing was developed. The anti-blockage measures when using the smashing straw endings machine-driven by vertical shaft rotary to smash the straw and weeds and throw them on the surface of the fields before the opener to plough the ditch was put forward. Then, the machine's work performance was tested. The results showed that the planter performed very well. Its variation coefficients of sowing fertilizer cover depth were 23.7% and 20.8%. The smashed stalk length was less than 10 cm which was up to more than 90%. The germination rate was more than 90%. This improved the germinative rate of the seeds and achieved the joint practices model of smashing the straw and no-tillage sowing. The model also meets the requirements of conservation tillage technology in the area.
  Number of references:11
  Main heading:Cultivation
  Controlled terms:Design  -  Soil conservation
  Uncontrolled terms:Anti-blockage  -  Conservation tillage  -  Cover depth  -  Germination rates  -  No tillage  -  Stalk smashing  -  Variation coefficient  -  Vertical shaft  -  Work performance
  Classification code:408 Structural Design  -  821.3 Agricultural Methods
  DOI:10.6041/j.issn.1000-1298.2012.12.010
  Database:Compendex

34. Accession number:20130315915041
  Title:Combined effect of CO2 and cold seawater maintain quality of pacific white shrimp
  Authors:Liu, Shulai1 ; Zhang, Shasha1 ; Lü, Fei1 ; Ding, Yuting1  
  Author affiliation:1  College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310014, China
  Corresponding author:Ding, Y. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:158-164
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The combined effects of CO2 and cold seawater on the quality of Pacific white shrimp (Penaeus vanmamei) during the storage were investigated. The results showed that the total bacterial count (TBC), Escherichia coli count, H2S-producing bacteria count and psychrophilic bacteria count of shrimp preserved in CO2-cold seawater (4°C) were lower than that of control group (samples were not in CO2-cold seawater but cold stroge). As a result, total volatile basic nitrogen (TVB-N), pH value and K value increased more slowly than that of control during storage. Shrimp in CO2-cold seawater was second-grade freshness (TVB-N value of 19.5 mg/(100 g), K value of 20.3%) after storage eight days comparing to serious spoilage of control. The shear force of shrimp flesh decreased slowly during storage, but there was no obvious difference. Activity of polyphenol-oxidase (PPO) was significantly inhibited by CO2-cold seawater. Meanwhile, melanosis of shrimp and deterioration of sense quality was delayed.
  Number of references:25
  Main heading:Carbon dioxide
  Controlled terms:Bacteria  -  Escherichia coli  -  Seawater effects  -  Shellfish  -  Wood preservation
  Uncontrolled terms:Basic nitrogen  -  Combined effect  -  Control groups  -  K-values  -  Pacific white shrimp  -  pH value  -  Psychrophilic bacteria  -  Shear force  -  Total bacterial count
  Classification code:461.9 Biology  -  471.4 Seawater, Tides and Waves  -  803 Chemical Agents and Basic Industrial Chemicals  -  804.2 Inorganic Compounds
  DOI:10.6041/j.issn.1000-1298.2012.12.029
  Database:Compendex

35. Accession number:20130315915038
  Title:Discriminant analysis of fish meal and soybean meal using sample-sample 2-D correlation near-infrared spectroscopy
  Authors:Lü, Chengxu1 ; Chen, Longjian1 ; Yang, Zengling1 ; Han, Lujia1, 2  
  Author affiliation:1  College of Engineering, China Agricultural University, Beijing 100083, China
                 2  State Key Laboratory of Animal Nutrition, China Agricultural University, Beijing 100091, China
  Corresponding author:Han, L. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:141-145
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to investigate the feasibility of sample-sample 2-D correlation near infrared diffuse reflectance spectroscopy method for different protein feeds rapid identification, 52 fish meal samples and 60 soybean meal samples were collected, including 74 calibration samples and 38 independent validation samples. Samples were measured by spectrometer. Calibration model was established by sample-sample 2-D correlation spectroscopy method with the pretreatment of 3-point first derivative. This method performed 100% of correctly classified samples. Compared with partial least squares discriminant analysis method, both of them can correctly identify the fish meal and soybean meal. But the sample-sample 2-D correlation spectroscopy method is fast for calculation.
  Number of references:13
  Main heading:Oilseeds
  Controlled terms:Calibration  -  Discriminant analysis  -  Near infrared spectroscopy  -  Spectrometers  -  Spectroscopic analysis
  Uncontrolled terms:Calibration model  -  Calibration samples  -  Correlation spectroscopy  -  Discriminant  -  First derivative  -  Fish meal  -  Near infrared diffuse reflectance  -  Partial least squares-discriminant analysis  -  Pre-Treatment  -  Rapid identification   -  Soybean meal
  Classification code:944 Moisture, Pressure and Temperature, and Radiation Measuring Instruments  -  943 Mechanical and Miscellaneous Measuring Instruments  -  942 Electric and Electronic Measuring Instruments  -  941 Acoustical and Optical Measuring Instruments  -  922 Statistical Methods  -  821.4 Agricultural Products  -  801 Chemistry
  DOI:10.6041/j.issn.1000-1298.2012.12.026
  Database:Compendex

36. Accession number:20130415916053
  Title:Image fusion algorithm based on improved nonsubsampled contourlet
  Authors:Feng, Xin1 ; Wang, Xiaoming1 ; Dang, Jianwu2 ; Shen, Yu2 
  Author affiliation:1  College of Electric Engineering and Information Engineering, Lanzhou University of Technology, Lanzhou 730050, China
                 2  School of Electronic and Information Engineering, Lanzhou Jiaotong University, Lanzhou 730050, China
  Corresponding author:Wang, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:192-196 164
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to solve the problem that the infrared light sensor and the visible light sensor can't get clear images simultaneously, a nonsubsampled Contourlet coefficient compressive sensing based on infrared and visible image fusion method was proposed. Firstly, the nonsubsampled Contourlet transformation method was used to do multiscale multi directional image decomposition for the infrared and visible image. Each nonsubsampled Contourlet coefficient of them was got. Then, the low-frequency coefficients of the infrared and visible image were fused by the weighted average fusion method. The band-pass sub-band coefficients by the pseudo-random Fourier matrix observations weights fusion method were used. After that, fused band-pass sub-band coefficients were reconstructed. Finally, image by the inverse nonsubsampled Contourlet transformation were reconstructed. The experiment results showed that this fusion algorithm can get image with clear object and background, and it has the low computational complexity and good fusion effect.
  Number of references:16
  Main heading:Image fusion
  Controlled terms:Algorithms  -  Light  -  Sensors  -  Signal reconstruction
  Uncontrolled terms:Compressive sensing  -  Fusion image  -  Infrared light  -  Nonsubsampled contourlet  -  Visible light
  Classification code:716.1 Information Theory and Signal Processing  -  723 Computer Software, Data Handling and Applications  -  723.2 Data Processing and Image Processing  -  741.1 Light/Optics  -  801 Chemistry  -  921 Mathematics
  DOI:10.6041/j.issn.1000-1298.2012.12.035
  Database:Compendex

37. Accession number:20130315915043
  Title:Obstacle-avoidance path planning of robot arm for tomato-picking robot
  Authors:Yin, Jianjun1 ; Wu, Chuanyu2 ; Yang Simon X, Simon X3 ; Mittal Gauri S, Gauri S3 ; Mao, Hanping1 
  Author affiliation:1  Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University, Zhenjiang 212013, China
                 2  School of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, Hangzhou 310018, China
                 3  School of Engineering, University of Guelph, Guelph N1G 2W1, Canada
  Corresponding author:Yin, J. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:171-175
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:It is chosen as research object that joint robot arm avoids erect stem or strut to pick tomatoes, and a kind of obstacle-avoidance path planning method based on configuration space of joint robot arm was presented. Space mapping principle was used to transform obstacle-avoidance problem of joint robot arm in 3-D workspace into avoiding obstacle circle problem of planar R-R robot arm. Critical collision joint angle was used to build up mapping computation models of configuration obstacle space of planar R-R robot arm, and obstacle-avoidance position computation of joint robot arm in 3-D workspace was transformed into joint angles computation of linkages in configuration space. After terminal joint angles of obstacle-avoidance path planning were optimized according to optimal energy function, the obstacle-avoidance joint angle path of planar R-R robot arm based on A* arithmetic was computed. A series of intersectant erect planes described space link position were obtained and the planning of other joint was carried out in the intersectant erect planes. The test of avoiding erect obstacle to pick tomatoes showed that joint robot arm carried with the gripper can move round linear obstacle and guide the gripper to reach object position. The test proved that mapping computation models of configuration obstacle space of planar R-R robot arm were correct. It validated that the obstacle-avoidance path planning method was feasible and may be applied into automatic harvesting of tomato.
  Number of references:11
  Main heading:Motion planning
  Controlled terms:Collision avoidance  -  Fruits  -  Grippers  -  Optimization  -  Robotic arms  -  Wave functions
  Uncontrolled terms:3-D workspace  -  Avoiding obstacle  -  Computation model  -  Configuration space  -  Joint angle  -  Object positions  -  Optimal energy  -  Path planning method  -  Picking robot  -  Research object   -  Robot arms  -  Space link  -  Space mappings  -  Tomato
  Classification code:931 Classical Physics; Quantum Theory; Relativity  -  921.5 Optimization Techniques  -  921 Mathematics  -  914.1 Accidents and Accident Prevention  -  821.4 Agricultural Products  -  731.5 Robotics  -  711 Electromagnetic Waves
  DOI:10.6041/j.issn.1000-1298.2012.12.031
  Database:Compendex

38. Accession number:20130315915060
  Title:Constitutive model of physical simulation in high speed cutting for Al6061-T6
  Authors:Xu, Daochun1 ; Feng, Pingfa2 ; Yu, Dingwen2 ; Wu, Zhijun2 
  Author affiliation:1  School of Technology, Beijing Forestry University, Beijing 100083, China
                 2 Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China
  Corresponding author:Xu, D. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:273-277
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The quasi-static and dynamic mechanical properties experiment of Al6061-T6 in high temperature (20~500°C) and high strain rate (up to 104/s) was carried out on the quasi-static press and split Hopkinson press bar (SHPB) equipment. Then the effect curves of strain hardening, strain rate strengthening and thermal softening were obtained. According to these curves, the classic JC (Johnson-Cook) equation was modified. Furthermore, the modified JC equation was validated in the high speed cutting physical simulation model. The results showed that the Al6061-T6 flow stress increased with the increasing of strain and strain rate, and obviously decreased with the increasing of deformation temperature. The description accuracy of the modified JC equation was higher than the JC equation. The obtained Al6061-T6 constitutive equation can provide important material parameters for physical simulation models of its high speed machining process.
  Number of references:12
  Main heading:Strain rate
  Controlled terms:Computer simulation  -  Mechanical properties  -  Presses (machine tools)  -  Strain hardening
  Uncontrolled terms:Deformation temperatures  -  Dynamic mechanical property  -  High speed cutting  -  High speed machining  -  High strain rates  -  High temperature  -  Johnson-Cook  -  Material parameter  -  Physical simulation  -  Physical simulation model   -  Quasi-static  -  SHPB  -  Split-Hopkinson  -  Strain and strain rates  -  Thermal softening
  Classification code:421 Strength of Building Materials; Mechanical Properties  -  422 Strength of Building Materials; Test Equipment and Methods  -  537.1 Heat Treatment Processes  -  603.1 Machine Tools, General  -  723.5 Computer Applications  -  951 Materials Science
  DOI:10.6041/j.issn.1000-1298.2012.12.049
  Database:Compendex

39. Accession number:20130315915050
  Title:Plant stress recognition based on fuzzy-rule using optimal wavelet packet
  Authors:Lu, Jingxia1 ; Ding, Weimin1 ; Yu, Haiming1 ; Ling, Weilong1 
  Author affiliation:1  Key Laboratory of Intelligent Agricultural Equipment in Jiangsu Province, Nanjing Agricultural University, Nanjing 210031, China
  Corresponding author:Ding, W. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:217-221 228
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to correctly identify common stress types of plants, because the wavelet packet has superior ability in feature extraction, the way to optimize the wavelet packet decomposition by use of the fuzzy criterion was proposed. Then BP neural network classifier should be employed to distinguish different stress factors according to physical characteristics of electrical signals performed by plants under diverse stress factors. Because plant electrical signals are very weak, de-noising method based on wavelet packet was used. Afterwards, after wavelet packet was optimized by fuzzy criterion to acquire the feature sets composed of optimal wavelet packet base energy values which can be differentiated easily, electrical signals from plants exposed to a variety of stress types were decomposed by using wavelet packet. In the end, the feature sets were input to a certain BP neural network which is more suited for processing fuzzy and nonlinear signals to finally identify stress types. The results of the study showed that average rate reached to 95.95%. This proposal was proved to be relatively precise and practical after the analysis of four plants including aloe, Jasper, Sansevieria and Schlumbergera, all of which were exposed to seven kinds of detrimental factors.
  Number of references:18
  Main heading:Optimization
  Controlled terms:Factor analysis  -  Feature extraction  -  Neural networks  -  Quartz  -  Wavelet analysis
  Uncontrolled terms:Electrical signal  -  Energy characteristics  -  Optimal wavelets  -  Plant  -  Stress factors
  Classification code:482.2 Minerals  -  716 Telecommunication; Radar, Radio and Television  -  723.4 Artificial Intelligence  -  921 Mathematics  -  921.5 Optimization Techniques  -  922.2 Mathematical Statistics
  DOI:10.6041/j.issn.1000-1298.2012.12.039
  Database:Compendex

40. Accession number:20130315915042
  Title:Identification and location system of multi-operation apple robot based on vision combination
  Authors:Wang, Hui1 ; Mao, Wenhua1 ; Liu, Gang2 ; Hu, Xiaoan1 ; Li, Shujun1  
  Author affiliation:1  Chinese Academy of Agricultural Mechanization Sciences, Beijing 100083, China
                 2  Collgeg of Information and Electrical Engineering, China Agricultural University, Beijing 100083, China
  Corresponding author:Li, S. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:165-170
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to improve orchard automation, an identification and location system of apple picking robot was developed. In order to overcome dependence of existing system on the working distance, human picking process using a web camera and a Kinect sensor was imitated. Compared with manual measurements after calibration, the standard deviation of binocular vision in three directions were 3.4 cm, 1.2 cm and 1.2 cm, respectively. An apple detection and location method was developed based on color, shape and position. The results showed that when the working distance was about 240 cm, the mature apples can still be accurately identified and located, the standard deviation of binocular vision in depth direction was 4.9 cm. When the working distance was about 150 cm, the standard deviation of binocular vision in depth direction was 2.4 cm. When the working distance was less than 100 cm, the standard deviation in depth direction was less than 1.0 cm with web camera.
  Number of references:29
  Main heading:Computer vision
  Controlled terms:Binocular vision  -  Cameras  -  Fruits  -  Identification (control systems)  -  Location  -  Robots  -  Statistics
  Uncontrolled terms:Apple  -  Existing systems  -  Location method  -  Location systems  -  Multi-Operation  -  Picking robot  -  Standard deviation  -  Web camera  -  Working distances
  Classification code:922.2 Mathematical Statistics  -  912 Industrial Engineering and Management  -  911 Cost and Value Engineering; Industrial Economics  -  821.4 Agricultural Products  -  742.2 Photographic Equipment  -  741.2 Vision  -  731 Automatic Control Principles and Applications
  DOI:10.6041/j.issn.1000-1298.2012.12.030
  Database:Compendex

41. Accession number:20130315915033
  Title:Design and experiment of automatic flushing basin of biogas digester
  Authors:Luo, Tao1 ; Chen, Chuang1 ; Mei, Zili1 ; Han, Zhiyong1 ; Li, Shulan1 
  Author affiliation:1  Biogas Engineering Research Center, Biogas Institute of Ministry of Agriculture, Chengdu 610041, China
  Corresponding author:Mei, Z. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:114-117 50
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:Taking the physical model of cylindrical biogas digester as the research project to design automatic flushing basin of biogas digester, the flow of the digester was rotated by designing feed pipe to be tangential. Fluent was used to analyze the process. It was found that the grit deposition area that was on lower left bottom. Based on the theory of hydraulic similarity, the design digester and the conventional digester were established. The angle between grit discharge pipe and feed pipe was designed for 150° according to the sedimentation law. Water was used as experiment fluid, whose sand contents were 10%. The results showed that sand would be collected at the 3rd discharging at design digester, the grit removal rate was up to 86.13% at the 5th, the average grit removal rate for 19 times was 3.81 times of the conventional, and the average of the 5th to 22nd was 82.17%. The grit removal result of conventional was exceeded by the design.
  Number of references:17
  Main heading:Design
  Controlled terms:Biogas  -  Experiments  -  Rotational flow
  Uncontrolled terms:Automatic flushing  -  Biogas digesters  -  Grit discharge  -  Grit-removal  -  Physical model  -  Sand content
  Classification code:408 Structural Design  -  522 Gas Fuels  -  631.1 Fluid Flow, General  -  901.3 Engineering Research
  DOI:10.6041/j.issn.1000-1298.2012.12.021
  Database:Compendex

42. Accession number:20130315915054
  Title:Characteristics of electromagnet with high pressure resistance for valve
  Authors:Meng, Bin1 ; Ruan, Jian1 ; Li, Sheng1 
  Author affiliation:1  Key Laboratory of Special Purpose Equipment and Advanced Processing Technology, Ministry of Education, Zhejiang University of Technology, Hangzhou 310014, China
  Corresponding author:Ruan, J. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:240-245 256
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A rotary electromagnet with high pressure resistance based on axial stator division structure was proposed. Combined with the approaches of magnetic circuit analysis, numerical simulation and experimental study, the static and dynamic characteristics of electromagnet including torque-angle relationship, frequency response and step response were studied. The simulated frequency width was 115 Hz/-3 dB, 80 Hz/-90° approximately and the simulated rise time for step response was about 15 ms. In order to validate the accuracy of theoretical results, a special test rig was built and experimental study was performed. The electromagnet has sinusoidal-like torque-angle characteristics whose maximum static torque reached about 0.19 N·m. And its experimental frequency width was 113 Hz/-3 dB, 65 Hz/-90° approximately and experimental rise time was about 18 ms. The experimental results were in a close agreement with the simulated results. The electromagnet was appropriate to be used as the electro-mechanical converter of 2-D direct-drive digital proportional valve.
  Number of references:12
  Main heading:Electromagnets
  Controlled terms:Electric network analysis  -  Electromechanical devices  -  Frequency response  -  Magnetic circuits  -  Valves (mechanical)
  Uncontrolled terms:Characteristics  -  Direct drive  -  Electro-mechanical  -  Experimental frequencies  -  Experimental studies  -  High pressure resistance  -  Proportional valves  -  Risetimes  -  Simulated results  -  Static and dynamic   -  Static torque  -  Test rigs  -  Theoretical result
  Classification code:601.2 Machine Components  -  701.2 Magnetism: Basic Concepts and Phenomena  -  703.1 Electric Networks  -  703.1.1 Electric Network Analysis  -  704.1 Electric Components
  DOI:10.6041/j.issn.1000-1298.2012.12.043
  Database:Compendex

43. Accession number:20130315915055
  Title:Design of piezoelectric resonant diaphragm air pump
  Authors:Xie, Haifeng1 ; Jie, Meng1, 2 ; Kang, Xiaotao3 ; Yang, Zhigang1 ; Wang, Long4 
  Author affiliation:1  Institute of Mechanical Science and Engineering, Jilin University, Changchun 130025, China
                  2  College of Machinery and Electricity Engineering, Jilin Institute of Chemical Technology, Jilin 132022, China
                  3  College of Communication Engineering, Jilin University, Changchun 130025, China
                  4  Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130025, China
  Corresponding author:Yang, Z. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:246-250
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A kind of piezoelectric resonant diaphragm air pump was proposed, which is based on the system resonant principle. Firstly, the working principle of the piezoelectric resonant diaphragm air pump was analyzed and a dynamic model of the pump resonance was established. The main factors of the output flow rate can be obtained. Then a prototype was designed. The testing facility was developed to measure the volume of the resonance pump. Finally, the variation of output flow rate on different vibrating spring rate, adjusting spring rate and diaphragm rate were obtained by experiment test. Experimental results indicated that the maximum flow rate was 1 650 mL/min when he sinusoidal AC driving voltage was 150 V, the vibrating spring thickness was 0.6 mm, the adjusting spring thickness was 1.4 mm, and the radius ratio of the rigidity transfer vibration piston and the diaphragm was 0.5. And the amplification factor of the piezoelectric vibrator was 5.3 by using the proposed photovoltaic displacement sensor.
  Number of references:17
  Main heading:Diaphragms
  Controlled terms:Piezoelectricity  -  Vibrators
  Uncontrolled terms:Ac-driving  -  Air pumps  -  Amplification factors  -  Displacement sensor  -  Experiment tests  -  Maximum flow rate  -  Output flow rate  -  Photovoltaic  -  Piezoelectric vibrators  -  Radius ratio   -  Resonant  -  Resonant diaphragms  -  Spring rate  -  Testing facility  -  Working principles
  Classification code:601.1 Mechanical Devices  -  601.2 Machine Components  -  701.1 Electricity: Basic Concepts and Phenomena
  DOI:10.6041/j.issn.1000-1298.2012.12.044
  Database:Compendex

44. Accession number:20130315915016
  Title:Fuzzy hybrid control strategy of semi-active suspensions for vehicle
  Authors:Yan, Tianyi1 ; Ren, Kunru1 ; Wang, Yulin1 ; Zhang, Luzou1 
  Author affiliation:1  College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
  Corresponding author:Yan, T. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:11-15 27
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:A half-car model of semi-active suspension systems with 4-DOF was established. An innovative fuzzy hybrid control strategy considering both ride quality and road-friendliness was developed. For deeply verifying the application of the proposed control strategy in real vehicles, a platform of hardware-in-the-loop was built for evaluating the proposed control strategy of semi-active suspension systems using a self-designed electronic control unit based on Freescale MC9S12XDP512 microcontroller and Matlab/Real-time Windows Target toolbox. A series of hardware-in-the-loop simulation were conducted by using the platform. It showed that compared with skyhook control strategy and groundhook control strategy, HIL-based fuzzy hybrid control strategy can make a balance between vehicle ride and road-friendly and had the application feasibility.
  Number of references:11
  Main heading:Suspensions (components)
  Controlled terms:Active suspension systems  -  Hardware  -  Model automobiles  -  Roads and streets  -  Telecommunication networks  -  Vehicles
  Uncontrolled terms:Application feasibility  -  Control strategies  -  Electronic control units  -  Freescale  -  Half-car model  -  Hard-ware-in-the-loop  -  Hardware in-the-loop simulation  -  Hybrid control strategies  -  Real vehicles  -  Ride quality   -  Road-friendliness  -  Semi active suspension  -  Skyhook control  -  Vehicle ride
  Classification code:717 Optical Communication  -  716 Telecommunication; Radar, Radio and Television  -  662.1 Automobiles  -  718 Telephone Systems and Related Technologies; Line Communications  -  605 Small Tools and Hardware  -  432 Highway Transportation  -  406.2 Roads and Streets  -  601.2 Machine Components
  DOI:10.6041/j.issn.1000-1298.2012.12.003
  Database:Compendex

45. Accession number:20130315915048
  Title:Detailed modeling of 3-D configuration of tomato plant
  Authors:Yuan, Xiaomin1 ; Zhao, Chunjiang1 ; Wen, Weiliang1 ; Guo, Xinyu1 ; Lu, Shenglian1 ; Wei, Xueli1 
  Author affiliation:1  National Engineering Research Center for Information Technology in Agriculture, Beijing 100097, China
  Corresponding author:Zhao, C. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:204-210
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to provide techniques for digital design of the 3-D shape and visual simulating of tomato, on the foundation of observation, measurement and analysis of long term on tomato, the classification modeling of configuration of leaves and lateral branches was put forward based on measured data. Leaves and lateral branches were classified, and template libraries were constituted, which contains 2~4 temples respectively. Several principal control parameters with explicit biological background for these geometric models of organs were extracted based on the morphological features of tomato. Interactive designing the 3-D shape and organs of tomato were implemented by using template techniques. The models designed by this method, which presented polymorphism and have high realistic, could be integrated with agricultural knowledge easily. An interactive design software based on geometric model of tomato organs was exploited, by which users can design tomato plant model interactively. The digital model appears polymorphism, and ratios of model and real plant that the vertical projection leaf area and total leaf area were compared, they were 0.478 8 and 0.483 2, respectively, the error between them was 0.91%, so it has a high sense of reality.
  Number of references:20
  Main heading:Three dimensional
  Controlled terms:Biological organs  -  Design  -  Fruits  -  Geometry  -  Plants (botany)
  Uncontrolled terms:3-D shape  -  Can design  -  Control parameters  -  Detailed modeling  -  Digital designs  -  Digital model  -  Geometric models  -  Interactive design  -  Leaf area  -  Measurement and analysis   -  Morphological features  -  Template libraries  -  Template technique  -  Tomato  -  Tomato plants  -  Total leaf area  -  Vertical projection
  Classification code:408 Structural Design  -  461.2 Biological Materials and Tissue Engineering  -  461.9 Biology  -  821.4 Agricultural Products  -  902.1 Engineering Graphics  -  921 Mathematics
  DOI:10.6041/j.issn.1000-1298.2012.12.037
  Database:Compendex

46. Accession number:20130315915040
  Title:Microstructure and pasting characteristics of wheat germ treated by microwave radiation
  Authors:Xu, Bin1 ; Zhou, Shilong1 ; Miao, Wenjuan1 ; Dong, Ying1  
  Author affiliation:1  School of Food and Biological Engineering, Jiangsu University, Zhenjiang 212013, China
  Corresponding author:Dong, Y. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:151-157
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to study the impact of microwave radiation on wheat germ (WG) quality, a continuous microwave radiation system was constructed. Scanning electron microscopy and micro-viscometer were used to detect the influence of microwave radiation on microstructure and starch pasting characteristics of WG. The results showed that the continuous microwave radiation system had a good stabilization effect on WG. The majority starch granules in microwave-treated WG were still intact observed by SEM, accompanied by a clear outline. However, with the microwave radiation intensity increased, the original spatial structure changed among starch granule, oil and protein. The gelatinization temperature of microwave treated WG rose to a range of 59.3~65.4°C. Depending on their extent of pre-gelatinization, different WG samples gave significantly different peak viscosity (349~466 BU) and break down values (69~87 BU). Compared with that of raw WG samples, the fatty acids composition and tocopherol content of WG treated by microwave did not change significantly. The above results showed that microwave radiation did have some effect on WG quality, but less than traditional heating methods. Microwave stabilization should have a good prospect for industrial application.
  Number of references:20
  Main heading:Microwaves
  Controlled terms:Gelation  -  Granulation  -  Industrial applications  -  Microstructure  -  Radiation  -  Scanning electron microscopy  -  Stabilization  -  Starch
  Uncontrolled terms:Break down  -  Gelatinization temperature  -  Microwave radiation intensity  -  Pasting characteristics  -  Peak viscosities  -  Spatial structure  -  Stabilization effects  -  Starch granules  -  Starch pasting  -  Tocopherol contents   -  Traditional heating  -  Wheat germ
  Classification code:711 Electromagnetic Waves  -  741.1 Light/Optics  -  802.3 Chemical Operations  -  804.1 Organic Compounds  -  913 Production Planning and Control; Manufacturing  -  951 Materials Science
  DOI:10.6041/j.issn.1000-1298.2012.12.028
  Database:Compendex

47.  Accession number:20130315915028
  Title:Design and test of variable rate application controller of intermittent spray based on PWM
  Authors:Wei, Xinhua1 ; Jiang, Shan2 ; Sun, Hongwei1 ; Xu, Laiqi3 
  Author affiliation:1  Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University, Zhenjiang 212013, China
                 2  School of Electronic and Information Engineering, Hefei Normal University, Hefei 230061, China
                 3  School of Electronic and Information Engineering, Jiangsu University, Zhenjiang 212013, China
  Corresponding author:Wei, X. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:87-93 129
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to implement variable rate application control of intermittent spray based on pulse width modulation (PWM) technology, a blended pulse variable rate application controller was designed with its core part DSP56F805. The controller has two working modes. Operational parameters were set artificially in single mode, and received from upper computer through CAN bus in online mode. The controller can output 12 channels of PWM signal which can be adjusted individually. It also can monitor traveling speed of sprayer, rotational speed of diaphragm pump's input shaft, spray pressure and application flow rates of each boom partition. In addition, the spray pressure can be regulated on-line by predictive control algorithm with proportional relief valve. A variable rate application system was constructed by integration of a modified commercial boom sprayer and the controller, and its performance tests were carried out. Test results showed that the maximal effective frequency of the PWM signal was within 5 Hz, the ratio of flow regulation was more than 10, measuring error was within ±0.1 km/h for the traveling speed, within ±1.5 r/min for the rotational speed, within ±0.01 MPa for the spray pressure and within ±0.05 L/min for the flow rate, and regulating error of the spray pressure was within ±0.01 MPa in a 2 s regulating period.
  Number of references:13
  Main heading:Pulse width modulation
  Controlled terms:Algorithms  -  Controllers  -  Flow rate  -  Modulation
  Uncontrolled terms:Boom sprayer  -  CAN bus  -  Core part  -  Design and tests  -  Diaphragm pumps  -  Flow regulating  -  Flow regulation  -  Intermittent spray  -  Measuring errors  -  Online modes   -  Operational parameters  -  Performance tests  -  Predictive control algorithm  -  Rotational speed  -  Single mode  -  Spray pressure  -  Upper computer  -  Variable rate application  -  Working mode
  Classification code:631 Fluid Flow  -  716 Telecommunication; Radar, Radio and Television  -  723 Computer Software, Data Handling and Applications  -  732.1 Control Equipment  -  921 Mathematics
  DOI:10.6041/j.issn.1000-1298.2012.12.016
  Database:Compendex

48. Accession number:20130315915049
  Title:Combination prediction of incubator for eggs
  Authors:Zhou, Guoxiong1 ; Wu, Shuci1 
  Author affiliation:1  College of Computer Science and Information Technology, Central South University of Forestry and Technology, Changsha 410004, China
  Corresponding author:Zhou, G. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:211-216
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In view of the incubation process which is highly nonlinear, large delay and time-varying and strong coupling, a combination forecasting method based on gray prediction and associative memory neural networks was proposed. Firstly, the gray prediction model and associative memory neural networks were respectively used on prediction for incubator. Then the two sub-models with weighted integration by using the variance-covariance combination forecasting method was combined. The value of the temperature and humidity of incubator could be more accurate and effective. Finally, the results showed the mean square deviation of combination forecasting model was 0.9%.
  Number of references:15
  Main heading:Forecasting
  Controlled terms:Neural networks
  Uncontrolled terms:Associative memory neural networks  -  Combination forecasting  -  Eggs  -  Gray prediction  -  Incubator
  Classification code:723.4 Artificial Intelligence  -  921 Mathematics
  DOI:10.6041/j.issn.1000-1298.2012.12.038
  Database:Compendex

49. Accession number:20130315915021
  Title:Experiment of complex path tracking for excavator working unit
  Authors:Li, Bo1 ; Yan, Jun1 ; Guo, Gang1 ; Tang, Jian1 ; Zhang, Meijun1 
  Author affiliation:1  Engineering Institute of Corps of Engineer, PLA University of Science and Technology, Nanjing 210007, China
  Corresponding author:Yan, J. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:39-43 113
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:In order to control excavator automatically, an excavator was retrofitted with electro-hydraulic proportional control systems. Kinematic models for excavator's mechanism and nonlinear model for its electro-hydraulic system was established respectively. The dead-band and asymmetry nonlinearities of the electro-hydraulic system which was deduced in the theory models was demonstrated by experiments. To satisfy ground-leveling task, a 5-order polynomial was used for path generation in Cartesian space, and the joint-space path was calculated by kinematic models. According to the dead-band and asymmetry nonlinearities of control system, a segment PID controller with dead-band compensation was designed. Comparison experiments demonstrated that segment PID overcame the majority nonlinearities effectively. It had better tracking performance than conventional PID. In conclusion, complex path tracking was achieved by coordinated control of the three working arms.
  Number of references:16
  Main heading:Construction equipment
  Controlled terms:Control nonlinearities  -  Coordination reactions  -  Excavation  -  Excavators  -  Experiments  -  Hydraulic equipment  -  Kinematics  -  Surface discharges
  Uncontrolled terms:Cartesian Space  -  Co-ordinated control  -  Complex path  -  Conventional pid  -  Electro-hydraulic proportional control  -  Electro-hydraulic system  -  Kinematic model  -  Non-linear model  -  Path generation  -  Path tracking   -  PID controllers  -  Theory model  -  Tracking performance  -  Working arm  -  Working unit
  Classification code:901.3 Engineering Research  -  802.2 Chemical Reactions  -  731.1 Control Systems  -  931.1 Mechanics  -  701.1 Electricity: Basic Concepts and Phenomena  -  405.2 Construction Methods  -  405.1 Construction Equipment  -  632.2 Hydraulic Equipment and Machinery
  DOI:10.6041/j.issn.1000-1298.2012.12.008
  Database:Compendex

50. Accession number:20130315915056
  Title:Model of disruption management for machine disruption in single machine scheduling
  Authors:Jiang, Yang1 ; Sun, Wei1 ; Ding, Qiulei2 ; Zhang, Xu1 
  Author affiliation:1  School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China
                 2  School of Business Administration, Dongbei University of Finance and Economics, Dalian 116025, China
  Corresponding author:Jiang, Y. ([email protected]) 
  Source title:Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery
  Abbreviated source title:Nongye Jixie Xuebao
  Volume:43
  Issue:12
  Issue date:December 2012
  Publication year:2012
  Pages:251-256
  Language:Chinese
  ISSN:10001298
  CODEN:NUYCA3
  Document type:Journal article (JA)
  Publisher:Chinese Society of Agricultural Machinery, No. 1 Beishatan Deshengmen Wai, Beijing, 100083, China
  Abstract:The system deviation according to disruption management were measured from the following three aspects: the customer dissatisfaction, operational cost and processing sequence of jobs. Then, the multi-objective model of disruption management based on the lexicographic multiple goal programming was constructed and an improved ant colony optimization was demonstrated. Finally, the effectiveness of model was validated by a case. The computational result proved that, due to the tradeoff between all parties involved in the single machine scheduling, the proposed model was more practical than existed global rescheduling model.
  Number of references:14
  Main heading:Machinery
  Controlled terms:Multiobjective optimization
  Uncontrolled terms:Computational results  -  Customer dissatisfaction  -  Disruption management  -  Goal programming  -  Improved ant colony optimization  -  Multi objective optimizations (MOO)  -  Multiobjective models  -  Single-machine scheduling
  Classification code:601 Mechanical Design  -  921.5 Optimization Techniques
  DOI:10.6041/j.issn.1000-1298.2012.12.045
  Database:Compendex