ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

2TPR&2TPS并聯機器人結構參數辨識
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目(51965029)、云南省重大科技專項計劃項目(202002AC080001)和國家重點研發計劃項目(2018YFB1306103)


Structural Parametric Identification of 2TPR&2TPS Parallel Robot
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    并聯機器人末端位姿精度對其工作性能影響較大,,建立有效的標定算法是提高機器人位姿精度的重要保證,。本文以一種2TPR&2TPS并聯機構為研究對象,首先對機器人進行運動學分析,,采用全微分法得出機器人的誤差模型,,根據該模型得出機器人結構參數誤差與末端位姿誤差的量化關系,以及各誤差項誤差變動對末端位姿誤差的影響規律,;接著,,建立參數辨識模型和標定效果評價函數,驗證了參數辨識模型的有效性,,再用該模型辨識機器人的結構參數誤差,;最后,修正運動學模型完成了機器人的誤差標定,。實驗結果顯示,,標定后機器人的平均位置精度提升68.62%,距離誤差均值由7.710mm降至2.350mm,精度提升69.52%,,實驗結果證明本文的標定算法有效,。

    Abstract:

    The end pose accuracy of parallel robots has a significant impact on their working performance, and establishing effective calibration algorithms is an important guarantee for improving the pose accuracy of robots. A 2TPR&2TPS parallel mechanism was taken as the research object. Firstly, the kinematics of the robot was analyzed, and the error model of the robot was obtained by using the total derivative method. According to the model, the quantitative relationship between the structural parameter error of the robot and the end pose error and the influence law of the error changes of each error item on the end pose error was obtained. Subsequently, a parameter identification model was established based on the improved particle swarm optimization algorithm. The effectiveness of the parameter identification model was verified by setting a set of error values for the identified variables, and comparing the identified values with the set values five times. At the same time, a calibration effect evaluation function was established. Finally, the structural parameter error of the robot was identified with the parameter identification model, and the kinematics model of the robot was modified with the identified error value, and the error calibration of the robot was completed. The calibration effect evaluation function established was used to analyze the calibration effect. The experimental results showed that the average position accuracy of the robot after calibration was improved by 68.62%, and the average distance error was reduced from 7.710mm to 2.350mm, with an accuracy improvement of 69.52%. The experimental results proved that the calibration algorithm was effective.

    參考文獻
    相似文獻
    引證文獻
引用本文

陳明方,何朝銀,張永霞,梁鴻鍵,呂玉波,黃良恩.2TPR&2TPS并聯機器人結構參數辨識[J].農業機械學報,2023,54(10):421-431. CHEN Mingfang, HE Chaoyin, ZHANG Yongxia, LIANG Hongjian, Lü Yubo, HUANG Liang'en. Structural Parametric Identification of 2TPR&2TPS Parallel Robot[J]. Transactions of the Chinese Society for Agricultural Machinery,2023,54(10):421-431.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-06-26
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2023-07-31
  • 出版日期:
文章二維碼