ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

懸掛式割草機折疊機構優化與液壓仿形系統研究
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

工信部2020年苜蓿智能收獲成套裝備項目(TC200H02G)


Optimal Design and Experiment of Folding Mechanism and Hydraulic Profiling System of Hanging Mower
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為了增強割草機在復雜地形條件下的作業能力,開展了割草機折疊機構優化與液壓仿形系統研究,,使折疊機構具備±30°的擺動范圍,,液壓仿形系統可順利通過250mm的凸起路面。通過對折疊機構不同工況的姿態分析以及運動學,、有限元分析,,試制出適用于幅寬3.2m割草機的折疊機構,通過野外試驗驗證了折疊機構具備±30°的擺動范圍,。研制液壓仿形系統,,解決折疊機構剛性連接的問題,通過ADAMS-AMESim聯合仿真技術驗證液壓仿形方案的可行性,,結果表明液壓仿形系統通過250mm波形路面過程中,,蓄能器氣囊體積變化范圍為0.4~0.7L,切割器接地壓力變化范圍為1700~2500N,。將試制的仿形系統搭載在折疊機構上,,在安徽省蕪湖市三山區進行田間試驗,結果表明:樣機能順利完成割草機折疊動作,,滿足各種工況下的力學和強度要求,;切割器具備了±30°以內的擺動范圍;搭載仿形系統的試驗樣機可以順利通過250mm高度的波形凸起路面,,提高了割草機在丘陵山區作業的地形適應能力,,可為懸掛式割草機折疊機構的設計,、割草機接地仿形技術提供參考。

    Abstract:

    In order to solve the problem of forage harvesting in hilly and mountainous areas, the folding mechanism of the hanging large-width lawn mower was optimized, the operation ability of the lawn mower under complex terrain conditions was enhanced, and the operation efficiency of the lawn mower was improved. In order to expand the swing angle range of the folding mechanism, the size requirements of each component were analyzed and calculated under the condition that the folding mechanism can achieve positive and negative swing of 30°. The ADAMS simulation software calculation showed that the maximum pulling force of the hydraulic cylinder of the folding mechanism was 51600N. It was calculated that the maximum stress value of the rotating arm was 216.67MPa, and according to the theoretical calculation results, a folding mechanism suitable for a 3.2m wide lawn mower was trialproduced. Folding mechanism, a matching hydraulic profiling system was developed, the profiling system adopted the method of providing auxiliary oil source for the lifting hydraulic cylinder, and was connected to the accumulator through a check valve and a stop valve at the oil inlet of the hydraulic cylinder. The initial volume of the accumulator was 2.0L, and the pre-charge pressure was 7.0MPa. The ADAMS-AMESim co-simulation technology was used to simulate and analyze the folding mechanism and the profiling system. The volume variation range of the airbag of the cutter was 0.4~0.7L, and the variation range of the ground pressure of the cutter was 1700~2500N. Finally, the trial-produced profiling system was mounted on the folding mechanism, and a field test was carried out in Sanshan District, Wuhu City, Anhui Province. The results showed that the prototype can successfully complete the folding action of the lawn mower and meet the mechanical and strength requirements under various working conditions. The mower had a swing range of ±30°;the test prototype equipped with the profiling system can smoothly pass through the 250mm high wave convex road, which improved the terrain adaptability of the lawn mower in hilly and mountainous areas, and can be used for hanging mowers. It provided a reference for the design of the lawn mower folding mechanism and the grounding profiling technology of the lawn mower.

    參考文獻
    相似文獻
    引證文獻
引用本文

祝露,尤泳,王德成,張楠,馬偉,劉照啟.懸掛式割草機折疊機構優化與液壓仿形系統研究[J].農業機械學報,2022,53(9):122-130. ZHU Lu, YOU Yong, WANG Decheng, ZHANG Nan, MA Wei, LIU Zhaoqi. Optimal Design and Experiment of Folding Mechanism and Hydraulic Profiling System of Hanging Mower[J]. Transactions of the Chinese Society for Agricultural Machinery,2022,53(9):122-130.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2022-04-06
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2022-09-10
  • 出版日期:
文章二維碼