ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

細長果蔬采摘軟體氣動抓手設計與參數優化
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目(51975537)和浙江省基礎公益研究計劃項目(LGN18E050002)


Design and Parameter Optimization of Soft Pneumatic Gripper for Slender Fruits and Vegetables Picking
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為實現細長果蔬的無損采摘,,設計一種充氣呈螺旋運動的軟體氣動抓手,。對該抓手進行有限元靜力學仿真分析,采用3因素3水平的中心組合設計與響應面分析方法,,研究各因素對軟體氣動抓手螺旋特性的交互影響,。以軟體氣動抓手的螺旋直徑和螺距為響應值,分別建立二次回歸模型,,得到模型的決定系數分別為0.9987和0.9351,,各因素對螺旋直徑和螺距的影響顯著性順序從大到小均為:壁厚,、內腔室高度、腔室角,;以軟體氣動抓手的仿真直徑35mm,、仿真螺距[50mm,150mm]為目標函數對各試驗因素進行優化,最優設計結果為壁厚2.51mm,、腔室角30.52°,、內腔室高度11.91mm。制作軟體氣動抓手并進行仿真試驗對比,,結果表明,,螺旋直徑與螺距的誤差均小于5%。對該抓手在不同氣壓下的抓取力進行試驗,,結果顯示,,軟體氣動抓手在氣壓0.13MPa下至少具有3.37N的抓取力;通過抓取不同尺寸,、不同柔軟度細長果蔬的試驗證明了軟體氣動抓手抓取的有效性,;以水果黃瓜為采摘對象,在3.6s內實現了黃瓜的抓取與斷梗,。

    Abstract:

    In order to realize the nondestructive picking of slender fruits and vegetables, a soft pneumatic gripper with aeration and spiral motion was proposed. Based on the finite element static simulation analysis of the gripper, the interaction effect of each factor on the spiral characteristics of the soft pneumatic gripper was studied by using the three-factor and three-level central combination design and response surface analysis method. The quadratic regression model was established with the spiral diameter and pitch of the soft pneumatic grip as the response values, and the determining coefficients of the model were 0.9987 and 0.9351, respectively. The order of significance of the influence of each factor on the spiral diameter and pitch was as follows: wall thickness, cavity width and cavity angle. The simulation diameter of the soft pneumatic gripper was 35mm, and the simulation pitch [50mm,150mm] was taken as the objective function to optimize each influencing factor. The optimal design results were 2.51mm of wall thickness, 30.52° of chamber angle and 11.91mm of chamber height. The results of experiment and simulation showed that the error of screw diameter and pitch was less than 5%. The grasping force of the soft pneumatic gripper was measured under different air pressures, and the results showed that the soft pneumatic gripper had the maximum grasping force of 3.37N at 0.13MPa. Finally, the effectiveness of the soft pneumatic gripper was demonstrated by grasping slender fruits and vegetables of different sizes and softness. Finally, the cucumber was picked as the object, and the cucumber was successfully captured and the stem was broken in 3.6s.

    參考文獻
    相似文獻
    引證文獻
引用本文

賈江鳴,葉玉澤,程培林,胡潤澤,武傳宇.細長果蔬采摘軟體氣動抓手設計與參數優化[J].農業機械學報,2021,52(6):26-34. JIA Jiangming, YE Yuze, CHENG Peilin, HU Runze, WU Chuanyu. Design and Parameter Optimization of Soft Pneumatic Gripper for Slender Fruits and Vegetables Picking[J]. Transactions of the Chinese Society for Agricultural Machinery,2021,52(6):26-34.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2020-12-25
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2021-06-10
  • 出版日期: 2021-06-10
文章二維碼