ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于2D激光探測的立木胸徑幾何算法優化
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

中央高?;究蒲袠I(yè)務費專項資金項目(2015ZCQ—GX—01)和國家林業局引進國際先進林業科學技術計劃(948計劃)項目(2013—4—02)


Optimization of Geometry Algorithm for DBH of Standing Tree on 2D Laser Detection
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    目前林業測繪中使用2D激光掃描儀對樹干立木胸徑及位置的測定研究占據重要地位,。針對3種較為常用的幾何類算法(弧長法,、切線法和雙余弦法),,提出在近距離下利用補償角對其測量值進行補償?shù)姆桨?,研究了弧長法與切線法補償角隨距離的變化關系,,并進行回歸分析,,所得擬合方程的R2均大于0.85,。運用擬合方程在0~5.5m范圍內對實際樹干進行驗證,,試驗選取了5株楊樹樹干,通過算法補償,,半徑與距離測量值的準確性均得到提高,,其中弧長補償算法和切線補償算法對半徑的測量精度分別比未補償前提高了10.6和10.7個百分點,補償后的絕對誤差均值分別為4.8mm和3.8mm,;補償后距離測量值絕對誤差均值可分別控制在66.0mm和15.9mm以內,。試驗證明2種補償后的幾何算法均可作為近距離下的林業測繪算法,,其中切線補償算法更優。

    Abstract:

    It takes an important role to measure the DBH and position of standing tree by a 2D laser detection in current forestry surveying and mapping. A compensation scheme in short distances contraposing the two variables was put forward on three common geometry algorithms (arc length method, tangent method, dual-cosine method), and a compensation angle was used in the scheme. The functionary relation of compensation angles for arc length method and tangent method with distances was researched specifically, the regression analysis was also carried on, and the fitting equations were obtained (R2>0.85 for each fitting equation). Verification test for trunks using the fitting equations in the range of 0~5.5m was carried out in which five poplar trunks were selected. The accuracies of measured values of radius and the distance were all improved by algorithms compensation. Thereinto, the measure precisions of radius values from arc length compensation algorithm and tangent compensation algorithm were respectively increased by 10.6 percent and 10.7 percent, and the mean absolute errors were 4.8mm and 3.8mm; the mean absolute errors of measured values of distance were controlled within 66.0mm and 15.9mm respectively after algorithms compensation. Experiments proved that the two compensation geometric algorithms could both be used as forestry surveying and mapping algorithms in short distances, and the tangent compensation algorithm is better.

    參考文獻
    相似文獻
    引證文獻
引用本文

王亞雄,康峰,李文彬,鄭永軍.基于2D激光探測的立木胸徑幾何算法優化[J].農業機械學報,2016,47(6):290-296. Wang Yaxiong, Kang Feng, Li Wenbin, Zheng Yongjun. Optimization of Geometry Algorithm for DBH of Standing Tree on 2D Laser Detection[J]. Transactions of the Chinese Society for Agricultural Machinery,2016,47(6):290-296.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2016-02-03
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2016-06-10
  • 出版日期: 2016-06-10
文章二維碼