ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

加壓串行流化床制取生物質合成氣的模擬
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點基礎研究發展計劃(973計劃)資助項目(2010CB732206)


Simulation of Bio-syngas Production from Biomass Gasification via Pressurized Interconnected Fluidized Beds
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    利用Aspen Plus軟件建立了加壓串行流化床生物質氣化過程的模型,并將模擬數值與試驗結果相比較,,驗證了模擬研究的可行性,。分別研究了氣化溫度Tg,、氣化壓力pg以及水蒸氣與生物質的質量比(S/B)對生物質合成氣的成分,、氫碳比、氣化份額,、生物質合成氣產率和生物質碳轉化率等的影響,。結果表明氣化溫度、氣化壓力和S/B對生物質氣化過程有很重要的影響,,適當?shù)靥岣邭饣瘻囟群蜌饣瘔毫χ迫∩镔|(zhì)合成氣有利(Tg在800 ℃左右,,pg在0.4MPa左右),合適的S/B在0.4左右,。

    Abstract:

    With Aspen Plus software, the simulation of the whole process of bio-syngas production from gasification via pressurized interconnected fluidized beds was carried out, and the model was validated by the comparison of simulation results and experimental results. The effects of gasification temperature (Tg), gasification pressure (pg) and steam to biomass ratio (S/B) on bio-syngas composition, H2/CO ratio, gasification proportion, bio-syngas yield, and carbon conversion were studied. The results showed that gasification temperature, gasification pressure and S/B had great influences on the biomass gasification process and the suitable gasification temperature and pressure was around 800℃ and 0.4MPa.

    參考文獻
    相似文獻
    引證文獻
引用本文

馮飛,宋國輝,沈來宏,肖軍,張蕾.加壓串行流化床制取生物質合成氣的模擬[J].農業機械學報,2013,44(3):129-136. Feng Fei, Song Guohui, Shen Laihong, Xiao Jun, Zhang Lei. Simulation of Bio-syngas Production from Biomass Gasification via Pressurized Interconnected Fluidized Beds[J]. Transactions of the Chinese Society for Agricultural Machinery,2013,44(3):129-136.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2013-02-25
  • 出版日期:
文章二維碼