ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

泵站開敞式進水池幾何參數的數值模擬
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    基于定常不可壓流體的控制方程和重整化群湍流模型,應用SIMPLEC算法,,計算了不同幾何參數的泵站開敞式進水池定常流動,。研究表明過小的后壁距將引起進水喇叭口的單向進水趨勢,,過大的后壁距將導致后壁產生較大區域的回流區,;過小的懸空高使得流入喇叭口的水流流線過于彎曲,,過大的懸空高將形成喇叭口的單面進水,,導致水泵進口的軸向流速分布不均勻,。研究顯示矩形,、梯形和半圓形進水池水力性能相近,,ω形進水池的水力性能最佳,進水管流速分布均勻,?;跀?shù)值模擬結果提出的進水池主要尺寸參數的范圍和后壁平面形狀,可應用于工程實際,。

    Abstract:

    The open sump is a typical inlet passage of middle and small pumping station. The design parameters of sump affect hydraulic performance of pump. The incompressible N—S equations are solved by the finite volume method. Base on the RNG k—ε model, the SIMPLEC algorithm is applied for the solution of the discretization governing equation. The results illustrate that, excessively small backwall-clearance (T) may lead to unidirectional flow above bellmoth and excessively large T may cause backflows near back wall. It can be observed that curvature of flow near bellmouth appears large while the bottom floor clearance (hc) is too small, but excessively large hc may cause larger head loss and non-uniform axial velocity distribution of blade inlet. The results show that the hydraulic performance of rectangle sump, trapezia sump and semicircle sump are similar, and the best one is ω-shape sump because the distributing flowfield of suction pipe is uniform. The numerical simulation results show that the recommenced parameters brought out and the best plane back wall shape and suitable dimensions of sump presented could be applied in projects.

    參考文獻
    相似文獻
    引證文獻
引用本文

成立,劉超,周濟人,金燕.泵站開敞式進水池幾何參數的數值模擬[J].農業機械學報,2009,40(1):50-55.[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40(1):50-55.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼