玉米種子力學特性的有限元分析

doi:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

首頁 > 過刊瀏覽>2007年第38卷第10期 >64-67. DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

玉米種子力學特性的有限元分析
DOI:
                        10.3969/j.issn.1000-1298.[year].10.[sequence]
                    
CSTR:
                        
                    
作者:
                        
                        
                    
作者單位:
作者簡介:
通訊作者:
中圖分類號:
基金項目:

Author:

Affiliation:

Fund Project:

摘要

圖/表

訪問統計

參考文獻

相似文獻

引證文獻

資源附件

文章評論

摘要:

在建立玉米種子幾何模型與有限元計算模型的基礎上,，通過有限元分析方法對玉米種子在壓載作用下不同作用部位的應力分布進行了分析,，獲得了玉米種子在不同施力部位壓載作用下的微觀力學性質，從而為深入研究玉米種子的力學性質、損傷機理,、優化脫粒機械提供理論依據,。經模型計算和試驗結果相比較,得出種子的宏觀破裂位置和破裂方向與模擬結果相吻合,種子的宏觀破裂是由內部裂紋引起,。

Abstract:

The geometric model and the finite element model with the measured results for corn seed were established. The stress distribution of corn seed was analyzed under different pressing locations and different pressing loads by the finite element method. The microcosmic mechanical properties of corn seed under different pressing locations and different pressing loads were obtained, which could be provided as mechanical parameters for further studying mechanical properties and damage mechanism of corn seed and optimizing threshing machine. It could be concluded that breaking position and breaking direction of corn seed accorded to simulating result and microcosmic crack of corn seed aroused macroscopic breakage after the comparison was made with the model calculation and the experimental results.

參考文獻

相似文獻

引證文獻

引用本文

李心平,高連興,馬福麗.玉米種子力學特性的有限元分析[J].農業機械學報,2007,38(10):64-67.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(10):64-67.

復制

文章指標

點擊次數:
下載次數:
HTML閱讀次數:
引用次數:

歷史

收稿日期:
最后修改日期:
錄用日期:
在線發布日期:
出版日期:

期刊瀏覽

EI收錄結果

引用本文

分享

文章指標

歷史

文章二維碼