The composing and the function of every part of hardware-in-the-loop simulation system of steer-by-wire technologies on wheel loader were presented. The proportional relief valve to simulate the load of the system was introduced. Making use of the means of transfer function, the mathematics model of the system was built, and with the model, the system has been simulated, then the PID parameters in Matlab were regulated. An experiment was carried out on the hardware-in-the-loop simulation system to test the response with different input signals and loads. The result showed that it is well simulated the load by means of proportional relief valve, validated the feasibility of the use of steer-by-wire technologies on wheel loader.
參考文獻
相似文獻
引證文獻
引用本文
王同建,胡靜波,瞿愛琴,張子達.裝載機線控轉向系統硬件在線回路仿真[J].農業機械學報,2007,38(10):15-19.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(10):15-19.