灌水器注塑模澆注系統計算機輔助設計

doi:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

首頁 > 過刊瀏覽>2007年第38卷第5期 >66-68. DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

灌水器注塑模澆注系統計算機輔助設計
DOI:
                        10.3969/j.issn.1000-1298.[year].5.[sequence]
                    
CSTR:
                        
                    
作者:
                        
                        
                    
作者單位:
作者簡介:
通訊作者:
中圖分類號:
基金項目:

Author:

Affiliation:

Fund Project:

摘要

圖/表

訪問統計

參考文獻

相似文獻

引證文獻

資源附件

文章評論

摘要:

根據灌水器注塑模非平衡澆注系統的特點，給出了非平衡澆注系統的流動平衡數學模型,，通過基于Pro/toolkit的二次開發,，在Pro/E軟件平臺上實現了非平衡澆注系統的流動平衡計算及其自動生成,，避免了反復的試模與修改，提高了設計效率,，降低了生產成本。

Abstract:

According to the characteristic of a non-balance runner system of emitter injection mold, a mathematical model for flow balance of a non-balance runner system is given. Based on the secondary development of Pro/toolkit, the calculation and automatic molding balance flow of the non-balance runner system was carried out on Pro/E software platform, which avoided repeatedly try and mold modification. Therefore, the design efficiency is promoted, and the production cost is reduced.

參考文獻

相似文獻

引證文獻

引用本文

王建和,史玉升,魏青松,董文楚,黃樹槐.灌水器注塑模澆注系統計算機輔助設計[J].農業機械學報,2007,38(5):66-68.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(5):66-68.

復制