A new type of fluidized bed system, in which a plasma flow jet was used as the major heating source and the electro-thermal as heat preservation, was developed, tested and improved according to a series of experiments. A two-step pulverized biomass feeder was designed to maintain feeding uniformly. The minimum fluidizing velocity and operating fluidizing velocity were obtained by experiments at cooling conditions. The studies on corn stalk showed that the feeding velocity and temperature had impacts on the yields of bio-oil which grew with the increasing of feeding velocity and went up at first and then declined with the temperature rising. The bio-oil yield occurred at about 477℃.
參考文獻
相似文獻
引證文獻
引用本文
李志合,易維明,李永軍.等離子體加熱流化床反應器的設計與實驗[J].農業機械學報,2007,38(4):66-69.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(4):66-69.